Game won't launch via .sh file on Retropie with Dosbox emulator

mitu

EmulationStation recognizes .conf files already, so you don't need to create an additional .sh file to launch the game.

Unless is a typo, you shouldn't have spaces around the path separator (/):

mount c / home / pi / RetroPie / roms / pc / all

should be

mount c /home/pi/RetroPie/roms/pc/all

If it's just a typo, post the contents of /dev/shm/runcommand.log, where any errors from dosbox should be displayed. You can starting Dosbox only (no game) and type the commands you have put in the [autoexec] section of the .conf, to see if you get any errors.

wood12

@mitu Thanks for the quick response.
There are no spaces in the file. I posted my files above in the post!

Unfortunately I don't know how to get data from this file and how to get to it ... I'm newbie, sorry.
/dev/shm/runcommand.log

mitu

@wood12 How did you edit the .conf/.sh files ? Did you use File Shares or did you enable SSH ?

You can look at the files on your system using the File Manager in RetroPie - you browse to the /dev/shm folder and then look at the runcommand.log file. The file is present only after you launch a game - so first launch the game, wait for the error to occur, then open the file from the File Manager (F3 I think will view the file).

wood12

@mitu I edited and created all files through Windows with an ordinary text editor (.txt)

Спасибо за объяснение вот содержание runcommand.log фала:

mitu

OK, we're getting somewhere.

Install the dosbox-sdl2 package, this will add the fluidsynth soundfonts that cause the timidity error
Remove everything from the .conf file, except the part that you posted here:

[sdl]
mapperfile = aliencarnage.map

[autoexec]
MOUNT c / home/pi/RetroPie/roms/pc/all
C:
CD AlienCarnage
carnage.exe
EXIT

After these steps, re-launch the game and see if it works.

EDIT: when posting log/text files, use pastebin.com, don't zip the files and upload them - it's easier to look at the text online, without downloading/unpacking an archive first.

wood12

Installed dosbox-sdl2 package
Remove unnecessary from the .conf file

Next, I rebooted EmulationStation and tried to launch the game via the .sh file. The game still doesn't work.

Here is the content of the runcommand.log file:

mitu

@wood12 said in Game won't launch via .sh file on Retropie with Dosbox emulator:

Next, I rebooted EmulationStation and tried to launch the game via the .sh file. The game still doesn't work.

Use the .conf file - with the contents I mentioned earlier to launch the game. Remove the .sh file.

wood12

@mitu Understood, I deleted the AlienCarnage .sh file, but you understand that I need some kind of shortcut in the general directory to launch each game in order to bypass the search for a /home/pi/RetroPie/roms/pc/all/AlienCarnage/ AlienCarnage .conf file in each game folder to launch it.

I did as you said:
Deleted AlienCarnage .sh file
I went to the folder with the game, which is located and launched it through the AlienCarnage .conf file

The game did not start, here is the log:

mitu

You can copy the .conf file in the pc folder directly, the .conf file doesn't have to be in the game's folder. This way the game can be launched directly from the PC gamelist.

In fact, if you want to organize things, you can create a roms/pc-games folder and store the game there.This folder is not shown in EmulationStation, you can just add .conf - files for each game - in the pc folder. Of course, you'll have to adjust the [autoexec] section in the .conf to point to roms/pc-games.

About the log file - the only error I see is the resolution message (Cannot detect..), but Dosbox appears to start correctly. Is the game still not launching ?

wood12

@mitu I understand you, and I'll do it: I will leave the AlienCarnage .conf file in the pc folder and I moved all the folders with games to the pc-games folder to the level with the pc folder.
Next, I changed in the AlienCarnage .conf file the paths to the aliencarnage .map and carnage .exe file of the game launch:

[sdl]

mapperfile=/home/pi/RetroPie/roms/pc-games/AlienCarnage/aliencarnage.map

[autoexec]

MOUNT c /home/pi/RetroPie/roms/pc-games
C:
CD AlienCarnage
carnage.exe
EXIT

Next, I rebooted EmulationStation. The game did not start!
Here is the log:

mitu

@wood12 said in Game won't launch via .sh file on Retropie with Dosbox emulator:

Next, I rebooted EmulationStation. The game did not start!

OK, so what exactly does happen - do you see the Dos prompt, do you see any errors reported on screen, are you booted back to EmulationStation, etc. ?

wood12

@mitu Nothing happens, it just doesn't start and that's it ...
Here is the launch video, take a look!

mitu

Ok, so you're booted back to EmulationStation. This would be the time to apply what I said earlier:

You can starting Dosbox only (no game) and type the commands you have put in the [autoexec] section of the .conf, to see if you get any errors.

But my bet is that the folder name is at fault - it's too long for DOS. Try renaming the game folder to something shorter - AlienC for instance - and adjust the .conf file.

wood12

@mitu You were right, the problem is in the too long name of the game folder. After renaming, the game started! I even edited the .conf file to add the rest of the performance specs for this game and everything still works. Many thanks for the help!

There was a very small question about launching games through .sh, which, as it turned out, does not work in EmulationStation and I deleted it earlier. The fact is that games are launched through it that require a disc in the drive. How then to get out of the situation? Where and what to register if there is no .sh file?

In it, the code for running games with SD was published as follows:

#!/bin/bash
/opt/retropie/emulators/dosbox/bin/dosbox -c "mount c ~/RetroPie/roms/pc-games" -c "c:" -c "cd LBA/cd" -c "imgmount d LBA.BIN -t iso" -c "cd .." -c "call LBA.EXE" -c "exit"

mitu

@wood12 if you look at the launching command, you can take anything that's added via the -c parameter and stuff it in the [autoexec] section of the .conf.
The command

/opt/retropie/emulators/dosbox/bin/dosbox -c "mount c ~/RetroPie/roms/pc-games" -c "c:" -c "cd LBA/cd" -c "imgmount d LBA.BIN -t iso" -c "cd .." -c "call LBA.EXE" -c "exit"

can be translated into the following .conf file (a bit simplified)

[autoexec]
mount c ~/RetroPie/roms/pc-games
c:
cd LBA
imgmount d CD\lba.bin -t iso
LBA.EXE
exit

wood12

@mitu The way you advised works!
Thank you again for the quick answers to my possibly stupid questions.)

I think that this topic can be closed!

wood12

@mitu There was also a problem to mount the CDROM, and not the ISO or BIN disk image!

I created a folder where the game is located (/home/pi/RetroPie/roms/pc-games/Rayman/) and it contains a folder with a disk, which I named cdrom.

But the commands that I registered in [autoexec] do not work and the game does not start:

[autoexec]

MOUNT c /home/pi/RetroPie/roms/pc-games
c:
cd Rayman
MOUNT d cdrom -t cdrom
RAYMAN.EXE
EXIT

What did I do wrong?

mitu

What's the error message ?

wood12

@mitu

mitu

You need to specify the correct path to mount, just like you did when mounting the c drive

mount D /home/pi/RetroPie/roms/pc-games/Rayman/cdrom -t cdrom