Gamepad 1 Not Responding After Game Start
-
Thanks in advance, as I'm a noob to this, building my first arcade cabinet. I had everything working correctly in a test, but when I installed into my cabinet that I built, having some issues.
I went through emulation station and removed all controllers, then added my player one (1 joystick & 9 buttons) and player two (1 joystick & 9 buttons).
They work fine in the menus, but when I start a game, the "second" joystick and buttons are the ones that act as player 1.
I'm using a powered USB hub, and when I switched the USB cables, it actually solved the issue.
But trying to figure out why that solved it and what I was doing wrong?
-
F FiberArch referenced this topic on
-
@FiberArch if you’re using a pi, retropie gives retroarch each usb port a priority. If using a hub, just trying different configs is the only way to find out what the priority on the hub, as you have just found out.
-
@lostless - Thanks!
Didn't realize that each USB port would have a priority, I thought it was assigned from Emulation Station. Moved the USB cords around, and now I'm back up and running.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.