RPi 3B, LE 7.0.3 (RetroPie), How to enable composite output?
-
Hi.
The kids have a Samsung 55" LED and all the hdmi inputs just died.
I use a RPi 3B as HTPC with LE 7.0.3 (RetroPie) and i do not get the composite output to work, no image at all on the TV, do not light up the input option for composite.
Have done some googling and searching at the forum but do not find any good answer.
I live in Sweden so the tv might be PAL restricted.
-
Normally the Pi should switch to composite if the HDMI port is not connected, but you can force PAL by adding
sdtv_mode=2to theconfig.txtconfiguration file.
Assuming your composite cable is correct and you've switched the TV input to the RCA input, you should get an image.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.