where should i put the chd files on mame 2003 plus?

ciaolo

where should i put the chd files on mame 2003 plus? I tried putting them in the arcade folder but the games doesn't start.
I give you my runcommand.log

[libretro INFO] [MAME 2003+] Opening ROM file: area51mx.3h
[libretro INFO] [MAME 2003+] read_rom_data: All done
[libretro INFO] [MAME 2003+] Opening ROM file: area51mx.3p
[libretro INFO] [MAME 2003+] read_rom_data: All done
[libretro INFO] [MAME 2003+] Opening ROM file: area51mx.3m
[libretro INFO] [MAME 2003+] read_rom_data: All done
[libretro INFO] [MAME 2003+] Opening ROM file: area51mx.3k
[libretro INFO] [MAME 2003+] read_rom_data: All done
[libretro INFO] [MAME 2003+] Opening disk image: area51mx.chd
[libretro ERROR] [MAME 2003+] area51mx.chd NOT FOUND
[INFO] [Environ]: SET_MESSAGE: Required files are missing, the game cannot be run.

Retro Arcade Fan

@ciaolo It's always in the same folder as the chd file. For example, game.chd should be in arcade/game folder. That being said, you still need the "game.zip" file in the arcade folder as well.

ciaolo

@Retro-Arcade-Fan I tried and it doesn't work

Retro Arcade Fan

@ciaolo I'm not near my arcade at the moment. But Roslof's list suggests lr-mame for area51mx. Line 2350.

https://docs.google.com/spreadsheets/d/1Rq4shU1RUSdcc7cTVWeORMD-mcO6BwXwQ7TGw8f5_zw/edit#gid=719288197

You have to make sure the rom you have is specifically for 2003+. But you should have a folder called /arcade/area51mx and the area51mx.chd file should be inside. Then you should have a file called area51mx.zip in the /arcade folder.

Also, https://www.sindenwiki.org/wiki/Barebones_Compatibility#Playable_2 shows compatibility with Mame 2003+. But a different rom and .chd file.

ciaolo

@Retro-Arcade-Fan yes, my roms are for mame2003+. I downloaded a romset with all 4850 supported games. My area51mx.zip is in the /arcade folder and area51mx.chd is in the /arcade/area51mx folder. Using lr-mame it is the same.

mitu

@ciaolo Linux filesystems are case sensitive, so make sure the files are not in mixed or upper case, they should be named exactly as the log file indicates. You should post the entire runcommand.log on pastebin.com, not just a fragment.

Retro Arcade Fan

@ciaolo Very strange. That's all I can think of. Sorry I can't be of more help. I'll have to check my setup later and get back. Hopefully someone else will chime in.

ciaolo

@Retro-Arcade-Fan thank you a lot

ciaolo

@mitu https://pastebin.com/gh8LeKTn
here you are

mitu

Check the .chd file's hash - if it's not the correct file you'd get the same 'not found' message from the emulator. Verify the checksum for arcade/area51mx/area51mx.chd against the source.

ciaolo

@mitu it isn't the same. Why? I downloaded a romset

Retro Arcade Fan

@ciaolo May not have been from a good source. Or wasn't put together correctly. Unfortunately, it's against forum rules to ask for roms so nobody can tell you anything else as far as that goes.

ciaolo

@Retro-Arcade-Fan I downloaded lot of different area51mx.chd files. They all have different md5

ciaolo

@mitu I checked again and the sha1 is correct. I was using the wrong software for verify.

mitu

@ciaolo Then I don't understand why it's not working. The location - as indicated so far - is correct.
Are you sure the permissions are ok on the file ? Can you run - from the command line -

ls -l $HOME/RetroPie/roms/arcade/area51*

and post the output ?

ciaolo

@mitu This is the output:

/home/pi/RetroPie/roms/arcade/area51:
total 530044
-rw-r--r-- 1 pi pi 5427557759 Feb 29 202 area51.chd

/home/pi/RetroPie/roms/arcade/area51mx:
total 1735572
-rw-r--r-- 1 pi pi 1777220045 Feb 29 2020 area51mx.chd

mitu

Sorry, but I don't know what the issue might be. I can start the game fine with the following files:

ls -l $HOME/RetroPie/roms/arcade/area51*
-rw-r--r-- 1 pi pi 306827 May 15 17:04 /home/pi/RetroPie/roms/arcade/area51mx.zip

/home/pi/RetroPie/roms/arcade/area51mx:
total 1735572
-rw-r--r-- 1 pi pi 1777220045 May 18 15:47 area51mx.chd

I haven't run a checksum on the .chd, but the size matches up your listing. Curiously, your listing doesn't show the .zip ROMset file, but your initial log file did list it.

The only differences I see - comparing the debug logs - is that I don't have either a core override or a content folder override for the core. You may try to rename those to see if they have an impact.

...
[INFO] [Environ]: GET_LED_INTERFACE.
[INFO] [Environ]: SET_CONTROLLER_INFO.
[libretro INFO] [MAME 2003+] Opening ROM file: area51mx.3h
[libretro INFO] [MAME 2003+] read_rom_data: All done
[libretro INFO] [MAME 2003+] Opening ROM file: area51mx.3p
[libretro INFO] [MAME 2003+] read_rom_data: All done
[libretro INFO] [MAME 2003+] Opening ROM file: area51mx.3m
[libretro INFO] [MAME 2003+] read_rom_data: All done
[libretro INFO] [MAME 2003+] Opening ROM file: area51mx.3k
[libretro INFO] [MAME 2003+] read_rom_data: All done
[libretro INFO] [MAME 2003+] Opening disk image: area51mx.chd
[libretro INFO] [MAME 2003+] Opening differencing image: area51mx.dif
[libretro INFO] [MAME 2003+] Creating differencing image: area51mx.dif
[libretro INFO] [MAME 2003+] Opening new differencing image: area51mx.dif
[libretro INFO] [MAME 2003+] Succesfully loaded ROMs.
[INFO] [Environ]: SET_ROTATION: 0
[libretro INFO] [MAME 2003+] RetroArch will perform the rotation.
...
...

ciaolo

@mitu i tried with calspeed and it says "unsupported chd version"

mitu

@ciaolo That means you're using a .chd produced by a later version of MAME's chdman, which is not supported by Mame2003-Plus. You'll need a .chd compatible with Mame2003-plus, just like the rest of the files (zip romsets) used by the emulator.

ciaolo

@mitu yes, thank you. I finally found a good romset.