Suggestions for ports #3 - Pi5 edition

DTEAM

@RapidEdwin08 said in Suggestions for ports #3 - Pi5 edition:

You can also try an Alternative Retropie-Setup script module from here: aethersx2.sh

Thanks, much appreciated. I tried, but same result. I tested all BIOS versions on the net and nothing happened. Could this be related to the SDL2 version? I will continue to investigate?

Here's my config.txt

RapidEdwin08

@DTEAM someone correct me if I'm wrong but, looking at your config txt,
I think everything you put in #New, including kernel8, is not being applied because you put it all under [cm4].
You should move it up to before [cm4].

ExarKunIv

@RapidEdwin08 said in Suggestions for ports #3 - Pi5 edition:

You should move it up to before [cm4].

you might have something there

i put all my changes after [all]
but before would probably do the same thing

DTEAM

@RapidEdwin08 @ExarKunIv said in Suggestions for ports #3 - Pi5 edition:

i put all my changes after [all]
but before would probably do the same thing

It was that !!!!!!!!!!!!!!!! thanks!

ExarKunIv

@DTEAM it always the simplest things, lol
im glad you got it all sorted out.

DTEAM

@ExarKunIv

For your script, if a controller is not listed in the SDL database, you can use this procedure to add it by replacing this

sudo bash -c 'cat ./out.txt >> /opt/retropie/emulators/ppsspp/assets/gamecontrollerdb.txt'

By this

sudo bash -c 'cat /home/pi/RetroPie-Setup/tmp/build/out.txt >> /opt/retropie/emulators/aethersx2/AetherSX2-v1.5-3606/usr/bin/resources/game_controller_db.txt'

It works, like with PPSSPP

NEW edit: Touch screen (on Pi5) also works well with this emulator

DTEAM

@ExarKunlv

Hi, why citra or lr-citra only work on a x86 platform?

ExarKunIv

@DTEAM i never changed it since there is no point, \ it does not work. since the yuzu shutdown. the main files that the LR core builds from are gone, and even through people have repos with the new locations.

it still does not work. there is LIME that does compile and works. i just have not made a script for it yet

DTEAM

@ExarKunIv
Is Citra Nightly the same emulator?

ExarKunIv

@DTEAM yes and no.
That's going to be the standalone emulator. Not a LR core.
It might work. Might not. I have not bothered to try I'm going to go more for lime since it's got more of an active development going on. And most likely less chance from being shut down.

But hey who says we can't have more then 1 right.

I say give it a shot if you know how

Here is my issue page on GitHub. That has a few things.

If you like give it a shot

https://github.com/Exarkuniv/RetroPie-Extra/issues/193

I'll take any help

retropieuser555

@ExarKunIv it might be worth avoiding anything switch or 3ds related at the moment given the position Ninty have taken as of late? I'd keep a backup of your git respiratory in case they send a takedown notice so you could in theory redo it without the Nintendo related aspects

ExarKunIv

@retropieuser555 im not worried about it. all they can do it kill where the files come from, thats it.
since im not hosting anything. it will just stop the script from doing anything, like it is right now.

DTEAM

@ExarKunIv

To play PS2 games like God of War II at fullspeed on Pi5 with Aethersx2, you must set EE Cycle Skipping at Maximum Underclock (major impact) and Disable Cheats. Affinity Control Mode is set on Performance Cores. I don't see major changes with the last two settings.

I also overclocked my Pi5 . Don't know if it has a positive impact.

ExarKunIv

@DTEAM good to know, thanks for figuring it out

DTEAM

@ExarKunIv

Another thing with Aethersx2 and Pi5. Some games don't allow the possibility to change the language inside the game (Like God of War I). To do that and change the default language, you must set the system/ Bios itself and follow these steps.

1- add this command line in emulators.cfg

aethersx2-editor = "XINIT-WMC:/opt/retropie/emulators/aethersx2/AetherSX2-v1.5-3606/usr/bin/aethersx2"

2- Run this new command line by choosing a game.
3 - In the new GUI, go at the top left and select system -->Start Bios
4- Go in the Console setting and choose your default language (ex.: French)
5- Click start+select to go back in the GUI and choose exit in the system menu
6- restart the game with the good command line (aethersx2)

Now your game will be in the preferred language (like French or German or ....)

ExarKunIv

@DTEAM sounds good. I'll add that to the script

DTEAM

@DTEAM said in Suggestions for ports #3 - Pi5 edition:

@ExarKunIv

To play PS2 games like God of War II at fullspeed on Pi5 with Aethersx2, you must set EE Cycle Skipping at Maximum Underclock (major impact) and Disable Cheats. Affinity Control Mode is set on Performance Cores. I don't see major changes with the last two settings.

I also overclocked my Pi5 . Don't know if it has a positive impact.

I forgot to say something. With that setup, the Enable Speed Limiter menu option must be activated. For the sound quality, you can play with the interpolation mode. Nearest is faster but worst quality. If your sound still choppy, you can use that one

TPR

@sugarfree Is there a current walkthrough on how to get AetherSX2 installed on the Pi 5 or an updated scriptmodule? I'm about to do this myself on my build.

ExarKunIv

@TPR you install it from my GitHub collection RetroPie extras

When you go to my get home file the instructions and install it

From there you can select which of the script modules to put into retropie setup if you want them all you can do them all if yours only certain ones you want then you can pick and choose those

From there you install it like anything else

Do not edit the config file

All you do is find a good bias file the ones I've had working or posted above I believe place it into the BIOS / PS2 folder

Make sure you have the kernel8 edit done in your config.txt

And That's about it

TPR

@TPR Oh awesome. I was just looking at that repository the other day for something else, didn't even notice the PS2 core was in there. That's great though! I'll give it a try tomorrow. Thank you!