Guide: Advanced Controller Mappings

spud11

@mediamogul Thanks. In fact, I wound up having to reinstall linapple because something else was going on, and it appears that it's now working properly with xboxdrv after reinstallation, so all good.

mediamogul

@spud11

Glad to hear it. It's also good to see that all this mapping nonsense has become second nature. I agree with you about the standalone emulators. The RetroArch ports are very convenient and have their own set of advantages, but they always seem to lack so many features that their standalone counterparts have had for years. That said, it's great to have both options available.

spud11

@mediamogul Hi. I had a look through the thread and tried a search too, but it is now so long I couldn't find what I was looking for.

Could you please let me know whether you mapped your F710 directly via Reicast's config program or whether you mapped a keyboard via Reicast's config program and then used xboxdrv to map the keyboard to the F710?

I've tried mapping my Dragonrise Arcade joystick via Reicast's config program, and that does work, but that will only allow me to map 1 dpad or the analog controls, not both dpads and the analog controls.

So I thought I would use Reicast's config program to map my bluetooth keyboard. That allowed me to map both dpads but not the analog controls. From there, I thought I might be able to use xboxdrv to map things so that I could use a toggle so that I could shift from dpad1 to dpad2 using the same joystick. Although xboxdrv seems to be working in the background, the arcade joystick and buttons aren't doing anything at all. I haven't fully tested it out yet, but it did make me think: does xboxdrv even work with Reicast or is it "a bridge too far"? Any help would be appreciated. Thanks.

mediamogul

@spud11

I haven't used Reicast in a while and I currently have it uninstalled, but I believe I just used the the default method for mapping. If I remember correctly, Reicast needs the joystick to be analog, so a straight key-map wouldn't work. You should be able to create a toggle that switches your joystick between analog and a key-map, but I think you'd still need to configure Reicast to find the analog stick. When you key-mapped before, was it just the joystick not being read, or were the buttons unresponsive as well?

spud11

@mediamogul Thanks very much.

I went back to the default method - scrubbed the keyboard idea, and now I've reconfigured the joystick using the default method. First time I ignored the dpads and only mapped the analog stick. Second time I mapped both dpads and the analog stick to the joystick. (The configuration program allows you to map more than one button or axis to the same thing which is a bit weird).

However, in both examples, the analog stick doesn't seem to work. Some games like Trizeal seem to rely on the analog stick and some like NBA Showdown require dpad1. The latter works, but the former doesn't so it appears the analog controls aren't being mapped properly to the DragonRise joystick, despite registering during the default configuration process. All the fire buttons work in both cases.

It's a bit of a pity. I'd really like to get the exit button/key mapped to select + start using xboxdrv like almost every other emulator I have. On my arcade table, it's really easy to press the exit button accidentally with reicast's default config.

Current mapping with both dpads and analog stick mapped to the joystick:

[emulator]
mapping_name = DragonRise Inc.   Generic   USB  Joystick  
btn_escape = 296

[dreamcast]
btn_a = 290
btn_b = 293
btn_c = 288
btn_d = 289
btn_x = 292
btn_y = 291
btn_z = 298
btn_start = 299
axis_x = 1
axis_y = 0

[compat]
axis_dpad1_x = 1
axis_dpad1_x_inverted = no
axis_dpad1_y = 0
axis_dpad1_y_inverted = yes
axis_dpad2_x = 1
axis_dpad2_x_inverted = no
axis_dpad2_y = 0
axis_dpad2_y_inverted = yes
btn_trigger_left = 295
axis_x_inverted = no
axis_y_inverted = yes

mediamogul

@spud11

I've held off on responding, hoping that I'd find some time to do some personal experimenting here, but the hammers just keep falling. One idea that's worth entertaining if you haven't already tried it, is having that particular xboxdrv map activated in Emulation Station and running the joystick configuration. Seeing as how it is now supposed to configure Reicast controls automatically, it might make some small difference that would allow it to work.

spud11

@mediamogul Thanks for that. Unfortunately, I'm actually only using Attract Mode now. I still have Emulation Station installed but haven't used that for quite some time, so I'm unsure what you mean by "xboxdrv map activated in Emulation Station".

spaceman1980

how would i go about making my dpad a mouse? I'm using the Loverpi snes controller and zdoom, and i would like to utilize the menus. thanks

mediamogul

@spaceman1980

how would i go about making my dpad a mouse?

So long as your DPad identifies as ABS events and not BTN, you would just use the same set of steps for mapping mouse movement to a joystick.

spud11

@mediamogul Hi. I'm currently using xboxdrv and moonlight together and trying both to quit a game and terminate the stream with the one key press.

Occasionally, I'm finding that if I quit a game, the stream continues. Built into Moonlight, you can quit a game with the ESC key and also quit the stream by holding down Shift-Control-Alt+Q.

By pressing the back + right trigger keys, I'm trying to get xboxdrv, first, to send the ESC key and, second, to send Shift-Control-Alt+Q, but cannot get it to work.

I've tried setting up a macro but the macro seems only to allow one key press at a time (eg press ESC, then press Shift etc) eg the following won't work:

send KEY_ESC 1
wait 100
send KEY_LEFTCTRL+KEY_LEFTSHIFT+KEY_LEFTALT+KEY_Q 1

I've also tried --ui-buttonmap back+rt=KEY_ESC+KEY_LEFTCTRL+KEY_LEFTSHIFT+KEY_LEFTALT+KEY_Q \, but that doesn't work.

I've tried having both --ui-buttonmap back+rt=KEY_ESC \ and --ui-buttonmap back+rt=KEY_LEFTCTRL+KEY_LEFTSHIFT+KEY_LEFTALT+KEY_Q \ in the one script. That doesn't work.

I see that you've previously set up key-cycles via xboxdrv and xboxdrv seems to allow key-sequences, but not sure how that works.

So at the moment I've got back+rt sending the Escape key and rt+back sending the Shift-Control-Alt+Q and I quickly press one after the other which works. It would just be nice to have back+rt do both with the one key press.

Would you have any insight please?

mediamogul

@spud11
Sorry it's taken me a while to get back to you, but I knew I was going to have to re-familiarize myself with a few things first. To tell you the truth, your current working arrangement is one I've settled on myself for a few tricky situations like this and there aren't a lot of alternatives. However, your key-cycle suggestion might just work to consolidate the commands to one button, albeit with two button presses. The cycle would look something like:

--ui-buttonmap back+rt=cycle-key:KEY_ESC:KEY_LEFTCTRL+KEY_LEFTSHIFT+KEY_LEFTALT+KEY_Q

Just like what you've tried already, it's possible that combinations can't be used in the cycle, but if it works, you should be able to press the button once for 'Escape' and again for 'CTRL+Shift+Q'.

spud11

@mediamogul Thanks, mediamogul, for taking the time. I can confirm that that worked - by pressing twice you get the Escape key followed by Shift-Ctrl-Alt Q.

One other possibility I was thinking of but not sure whether it's actually possible: bind another key eg the 'A' key to Shift-Ctrl-Alt Q, then in a macro have:

send KEY_ESC 1
wait 100
send KEY_A 1

(Something I regularly do using Autohotkey on Windows 7.)

mediamogul

@spud11 said in Guide: Advanced Controller Mappings:

One other possibility I was thinking...

I'm almost certain xboxdrv can't bind keyboard keys with other keys/key combinations, but if you could find an outside solution to handle that part, it should work well.

mediamogul

Something that's always bothered me about launching xboxdrv using runcommand-onstart.sh is that it makes using the Runcommand menu itself somewhat impossible. This is because the xboxdrv mapping is made active before the Runcommand menu appears, therefore interfering with the expected control scheme. Over the weekend, I've been experimenting with some ways around this.

First, I tried scripting the xboxdrv command not to launch until it detected that the intended emulator/port had launched. This worked well, except the script needed the specific executable name for the software it was looking for, making everything a little more laborous to set up than I felt it needed to be. I was prepared to live with it, until I noticed that AdvanceMame refused to recognized an xboxdrv simulated mouse event unless it was present before it launched. Seeing as how I play many games that rely on analog controls, it was important enough for me to rethink the approach.

What I needed was something that could be discovered from the runcommand-onstart.sh script that signals the launch of the Runcommand menu, yet yet also signals it's closing before the emulator/port software is launched. After taking a look at /opt/retropie/supplementary/runcommand/runcommand.sh, it looked as though it invoked and exited joy2key.py in exactly the way I needed. With a little more experimenting, I came up with the following that uses the xboxdrv example from the first section of my guide.

if [ "$2" = "advmame" ]; then
sudo killall > /dev/null 2>&1 xboxdrv
j2kpid="0"
until [ "$j2kpid" -gt "0" ]; do
j2kpid=$(pgrep -f joy2key.py)
sleep 1
done
while s=$(ps -p "$j2kpid" -o s=) && [ "$s" ] && [ "$s" != 'Z' ]; do
sleep 1
done
/opt/retropie/supplementary/xboxdrv/bin/xboxdrv > /dev/null 2>&1 \
	--evdev /dev/input/by-id/[•] \
	--silent \
	--detach-kernel-driver \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--evdev-absmap ABS_[•]=x1,ABS_[•]=y1,ABS_[•]=x2,ABS_[•]=y2,ABS_[•]=lt,ABS_[•]=rt,ABS_[•]=dpad_x,ABS_[•]=dpad_y \
	--evdev-keymap BTN_[•]=a,BTN_[•]=b,BTN_[•]=x,BTN_[•]=y,BTN_[•]=lb,BTN_[•]=rb,BTN_[•]=tl,BTN_[•]=tr,BTN_[•]=guide,BTN_[•]=back,BTN_[•]=start
fi &

This waits for joy2key.py to launch, gets it's PID and then waits for it to end before launching whatever emulator/port is being launched (advmame in this example). So, in effect, you can now launch a game, use the Runcommand window as intended if needed and xboxdrv will launch afterwards.

I've talked with so many people about xboxdrv on here that, unfortunately, a lot of it runs together. However, I do remember a few interested parties looking for a way to accomplish this, so I hope it helps. Granted there might be an easier, more effective way, so if anything comes to mind, please feel free to share.

mediamogul

I'm very stoked to say that I finally got the exec: argument to work in xboxdrv. This opens up a world of possibilities, as it allows any bash script to run at the press of a button, or button combo.

It's important that the script reside somewhere on the SD card Linux volume and at least have the common 755 user permissions. Also, since xboxdrv is normally running as root, it's a probably a good idea to preface any of the commands in the script with sudo --user=pi.

Below is an example that takes a screenshot using raspi2png by pressing 'Select' (Back) and the 'Y' button. This could be added to compliment any emulator, port, or system app that normally doesn't have a screenshot function.

Additional line to any xboxdrv command:

--ui-buttonmap back+y=exec:/home/pi/raspi2png.sh

raspi2png.sh (The script that is called above)

#!/bin/bash

DATE=$(date +%Y%m%d%H%M%S)
sudo --user=pi raspi2png -p "/home/pi/""$DATE"".png"

This creates screenshot in the home directory named using the current time. The timestamp naming allows each image to have a unique name, preventing them from overwriting each other.

This is just one example and the ability to run scripts from within any environment from the controller opens up a ton of possibilities. It was too involved to use as an example, but I was able to duplicate the multiple save state functionality found in RetroArch from within AdvanceMAME. Keen stuff!

spud11

@mediamogul That is very useful information indeed. It makes the whole runcommand scenario so much more flexible. No need to reserve runcommand-onstart purely for xboxdrv any longer.

mediamogul

@spud11

Another nice use case that I'm really liking is invoking a script that kills the current map and launches another. This is particularly useful for having a universal map for a game system that can switch on the fly between digital, analog and four-way restricted controls.

spud11

@mediamogul That's interesting. When and for what emulator do you use this? Could you please show an example?

mediamogul

@spud11 said in Guide: Advanced Controller Mappings:

When and for what emulator do you use this?

Almost any emulator could benefit from it, as a surprising amount of retro games play so much more smoothly with 4-way restricted controls, so the ability to toggle it on and off through the use of multiple maps is a great advantage. One unfortunate exception is AdvanceMAME, due to it only recognizing input that was available at launch. Amiberry has this same requirement, so it's out as well, but everything else I've tried so far works very well.

Could you please show an example?

Sure. Below is my Atari 2600 map for Stella that now has the following features combined.

8-way digital directional control (Dpad/Left Thumb)
4-way digital directional control (Dpad/Left Thumb)
Full analog directional control (Left Thumb with Modifier Toggle)
Full Atari Keypad control (Right Thumb with Modifier buttons)
Atari BoosterGrip control ('X' and 'A' buttons)
One button cycled difficulty switch for two players ('LB' and 'RB')
Stella user interface Control ('RT' Modifier)

default.sh Initial launch map:

#!/bin/bash

sudo killall xboxdrv
sleep 1
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.2:1.0-event-joystick \
	--detach-kernel-driver \
	--force-feedback \
	--dpad-as-button \
	--trigger-as-button \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--device-name "Logitech Rumblepad 2 (xboxdrv)" \
	--silent \
	--axismap -Y1=Y1,-Y2=Y2 \
	--buttonmap tl^toggle=tl \
	--buttonmap tr^toggle=tr \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \
	--evdev-keymap BTN_THUMB2=a,BTN_THUMB=b,BTN_TOP=x,BTN_TRIGGER=y,BTN_BASE3=back,BTN_BASE4=start,BTN_TOP2=lb,BTN_PINKIE=rb,BTN_BASE5=tl,BTN_BASE6=tr,BTN_BASE=lt,BTN_BASE2=rt \
	--ui-axismap X1=KEY_LEFT:KEY_RIGHT,Y1=KEY_UP:KEY_DOWN \
	--ui-axismap X2=KEY_1:KEY_2,Y2=KEY_3:KEY_Q,lt+X2=KEY_W:KEY_E,lt+Y2=KEY_A:KEY_S,rt+X2=KEY_D:KEY_X,rt+Y2=KEY_Z:KEY_C \
	--ui-buttonmap a=KEY_LEFTBRACE,b=KEY_B,x=KEY_RIGHTBRACE,y=KEY_Y,lt=KEY_UNKNOWN,rt=KEY_UNKNOWN,tl=KEY_UNKNOWN,tr=KEY_UNKNOWN,du=KEY_UP,dd=KEY_DOWN,dl=KEY_LEFT,dr=KEY_RIGHT,start=KEY_T,back^delay:325=KEY_U \
	--ui-buttonmap lb=cycle-key:KEY_GRAVE:KEY_R,rb=cycle-key:KEY_5:KEY_6 \
	--ui-axismap tl+x1=REL_X:15,tl+y1=REL_Y:15 \
	--ui-buttonmap tr+b=BTN_LEFT,tr+a=BTN_RIGHT \
	--ui-buttonmap back+start=KEY_ESC,back+x=KEY_TAB,back+lb=KEY_F11,back+rb=KEY_F9,back+dr=KEY_F10,back+b=KEY_LEFTCTRL+KEY_R,back+a=KEY_PAUSE \
	--ui-buttonmap back+y=exec:/opt/retropie/configs/all/xboxdrv/script-functions/shared/raspi2png.sh \
	--ui-buttonmap lt+rt=exec:/opt/retropie/configs/all/xboxdrv/script-functions/emulators/stella/4waystrict.sh \
	--ui-buttonmap rt+a=KEY_ENTER,rt+b=KEY_ESC,rt+du=KEY_UP,rt+dd=KEY_DOWN,rt+dl=KEY_LEFT,rt+dr=KEY_RIGHT,rt+y=KEY_LEFTSHIFT+KEY_TAB,rt+x=KEY_TAB,rt+lb=KEY_LEFTSHIFT+KEY_LEFT,rt+rb=KEY_LEFTSHIFT+KEY_RIGHT \
	--ui-buttonmap guide=void \
	&

4waystrict.sh called from initial map by pressing 'LT+RT':

#!/bin/bash

sudo killall xboxdrv
sleep 1
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--evdev /dev/input/by-path/platform-3f980000.usb-usb-0:1.2:1.0-event-joystick \
	--detach-kernel-driver \
	--force-feedback \
	--dpad-as-button \
	--trigger-as-button \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--device-name "Logitech Rumblepad 2 (xboxdrv)" \
	--silent \
	--four-way-restrictor \
	--axismap -Y1=Y1,-Y2=Y2 \
	--buttonmap tl^toggle=tl \
	--buttonmap tr^toggle=tr \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_Z=x2,ABS_RZ=y2,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \
	--evdev-keymap BTN_THUMB2=a,BTN_THUMB=b,BTN_TOP=x,BTN_TRIGGER=y,BTN_BASE3=back,BTN_BASE4=start,BTN_TOP2=lb,BTN_PINKIE=rb,BTN_BASE5=tl,BTN_BASE6=tr,BTN_BASE=lt,BTN_BASE2=rt \
	--ui-axismap X1=KEY_LEFT:KEY_RIGHT,Y1=KEY_UP:KEY_DOWN \
	--ui-axismap X2=KEY_1:KEY_2,Y2=KEY_3:KEY_Q,lt+X2=KEY_W:KEY_E,lt+Y2=KEY_A:KEY_S,rt+X2=KEY_D:KEY_X,rt+Y2=KEY_Z:KEY_C \
	--ui-buttonmap a=KEY_LEFTBRACE,b=KEY_B,x=KEY_RIGHTBRACE,y=KEY_Y,lt=KEY_UNKNOWN,rt=KEY_UNKNOWN,tl=KEY_UNKNOWN,tr=KEY_UNKNOWN,du=KEY_UP,dd=KEY_DOWN,dl=KEY_LEFT,dr=KEY_RIGHT,start=KEY_T,back^delay:325=KEY_U \
	--ui-buttonmap lb=cycle-key:KEY_GRAVE:KEY_R,rb=cycle-key:KEY_5:KEY_6 \
	--ui-axismap tl+x1=REL_X:15,tl+y1=REL_Y:15 \
	--ui-buttonmap tr+b=BTN_LEFT,tr+a=BTN_RIGHT \
	--ui-buttonmap back+start=KEY_ESC,back+x=KEY_TAB,back+lb=KEY_F11,back+rb=KEY_F9,back+dr=KEY_F10,back+b=KEY_LEFTCTRL+KEY_R,back+a=KEY_PAUSE \
	--ui-buttonmap back+y=exec:/opt/retropie/configs/all/xboxdrv/script-functions/shared/raspi2png.sh \
	--ui-buttonmap lt+rt=exec:/opt/retropie/configs/all/xboxdrv/script-functions/emulators/stella/default.sh \
	--ui-buttonmap rt+a=KEY_ENTER,rt+b=KEY_ESC,rt+du=KEY_UP,rt+dd=KEY_DOWN,rt+dl=KEY_LEFT,rt+dr=KEY_RIGHT,rt+y=KEY_LEFTSHIFT+KEY_TAB,rt+x=KEY_TAB,rt+lb=KEY_LEFTSHIFT+KEY_LEFT,rt+rb=KEY_LEFTSHIFT+KEY_RIGHT \
	--ui-buttonmap guide=void \
	&

Notice that the default map can then be called back in 4-way restricted, completing the toggle. The only actual difference between the two maps is the addition of --four-way-restrictor and calling the alternate script.

javisousa20

Hello, first of all, thank you very much for the work you do in this forum. I've been here a short time and there are always doubts that I can solve thanks to you. I'm new and I still have a lot to learn. I have a Rpi3 with the last versión of retropie.
I would like to ask you about a problem with a controller that I currently have. Recently I bought this keyboard:
0_1523118432741_61cBQMBrTpL.SL1001.jpg
https://www.amazon.com/dp/B077MDCSFQ/ref=twister_B07BSBJCBY?_encoding=UTF8&psc=1
As you can see, it has two buttons like LR but they are not part of the key map of the keyboard (event0), but of the mouse (event1), as well as the reproduction and volume buttons, and retropie and retroarch can't read it.
Looking for a long time I found xboxdrv and I think it is the only solution that can help me.
My goal is to be able to use the LR buttons and the playback buttons as if they were part of an xbox360 controller, and to configure the keymap of emulators SNES or PS together with the keyboard. Also maybe be able to use the touchpad as a joystick. The L and R keys of the keyboard are working like left and right click of the mouse.
I have found questions and answers about joypad as a mouse, but not the other way around. I have tried to configure following the guide but I have not managed to make it work.
I would like to get some help or experience, a way or a guide, to be able to get it. I can show you the logs or events if necesary. Thank you very much, and sorry if I can´t explain myself as well as you do, I still don't know about programming this tool.