Sinden lightgun ActionMax Raspberry Pi 4
-
Hi guys, i have a problem with the ActionMax emulator and Raspberry Pi 4. practically the lightgun pointer doesn't seem to work, the trigger and the directional arrows of the Sinden work which make the crosshair appear, but if I move the lightgun nothing happens and obviously the crosshair disappears. Guys can someone help me thanks.
Sorry for writing but I use a translator. -
@Ataru22 Have you looked at the Sinden BareBones configuration? (BB9.1) This was immensely helpful for me when troubleshooting.
Sounds to me like the driver is not loaded. If you start the driver with recoil, this is the easiest way (i found) to see if the driver is loading and working. If it is working, then you have a different problem. -
@hopwon Hi, I solved it was a usb hub problem. Apparently it didn't work well with two devices connected, I left only the Sinden connected and now it magically works.
-
@Ataru22 Yep, the gun(s) play like to be in the lowest number USB Ports on the PI, its easier to configure that way. I have two guns plugged in like that and have a USB hub for all the stuff, after those and it all works fine.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.