Problema Controlblock rev2.1

[Mario]

Hola a todos, tengo una raspberry pi3 b y un controlcblock rev2.1
Version oficial de Retropie: retropie-4.5.1-rpi2_rpi3
Dispositivo USB: teclado USB

Instalo todo siguiendo estos pasos:
https://github.com/petrockblog/ControlBlockService2#downloading

Errores:
acceso denegado: /etc/controlblock config.cfg
Los botones no se reconocen y el interruptor no funciona correctamente.

pueden ayudarme?

Un saludo.

[Mario]

Hola de nuevo, adjunto foto del controlblock.

agradezco cualquier ayuda.

Saludos.

[chicuelo]

Escribi tu consulta en ingles Mario, acá nadie te va a responder en español. Proba buscar en YouTube alguna solucion

[Mario]

Muchas gracias por tu interes.

[Mario]

Hi everyone, I have a raspberry pi3 b and a controlcblock rev2.1
Official version of Retropie: retropie-4.5.1-rpi2_rpi3
USB device: USB keyboard

I install everything by following these steps:
https://github.com/petrockblog/ControlBlockService2#downloading

Mistakes:
access denied: /etc/controlblock config.cfg
The buttons are not recognized and the switch does not work properly.

can you help me?

A greeting.

[mitu]

@Mario Try installing the driver from the RetroPie-Setup script, from the drivers section, then enable the service if installation is fine.

[Mario]

@mitu Thank you very much, tomorrow I will try.
Greetings.

[Mario]

@mitu I still have the same problems, i'm sure I'm still doing something wrong.

I follow these steps first:
sudo apt-get update
sudo apt-get dist-upgrade
sudo apt-get install git

cd
git clone --depth=1 https://github.com/RetroPie/RetroPie-Setup.git

cd RetroPie-Setup
sudo ./retropie_setup.sh

Finally I follow these steps:
git clone --recursive https://github.com/petrockblog/ControlBlockService2.git
cd ControlBlockService2
mkdir build
cd build
cmake ..
make
sudo make install
sudo make installservice

I apologize for my ignorance, any ideas?
Greetings and thank you.

[mitu]

If you already have a RetroPie image, you just need to start the setup script, then go to Manage packages -> Manage driver packages and you can install the controlblock package from there.

[Mario]

Hello everyone, in the end I will use Recalbox with two USB interfaces.
For me it is much easier.

Thank you all for the help, best regards.