32x Games Will not Boot on a RPi 4 B with the latest RetroPie img

[DeepNote]

Hello everyone, good day to all.

I've been trying to get my .x32 games to boot so that I could play them, titles are the following "Blackthorne, BC Racers". This is my following setup:

Pi Model or other hardware: RPi 4 B (purchased the Vilros Kit)
Power Supply used: USB-C - 5.1V3A Compatible Power Supply w/ On/Off Switch
RetroPie Version Latest
provide the filename of any image used) = retropie-buster-4.7.1-rpi4_400.img.gz
USB Devices connected: XBOX 360 controller
Controller used:XBOX 360 controller
Error messages received: none
Verbose log (if relevant): none
Guide used: (Mention if you followed a guide) These were the guides I used to help with the issue:
Sega32x Docs
Other guide
Other guide
Other Guide

Emulator: lr_picodrive (this is the only core available out of stock)
How to replicate the problem: try running x32 games (game files are type 32x)

The issue is as follows:

After placing the games into the /roms directory, rebooting, scrapping. I tried running a game (Blackthorne) Which follows to the selection of a core (lr_picodrive)

It attempts to boot but then the screen goes dark. Nothing happens after that.

I leave the game and try another, same thing.

I look in the "runcommand.log" for potential clues as to whats happening this is what is inside it:

I've read that bios were needed so I used the bios as specified in the docs/Sega-32x link above.

This did not fix the problem.

I then tried to force the games to be used with the lr-genesis-plus-gx, but this also did not work.

At this point I do not know what else I can try.

If anyone has tips or instruction on how to get them working. Please help.

Any help would be greatly appreciated.

[mitu]

Get a verbose log from lr-picodrie - see here how to enable it during startup - and post the log file contents on pastebin.com.