Mad Dog McCree Dos Box Help
My Attempt at Trying To Install An ISO on Dosbox
Then i Came to a Halt
last picture don't know what to do from here ..
after i installed it & Exited the game , i dont know how to restart the game.
After The Game was playing for the first time (after installation)
I Exited The Game
I Then Did a Restart of Emulationstation (Retropie)
I Went to Ms Dos and the 2 options appear (+START DOSBOX & MADDOG)
-I Click on Maddog
then it brought me to the page (you see in the last picture)
Please Help ?
@escc1986 why have I been tagged?
@BuZz yes i tagged you .
i tagged you to bring my post to your attention and others due to i have seen other dobox tutorials and you have seemed to help ... hope you may help , but my apologies for any bother
Im in need of Help Very Similar to this Post
i got the it on a atuoexec.bat
[autoexec] @ECHO OFF MOUNT -u C MOUNT C /media/usb0/roms/pcwin/MADDOGMC IMGMOUNT D /media/usb0/roms/pcwin/MADDOGMC/CD/MADDOG.ISO -t iso c: cd MadDog > NUL cls maddog exit
change the names for the directory and see that u got the cd iso with that
hope it helps good luck :)
MOUNT -u C
MOUNT C /media/usb0/roms/pcwin/MADDOGMC
IMGMOUNT D /media/usb0/roms/pcwin/MADDOGMC/CD/MADDOG.ISO -t iso
cd MadDog > NUL
Any Chance you can change the Directorys to fit my pi ... it didnt work for me when i tried
my results were the same page as the last picture .
or anyway you could make me .bat file ....
shavecat last edited by shavecat
here u go change your file to that -
[autoexec] @ECHO OFF MOUNT -u C MOUNT C /home/pi/RetroPie/roms/pc/MADDOGMC IMGMOUNT D /home/pi/RetroPie/roms/pc/MADDOGMC/CD/MADDOG.ISO -t iso c: cd MadDog > NUL cls maddog exit
Just put your MADDOG folder in that name folder in the pc folder .
and cd iso image in a folder -
pay attention all the names need to be the same (with big letters)
or u can change it.
hope it helps ;)
I Appreciate This Thank you
i will give it a try ...
i didnt get it to work :(
However this Method Worked
I guess the only Problem now is i am not getting any sound or volume
Any Tips or Suggesting ?
i also have a freeze up regarding the sound issue
hows everything on your end , did you have sound issues ?
hey glad u got it working !
no sound issues on my side , that u need to check :)
u know u also have the same game in sega-cd ...
Thank you , very nice words from you ... yeahh its great to finally get it to work .... i like this version alot since dos is where i played this game as a young lad
yeah no sound for me ... im going to see if i can reinstall and take a picture of the sound settings ? maby you can recoomend me a settings for soundblaster ?
ok right now im at the Sound Settings of the installation screen for " Mad Dog McCree " game
What Settings Do You Prefer ?
shavecat last edited by shavecat
Got to say i never change anything there in the sound options or even go there.
check another msdos game , u have sound with it ?
this is my dosbox-SVN.conf - (in the folder retropie/configs/pc)
# This is the configuration file for DOSBox SVN. (Please use the latest version of DOSBox) # Lines starting with a # are comment lines and are ignored by DOSBox. # They are used to (briefly) document the effect of each option. [sdl] # fullscreen: Start dosbox directly in fullscreen. (Press ALT-Enter to go back) # fulldouble: Use double buffering in fullscreen. It can reduce screen flickering, but it can also result in a slow DOSBox. # fullresolution: What resolution to use for fullscreen: original, desktop or a fixed size (e.g. 1024x768). # Using your monitor's native resolution with aspect=true might give the best results. # If you end up with small window on a large screen, try an output different from surface.On Windows 10 with display scaling (Scale and layout) set to a value above 100%, it is recommended # to use a lower full/windowresolution, in order to avoid window size problems. # windowresolution: Scale the window to this size IF the output device supports hardware scaling. # (output=surface does not!) # output: What video system to use for output. # Possible values: surface, overlay. # autolock: Mouse will automatically lock, if you click on the screen. (Press CTRL-F10 to unlock) # sensitivity: Mouse sensitivity. The optional second parameter specifies vertical sensitivity (e.g. 100,-50). # waitonerror: Wait before closing the console if dosbox has an error. # priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized. # pause is only valid for the second entry. # Possible values: lowest, lower, normal, higher, highest, pause. # mapperfile: File used to load/save the key/event mappings from. Resetmapper only works with the default value. # usescancodes: Avoid usage of symkeys, might not work on all operating systems. fullscreen = true fulldouble = false fullresolution = desktop windowresolution = original output = overlay autolock = true sensitivity = 100 waitonerror = true priority = higher,normal mapperfile = mapper-SVN.map usescancodes = false [dosbox] # language: Select another language file. # machine: The type of machine DOSBox tries to emulate. # Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe. # captures: Directory where things like wave, midi, screenshot get captured. # memsize: Amount of memory DOSBox has in megabytes. # This value is best left at its default to avoid problems with some games, # though few games might require a higher value. # There is generally no speed advantage when raising this value. language = machine = svga_s3 captures = capture memsize = 16 [render] # frameskip: How many frames DOSBox skips before drawing one. # aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down! # scaler: Scaler used to enlarge/enhance low resolution modes. If 'forced' is appended, # then the scaler will be used even if the result might not be desired. # To fit a scaler in the resolution used at full screen may require a border or side bars, # to fill the screen entirely, depending on your hardware, a different scaler/fullresolution might work. # Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x. frameskip = 0 aspect = false scaler = none [cpu] # core: CPU Core used in emulation. auto will switch to dynamic if available and # appropriate. # Possible values: auto, dynamic, normal, simple. # cputype: CPU Type used in emulation. auto is the fastest choice. # Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch. # cycles: Amount of instructions DOSBox tries to emulate each millisecond. # Setting this value too high results in sound dropouts and lags. # Cycles can be set in 3 ways: # 'auto' tries to guess what a game needs. # It usually works, but can fail for certain games. # 'fixed #number' will set a fixed amount of cycles. This is what you usually # need if 'auto' fails (Example: fixed 4000). # 'max' will allocate as much cycles as your computer is able to # handle. # Possible values: auto, fixed, max. # cycleup: Amount of cycles to decrease/increase with keycombos.(CTRL-F11/CTRL-F12) # cycledown: Setting it lower than 100 will be a percentage. core = dynamic cputype = auto cycles = max cycleup = 10 cycledown = 20 [mixer] # nosound: Enable silent mode, sound is still emulated though. # rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality. # Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716. # blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged. # Possible values: 1024, 2048, 4096, 8192, 512, 256. # prebuffer: How many milliseconds of data to keep on top of the blocksize. nosound = false rate = 44100 blocksize = 1024 prebuffer = 25 [midi] # mpu401: Type of MPU-401 to emulate. # Possible values: intelligent, uart, none. # mididevice: Device that will receive the MIDI data from MPU-401. # Possible values: default, win32, alsa, oss, coreaudio, coremidi, none. # midiconfig: Special configuration options for the device driver. This is usually the id or part of the name of the device you want to use (find the id/name with mixer/listmidi). # Or in the case of coreaudio, you can specify a soundfont here. # When using a Roland MT-32 rev. 0 as midi output device, some games may require a delay in order to prevent 'buffer overflow' issues. # In that case, add 'delaysysex', for example: midiconfig=2 delaysysex # See the README/Manual for more details. mpu401 = intelligent mididevice = alsa midiconfig = 128:0 [sblaster] # sbtype: Type of Soundblaster to emulate. gb is Gameblaster. # Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none. # sbbase: The IO address of the soundblaster. # Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300. # irq: The IRQ number of the soundblaster. # Possible values: 7, 5, 3, 9, 10, 11, 12. # dma: The DMA number of the soundblaster. # Possible values: 1, 5, 0, 3, 6, 7. # hdma: The High DMA number of the soundblaster. # Possible values: 1, 5, 0, 3, 6, 7. # sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer. # oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'. # Possible values: auto, cms, opl2, dualopl2, opl3, opl3gold, none. # oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well). # Possible values: default, compat, fast, mame. # oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly). # Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000. sbtype = sb16 sbbase = 220 irq = 7 dma = 1 hdma = 5 sbmixer = true oplmode = auto oplemu = default oplrate = 44100 [gus] # gus: Enable the Gravis Ultrasound emulation. # gusrate: Sample rate of Ultrasound emulation. # Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716. # gusbase: The IO base address of the Gravis Ultrasound. # Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300. # gusirq: The IRQ number of the Gravis Ultrasound. # Possible values: 5, 3, 7, 9, 10, 11, 12. # gusdma: The DMA channel of the Gravis Ultrasound. # Possible values: 3, 0, 1, 5, 6, 7. # ultradir: Path to Ultrasound directory. In this directory # there should be a MIDI directory that contains # the patch files for GUS playback. Patch sets used # with Timidity should work fine. gus = false gusrate = 44100 gusbase = 240 gusirq = 5 gusdma = 3 ultradir = C:\ULTRASND [speaker] # pcspeaker: Enable PC-Speaker emulation. # pcrate: Sample rate of the PC-Speaker sound generation. # Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716. # tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'. # Possible values: auto, on, off. # tandyrate: Sample rate of the Tandy 3-Voice generation. # Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716. # disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible). pcspeaker = true pcrate = 44100 tandy = auto tandyrate = 44100 disney = true [joystick] # joysticktype: Type of joystick to emulate: auto (default), none, # 2axis (supports two joysticks), # 4axis (supports one joystick, first joystick used), # 4axis_2 (supports one joystick, second joystick used), # fcs (Thrustmaster), ch (CH Flightstick). # none disables joystick emulation. # auto chooses emulation depending on real joystick(s). # (Remember to reset dosbox's mapperfile if you saved it earlier) # Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none. # timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away). # autofire: continuously fires as long as you keep the button pressed. # swap34: swap the 3rd and the 4th axis. Can be useful for certain joysticks. # buttonwrap: enable button wrapping at the number of emulated buttons. # circularinput: enable translation of circular input to square output. # Try enabling this if your left analog stick can only move in a circle. # deadzone: the percentage of motion to ignore. 100 turns the stick into a digital one. joysticktype = auto timed = true autofire = false swap34 = false buttonwrap = false circularinput = false deadzone = 10 [serial] # serial1: set type of device connected to com port. # Can be disabled, dummy, modem, nullmodem, directserial. # Additional parameters must be in the same line in the form of # parameter:value. Parameter for all types is irq (optional). # for directserial: realport (required), rxdelay (optional). # (realport:COM1 realport:ttyS0). # for modem: listenport (optional). # for nullmodem: server, rxdelay, txdelay, telnet, usedtr, # transparent, port, inhsocket (all optional). # Example: serial1=modem listenport:5000 # Possible values: dummy, disabled, modem, nullmodem, directserial. # serial2: see serial1 # Possible values: dummy, disabled, modem, nullmodem, directserial. # serial3: see serial1 # Possible values: dummy, disabled, modem, nullmodem, directserial. # serial4: see serial1 # Possible values: dummy, disabled, modem, nullmodem, directserial. serial1 = dummy serial2 = dummy serial3 = disabled serial4 = disabled [dos] # xms: Enable XMS support. # ems: Enable EMS support. The default (=true) provides the best # compatibility but certain applications may run better with # other choices, or require EMS support to be disabled (=false) # to work at all. # Possible values: true, emsboard, emm386, false. # umb: Enable UMB support. # keyboardlayout: Language code of the keyboard layout (or none). xms = true ems = true umb = true keyboardlayout = auto [ipx] # ipx: Enable ipx over UDP/IP emulation. ipx = false [autoexec] # Lines in this section will be run at startup. # You can put your MOUNT lines here.
and i have a *.sh fie that ruining the config of that before like that -
maddogmc.sh (in just the PC FOLDER)
#!/bin/bash /opt/retropie/emulators/dosbox/bin/dosbox -conf /opt/retropie/configs/pc/dosbox-SVN.conf -conf /home/pi/RetroPie/roms/pc/MADDOGMC/AUTOEXEC.BAT -exit
try add this files with the data inside , and run the *.sh file.
hope it will make it work ;)
/opt/retropie/emulators/dosbox/bin/dosbox -conf /opt/retropie/configs/pc/dosbox-SVN.conf -conf /home/pi/RetroPie/roms/pc/MADDOGMC/AUTOEXEC.BAT -exit
Thanks for the advice
unfortuly it didnt work the .sh file you advised ...
i dont know whats wrong with the sound in dosbox ...
i tried with
have u tired other games ?
that u got sound on the msdos ?
yeah i relized i didnt have sound in any other game ..
i only have
3 dosbox games
(all light gun games for those 3 consoles )
then i went to the audio setting in Retropie and selected default ...
i got my sound back in all games , except dosbox (no audio or sound )
i dont know if its my set up but all the audio is either choppy or cracking
but dosbox ... no sound at all
mad dog 1
mad dog 2
who shot johnny rock
no sound in the dosbox games
choppy sounds psx games
cracking sounds in the mame games
any suggestings ... do you need me to pull up any logs or something so you can see or any pictures of anything ?
Sorry dont know whats the deal :\
yeah , sorry for that .... i dont know either ...
maby i should start fresh all over with a stock image and try all over huh ?