ScummVM Controlller Issues
-
im going to try to start over ...
im going to discconect my keyboard and mouse and see if anything changes
-
ok after typing (With Disconnected keyboard and mouse )
cat /proc/bus/input/devices
my event changed to 0
event0
-
@escc1986 yes thats right.
the event will change as things are plugged in and outso is you dont play to have a keyboard in there full time best to set if for event 0
-
thank you for informing me , i had no idea ....
ok can you clear this up with me
which setting do i use out of these 3 settings :
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv
--evdev /dev/input/by-id/[•]
--silent
--detach-kernel-driver
--force-feedback
--deadzone-trigger 15%
--deadzone 4000
--mimic-xpad
--evdev-absmap ABS_[•]=x1,ABS_[•]=y1,ABS_[•]=x2,ABS_[•]=y2,ABS_[•]=lt,ABS_[•]=rt,ABS_[•]=dpad_x,ABS_[•]=dpad_y
--evdev-keymap BTN_[•]=a,BTN_[•]=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_[•]=tl,BTN_[•]=tr,BTN_[•]=guide,BTN_[•]=back,BTN_[•]=start
&sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv
--evdev /dev/input/by-id/[•]
--silent
--detach-kernel-driver
--force-feedback
--deadzone-trigger 15%
--deadzone 4000
--mimic-xpad
--dpad-as-button
--evdev-absmap ABS_[•]=x1,ABS_[•]=y1,ABS_[•]=x2,ABS_[•]=y2,ABS_[•]=lt,ABS_[•]=rt
--evdev-keymap BTN_[•]=a,BTN_[•]=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_[•]=tl,BTN_[•]=tr,BTN_[•]=guide,BTN_[•]=back,BTN_[•]=start,BTN_[•]=du,BTN_[•]=dd,BTN_[•]=dl,BTN_[•]=dr
&sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv
--evdev /dev/input/by-id/[•]
--silent
--detach-kernel-driver
--force-feedback
--deadzone-trigger 15%
--deadzone 4000
--mimic-xpad
--evdev-absmap ABS_[•]=dpad_x,ABS_[•]=dpad_y
--evdev-keymap BTN_[•]=a,BTN_[•]=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_[•]=back,BTN_[•]=start
--dpad-only
--ui-axismap lt=void,rt=void
--ui-buttonmap tl=void,tr=void,guide=void
& -
just dont know which template to follow that is correct for my nes controller
that i will need to make a nano for
nano /etc/rc.local
-
@escc1986
i say go for the last one
you can always cut stuff outand stay out of rc.local
-
you will be doing your work in the runcommand.onstart
-
kind of confused .... so i
sudo nano /opt/retropie/configs/all/runcommand-onstart.sh
(This template)
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv
--evdev /dev/input/by-id/[•]
--silent
--detach-kernel-driver
--force-feedback
--deadzone-trigger 15%
--deadzone 4000
--mimic-xpad
--evdev-absmap ABS_[•]=dpad_x,ABS_[•]=dpad_y
--evdev-keymap BTN_[•]=a,BTN_[•]=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_[•]=back,BTN_[•]=start
--dpad-only
--ui-axismap lt=void,rt=void
--ui-buttonmap tl=void,tr=void,guide=void
& -
close
you need this on the top or it will not know when to start the mappingif [ "$1" = "scummvm" ] then sudo killall >> /dev/shm/runcommand.log 2>&1 xboxdrv sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv >> /dev/shm/runcommand.log 2>&1 \ --evdev /dev/input/by-id/[•] \ -
https://retropie.org.uk/docs/Universal-Controller-Calibration-&-Mapping-Using-xboxdrv/
go to the
Key-Mapping For Individual Emulators part to get a start on how the runcommand needs to look like
but for now i think you should just put your mapping in a txt on your computer.
there are ways to test it before you setup the run command
-
not sure what to put here
--evdev /dev/input/by-id/[•] \
(the dot)
-
@escc1986
just use the event and the number so for you it will be event0
i could never get the id-to workthink you could send me a link or something for your controller.
when you posted the event codes there are alot more buttons then i would of thought for a NES -
--evdev /dev/input/by-id/event0 \
like so ?
-
@escc1986 said in ScummVM Controlller Issues:
~~--evdev /dev/input/by-id/event0 ~~
--evdev /dev/input/event0 \ -
my mistake , thank you ...
will send you the link now of my controller ...
is this ok :
if [ "$1" = "scummvm" ]
then
sudo killall >> /dev/shm/runcommand.log 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv >> /dev/shm/runcommand.log 2>&1
--evdev /dev/input/even0
--silent
--detach-kernel-driver
--force-feedback
--deadzone-trigger 15%
--deadzone 4000
--mimic-xpad
--evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y
--evdev-keymap BTN_SOUTH=a,BTN_EAST=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_TL2=back,BTN_TR2=start
--dpad-only
--ui-axismap lt=void,rt=void
--ui-buttonmap tl=void,tr=void,guide=void
& -
@escc1986 said in ScummVM Controlller Issues:
my mistake , thank you ...
will send you the link now of my controller ...
is this ok :
if [ "$1" = "scummvm" ]
then
sudo killall >> /dev/shm/runcommand.log 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv >> /dev/shm/runcommand.log 2>&1
--evdev /dev/input/even0
--silent
--detach-kernel-driver
--force-feedback
--deadzone-trigger 15%
--deadzone 4000
--mimic-xpad
--evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y
--evdev-keymap BTN_SOUTH=a,BTN_EAST=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_TL2=back,BTN_TR2=start
--dpad-only
--ui-axismap lt=void,rt=void
--ui-buttonmap tl=void,tr=void,guide=void
&need to fix the event. should be
event0 \ -
ok i lied , there are 2 other buttons on the top an L and an R , im sorry i didnt include them ... i just wanted it to be simple with less buttons to map
controller link
-
thats fine, i was just looking at it and was theres alot here. lol
-
sorry should of sent this
-
it all good, lol
--evdev-keymap KEY_#305=a,KEY_#304=b,KEY_#307=x,KEY_#308=y,KEY_#310=tl,KEY_#311=tr,KEY_#314=back,KEY_#315=start \this is your keymap for the controller.
now with
--ui-buttonmap a=BTN_LEFT,b=BTN_RIGHT,start=KEY_F5,back=KEY_ESC \you map what said buttons will do
again im still messing with the dpad
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.