Trouble with mausberry script
-
Using a mausberry on raspberry pi 3b+ and the original NES switch and the script does not seem to be working. I run the script following the instruction on their setup page and reboot and the switch does not work. By does not work I mean, it appears to be working when I initially power on (LED comes on and Pi comes on) but if you press the power button off the LED goes off but the Pi stays on and does nothing. Pressing the reset button at anytime turns the pi off without using a shutdown script (hard shutdown as if the power cable was pulled). It seem like the pi isn't recognizing the script. I have it wired up per the diagram on the mausberry site (https://mausberry-circuits.myshopify.com/pages/soldering-your-own-switch) this is frustrating the hell out of me. Last piece to my puzzle.
-
Cool Cool
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.