Updated to RP 4.7 and now my A1up volume slider won't mute.
-
I wired my A1up gen1 3 position switch to my Pi and never had a problem until I upgraded to RP 4.7, I ran my scripts again and the power switch is working as it should, but the volume switch won't mute, it's either quiet, loud, or very loud.
I'm not sure how to fix this? Thanks
Pi Model or other hardware: 3B+
Power Supply used: USB power from 12v to 5v converter board from 12v 5.3a brick
RetroPie Version Used : 4.7
Built From: Pre made SD Image on RetroPie website
USB Devices connected: 2x Dragonrise USB Encoders
Controller used: none
Error messages received: None
File: I run this script with previous versions of RP (my volume switch wiring goes to pins 14 red, 16 white, 18 blue).bash <(curl -s https://raw.githubusercontent.com/orlandovald/arcade1up/master/setup.sh)
-
Please add more info about your setup, as detailed in https://retropie.org.uk/forum/topic/3/read-this-first.
-
@mitu said in Updated to RP 4.7 and now my A1up volume slider won't mute.:
Please add more info about your setup, as detailed in https://retropie.org.uk/forum/topic/3/read-this-first.
Done, thank you.
-
@drifty If your issue is with the audio switch from https://raw.githubusercontent.com/orlandovald/arcade1up/master/setup.sh, then you should direct the question to its author(s).
Otherwise, if the issue is with EmulationStation's volume control, then take a look at this topic and see if it makes a difference.
-
@mitu Yep, been through all that already, I don't know what the deal is. I will take your advice and ask the author if he knows about it not working with 4.7.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.