Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first
Wireless Xbox controller and keyboard not working after updating to 4.0
-
@BuZz Just can't get the 2nd wireless xbox Joypad to work, on the input screen it detects 2 gamepads, but when I press and hold a button nothing happens. I'm using the official Microsoft wireless adaptor and controllers. It was fine on 3.7 too.
Any suggestions would be most appreciated.
-
@Dominus said in Wireless Xbox controller and keyboard not working after updating to 4.0:
I edited es_settings.cfg and changed it back to carbon and that seems to have fixed the error. But not sure why? Sometimes I had the white screen of death and other it would show the controller option, but no input would work not even the keyboard.
When ES runs out of GPU memory, it can crash in many ways - the white screen is just the most common.
-
@g0nz0uk said in Wireless Xbox controller and keyboard not working after updating to 4.0:
Any suggestions would be most appreciated.
what is the output of the following (can paste it in over a SSH connection)
for js in /dev/input/js*; do echo $js; udevadm info $js; done; dkms status; dmesgPlease use pastebin.com (or a similar site) for the output or style it in a code block on the forum.
-
@BuZz I'm not sure how to use pastbin to be honest, let me try '''
This time no controllers work when I boot up today
pi@retropie:~ $ for js in /dev/input/js*; do echo $js; udevadm info $js; done; dkms status; dmesg; dkms status /dev/input/js4 P: /devices/virtual/input/input6/js4 N: input/js4 E: DEVNAME=/dev/input/js4 E: DEVPATH=/devices/virtual/input/input6/js4 E: ID_INPUT=1 E: ID_INPUT_JOYSTICK=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=4 E: SUBSYSTEM=input E: TAGS=:seat:uaccess: E: USEC_INITIALIZED=321311 /dev/input/js5 P: /devices/virtual/input/input7/js5 N: input/js5 E: DEVNAME=/dev/input/js5 E: DEVPATH=/devices/virtual/input/input7/js5 E: ID_INPUT=1 E: ID_INPUT_JOYSTICK=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=5 E: SUBSYSTEM=input E: TAGS=:seat:uaccess: E: USEC_INITIALIZED=327974 -bash: dkms: command not found [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.13-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #894 SMP Mon Jun 13 13:13:27 BST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] cma: Reserved 8 MiB at 0x2e400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 192512 [ 0.000000] free_area_init_node: node 0, pgdat 808c0e00, node_mem_map add64000 [ 0.000000] Normal zone: 1692 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 192512 pages, LIFO batch:31 [ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] PERCPU: Embedded 13 pages/cpu @aefab000 s22592 r8192 d22464 u53248 [ 0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190820 [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa01041 bcm2709.serial=0x68a4212c smsc95xx.macaddr=B8:27:EB:A4:21:2C bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 744208K/770048K available (6344K kernel code, 432K rwdata, 1712K rodata, 476K init, 764K bss, 17648K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xaf800000 - 0xff800000 (1280 MB) lowmem : 0x80000000 - 0xaf000000 ( 752 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x807e6470 (8058 kB) .init : 0x807e7000 - 0x8085e000 ( 476 kB) .data : 0x8085e000 - 0x808ca108 ( 433 kB) .bss : 0x808cd000 - 0x8098c1ac ( 765 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000031] Switching to timer-based delay loop, resolution 52ns [ 0.000346] Console: colour dummy device 80x30 [ 0.001525] console [tty1] enabled [ 0.001578] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001656] pid_max: default: 32768 minimum: 301 [ 0.002073] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002123] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003358] Disabling cpuset control group subsystem [ 0.003441] Initializing cgroup subsys io [ 0.003502] Initializing cgroup subsys memory [ 0.003582] Initializing cgroup subsys devices [ 0.003635] Initializing cgroup subsys freezer [ 0.003684] Initializing cgroup subsys net_cls [ 0.003782] CPU: Testing write buffer coherency: ok [ 0.003894] ftrace: allocating 21209 entries in 63 pages [ 0.056340] CPU0: update cpu_capacity 1024 [ 0.056419] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.056458] [bcm2709_smp_prepare_cpus] enter [ 0.056613] Setting up static identity map for 0x8240 - 0x8274 [ 0.059015] [bcm2709_boot_secondary] cpu:1 started (0) 17 [ 0.059447] [bcm2709_secondary_init] enter cpu:1 [ 0.059507] CPU1: update cpu_capacity 1024 [ 0.059515] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.060080] [bcm2709_boot_secondary] cpu:2 started (0) 18 [ 0.060437] [bcm2709_secondary_init] enter cpu:2 [ 0.060470] CPU2: update cpu_capacity 1024 [ 0.060478] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.061021] [bcm2709_boot_secondary] cpu:3 started (0) 17 [ 0.061276] [bcm2709_secondary_init] enter cpu:3 [ 0.061305] CPU3: update cpu_capacity 1024 [ 0.061313] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.061399] Brought up 4 CPUs [ 0.061510] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.061543] CPU: All CPU(s) started in HYP mode. [ 0.061572] CPU: Virtualization extensions available. [ 0.062502] devtmpfs: initialized [ 0.074960] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.075467] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.076552] pinctrl core: initialized pinctrl subsystem [ 0.077374] NET: Registered protocol family 16 [ 0.083220] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.091592] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.091656] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.091884] Serial: AMBA PL011 UART driver [ 0.092229] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 0.595195] console [ttyAMA0] enabled [ 0.599497] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.678838] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1 [ 0.687556] SCSI subsystem initialized [ 0.691545] usbcore: registered new interface driver usbfs [ 0.697186] usbcore: registered new interface driver hub [ 0.702675] usbcore: registered new device driver usb [ 0.717846] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-06-20 18:13 [ 0.753647] clocksource: Switched to clocksource arch_sys_counter [ 0.812780] FS-Cache: Loaded [ 0.816127] CacheFiles: Loaded [ 0.835607] NET: Registered protocol family 2 [ 0.841215] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.848483] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.855150] TCP: Hash tables configured (established 8192 bind 8192) [ 0.861668] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.867688] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.874409] NET: Registered protocol family 1 [ 0.879255] RPC: Registered named UNIX socket transport module. [ 0.885244] RPC: Registered udp transport module. [ 0.889964] RPC: Registered tcp transport module. [ 0.894701] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.902569] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.912471] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.934700] VFS: Disk quotas dquot_6.6.0 [ 0.939020] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.948854] FS-Cache: Netfs 'nfs' registered for caching [ 0.955389] NFS: Registering the id_resolver key type [ 0.960515] Key type id_resolver registered [ 0.964748] Key type id_legacy registered [ 0.971949] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.979616] io scheduler noop registered [ 0.983570] io scheduler deadline registered (default) [ 0.988819] io scheduler cfq registered [ 0.995671] BCM2708FB: allocated DMA memory ee800000 [ 1.000691] BCM2708FB: allocated DMA channel 0 @ f3007000 [ 1.039948] Console: switching to colour frame buffer device 240x67 [ 1.957905] bcm2835-rng 3f104000.rng: hwrng registered [ 1.963322] vc-cma: Videocore CMA driver [ 1.967375] vc-cma: vc_cma_base = 0x00000000 [ 1.972167] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 1.977684] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 1.983517] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 2.013103] brd: module loaded [ 2.027701] loop: module loaded [ 2.032116] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0 [ 2.040997] Loading iSCSI transport class v2.0-870. [ 2.046936] usbcore: registered new interface driver smsc95xx [ 2.052871] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.259134] Core Release: 2.80a [ 2.262353] Setting default values for core params [ 2.267284] Finished setting default values for core params [ 2.473393] Using Buffer DMA mode [ 2.476810] Periodic Transfer Interrupt Enhancement - disabled [ 2.482741] Multiprocessor Interrupt Enhancement - disabled [ 2.488431] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 2.492868] Dedicated Tx FIFOs mode [ 2.496889] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae814000 dma = 0xee814000 len=9024 [ 2.506946] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 2.529654] dwc_otg: Microframe scheduler enabled [ 2.529738] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80446a60 [ 2.535765] WARN::hcd_init_fiq:414: FIQ ASM at 0x80446dd0 length 36 [ 2.542140] WARN::hcd_init_fiq:439: MPHI regs_base at 0xaf87e000 [ 2.548320] dwc_otg 3f980000.usb: DWC OTG Controller [ 2.553414] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 2.560914] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 2.571916] Init: Port Power? op_state=1 [ 2.581185] Init: Power Port (0) [ 2.590020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.602192] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.614770] usb usb1: Product: DWC OTG Controller [ 2.624783] usb usb1: Manufacturer: Linux 4.4.13-v7+ dwc_otg_hcd [ 2.636110] usb usb1: SerialNumber: 3f980000.usb [ 2.647074] hub 1-0:1.0: USB hub found [ 2.656148] hub 1-0:1.0: 1 port detected [ 2.666121] dwc_otg: FIQ enabled [ 2.666135] dwc_otg: NAK holdoff enabled [ 2.666145] dwc_otg: FIQ split-transaction FSM enabled [ 2.666187] Module dwc_common_port init [ 2.666640] usbcore: registered new interface driver usb-storage [ 2.678363] mousedev: PS/2 mouse device common for all mice [ 2.690179] bcm2835-cpufreq: min=600000 max=1000000 [ 2.700790] sdhci: Secure Digital Host Controller Interface driver [ 2.712317] sdhci: Copyright(c) Pierre Ossman [ 2.722361] sdhost: log_buf @ ae813000 (ee813000) [ 2.803693] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 2.834994] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.846660] ledtrig-cpu: registered to indicate activity on CPUs [ 2.858146] hidraw: raw HID events driver (C) Jiri Kosina [ 2.868940] Indeed it is in host mode hprt0 = 00021501 [ 2.894056] usbcore: registered new interface driver usbhid [ 2.904908] usbhid: USB HID core driver [ 2.916181] Initializing XFRM netlink socket [ 2.925949] NET: Registered protocol family 17 [ 2.936030] Key type dns_resolver registered [ 2.946077] Registering SWP/SWPB emulation handler [ 2.949241] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.951150] mmc0: new high speed SDHC card at address 0001 [ 2.952174] mmcblk0: mmc0:0001 00000 29.8 GiB [ 2.956896] mmcblk0: p1 p2 [ 2.998907] registered taskstats version 1 [ 3.008565] vc-sm: Videocore shared memory driver [ 3.018574] [vc_sm_connected_init]: start [ 3.028682] [vc_sm_connected_init]: end - returning 0 [ 3.039453] of_cfs_init [ 3.047293] of_cfs_init: OK [ 3.053707] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.053899] Indeed it is in host mode hprt0 = 00001101 [ 3.091068] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 3.103702] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 3.244047] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.256176] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.269947] hub 1-1:1.0: USB hub found [ 3.279126] hub 1-1:1.0: 5 ports detected [ 3.320357] EXT4-fs (mmcblk0p2): recovery complete [ 3.333253] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.346720] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.359655] devtmpfs: mounted [ 3.368712] Freeing unused kernel memory: 476K (807e7000 - 8085e000) [ 3.563723] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 3.638574] random: systemd urandom read with 59 bits of entropy available [ 3.656347] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 3.674155] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.674167] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.677292] smsc95xx v1.0.4 [ 3.709251] systemd[1]: Detected architecture 'arm'. [ 3.738072] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a4:21:2c [ 3.813716] usb 1-1.3: new high-speed USB device number 4 using dwc_otg [ 3.888968] NET: Registered protocol family 10 [ 3.901464] systemd[1]: Inserted module 'ipv6' [ 3.915023] systemd[1]: Set hostname to <retropie>. [ 3.925393] usb 1-1.3: New USB device found, idVendor=7392, idProduct=7811 [ 3.925406] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.925415] usb 1-1.3: Product: 802.11n WLAN Adapter [ 3.925424] usb 1-1.3: Manufacturer: Realtek [ 3.925433] usb 1-1.3: SerialNumber: 00e04c000001 [ 4.003720] usb 1-1.4: new full-speed USB device number 5 using dwc_otg [ 4.091259] uart-pl011 3f201000.uart: no DMA platform data [ 4.138349] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0719 [ 4.151207] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.164360] usb 1-1.4: Product: Xbox 360 Wireless Receiver for Windows [ 4.176702] usb 1-1.4: Manufacturer: ©Microsoft [ 4.187115] usb 1-1.4: SerialNumber: FE242D50 [ 4.443732] usb 1-1.5: new low-speed USB device number 6 using dwc_otg [ 4.575899] usb 1-1.5: New USB device found, idVendor=0c40, idProduct=8000 [ 4.588755] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.601913] usb 1-1.5: Product: 2.4GHz receiver [ 4.612268] usb 1-1.5: Manufacturer: ELMCU [ 4.638537] input: ELMCU 2.4GHz receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0C40:8000.0001/input/input0 [ 4.677656] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 4.702975] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 4.715154] hid-generic 0003:0C40:8000.0001: input,hidraw0: USB HID v1.11 Keyboard [ELMCU 2.4GHz receiver] on usb-3f980000.usb-1.5/input0 [ 4.734633] input: ELMCU 2.4GHz receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:0C40:8000.0002/input/input1 [ 4.755023] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.769284] systemd[1]: Expecting device dev-ttyAMA0.device... [ 4.784332] hid-generic 0003:0C40:8000.0002: input,hidraw1: USB HID v1.11 Mouse [ELMCU 2.4GHz receiver] on usb-3f980000.usb-1.5/input1 [ 4.808120] systemd[1]: Starting Remote File Systems (Pre). [ 4.828261] systemd[1]: Reached target Remote File Systems (Pre). [ 4.841357] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 4.865605] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.882140] systemd[1]: Starting Encrypted Volumes. [ 4.902144] systemd[1]: Reached target Encrypted Volumes. [ 4.914668] systemd[1]: Starting Swap. [ 4.933353] systemd[1]: Reached target Swap. [ 4.944643] systemd[1]: Expecting device dev-mmcblk0p1.device... [ 4.965532] systemd[1]: Starting Root Slice. [ 4.984906] systemd[1]: Created slice Root Slice. [ 4.996639] systemd[1]: Starting User and Session Slice. [ 5.017065] systemd[1]: Created slice User and Session Slice. [ 5.029786] systemd[1]: Starting Delayed Shutdown Socket. [ 5.050146] systemd[1]: Listening on Delayed Shutdown Socket. [ 5.062731] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 5.083939] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.097679] systemd[1]: Starting Journal Socket (/dev/log). [ 5.117908] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.130581] systemd[1]: Starting udev Control Socket. [ 5.149871] systemd[1]: Listening on udev Control Socket. [ 5.161895] systemd[1]: Starting udev Kernel Socket. [ 5.181005] systemd[1]: Listening on udev Kernel Socket. [ 5.192957] systemd[1]: Starting Journal Socket. [ 5.211740] systemd[1]: Listening on Journal Socket. [ 5.223356] systemd[1]: Starting System Slice. [ 5.242092] systemd[1]: Created slice System Slice. [ 5.253709] systemd[1]: Starting File System Check on Root Device... [ 5.314576] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 5.336412] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.349681] systemd[1]: Starting system-getty.slice. [ 5.370753] systemd[1]: Created slice system-getty.slice. [ 5.382942] systemd[1]: Starting system-serial\x2dgetty.slice. [ 5.403801] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.417035] systemd[1]: Starting Increase datagram queue length... [ 5.474640] systemd[1]: Starting Restore / save the current clock... [ 5.505929] systemd[1]: Mounted Huge Pages File System. [ 5.520819] systemd[1]: Starting Load Kernel Modules... [ 5.543571] systemd[1]: Starting udev Coldplug all Devices... [ 5.576619] systemd[1]: Started Set Up Additional Binary Formats. [ 5.590123] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.616710] systemd[1]: Mounting POSIX Message Queue File System... [ 5.641070] systemd[1]: Mounting Debug File System... [ 5.665167] systemd[1]: Starting LSB: Show custom splashscreen... [ 5.689564] systemd[1]: Starting Slices. [ 5.707278] systemd[1]: Reached target Slices. [ 5.729353] systemd[1]: Mounted Debug File System. [ 5.747561] systemd[1]: Mounted POSIX Message Queue File System. [ 5.768917] systemd[1]: Started File System Check on Root Device. [ 5.808493] systemd[1]: Started Increase datagram queue length. [ 5.829094] systemd[1]: Started Restore / save the current clock. [ 5.850000] systemd[1]: Started Load Kernel Modules. [ 5.924908] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.950649] systemd[1]: Started LSB: Show custom splashscreen. [ 5.969308] systemd[1]: Time has been changed [ 6.001616] systemd[1]: Started udev Coldplug all Devices. [ 6.198933] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.254615] systemd[1]: Mounted FUSE Control File System. [ 6.266615] systemd[1]: Starting Apply Kernel Variables... [ 6.290219] systemd[1]: Mounting Configuration File System... [ 6.314167] systemd[1]: Starting Syslog Socket. [ 6.322684] systemd[1]: Listening on Syslog Socket. [ 6.322941] systemd[1]: Starting Journal Service... [ 6.343843] systemd[1]: Started Journal Service. [ 6.550759] systemd-udevd[142]: starting version 215 [ 6.916575] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 6.917596] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 7.072184] input: Xbox 360 Wireless Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/input/input2 [ 7.074739] input: Xbox 360 Wireless Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/input/input3 [ 7.075919] input: Xbox 360 Wireless Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.4/input/input4 [ 7.076966] input: Xbox 360 Wireless Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.6/input/input5 [ 7.077624] usbcore: registered new interface driver xpad [ 7.358082] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 7.423460] random: nonblocking pool is initialized [ 7.617726] cfg80211: World regulatory domain updated: [ 7.617761] cfg80211: DFS Master region: unset [ 7.617774] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7.617793] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7.617809] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7.617825] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7.617898] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7.617917] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7.617934] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7.618032] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7.618048] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7.623435] usbcore: registered new interface driver rtl8192cu [ 7.938267] systemd-journald[141]: Received request to flush runtime journal from PID 1 [ 8.959677] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.639528] Adding 102396k swap on /var/swap. Priority:-1 extents:2 across:2359296k SSFS [ 10.126909] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 10.127234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.888802] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.916477] cfg80211: Regulatory domain changed to country: GB [ 10.916514] cfg80211: DFS Master region: ETSI [ 10.916526] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 10.916546] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.916565] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 10.916585] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 10.916602] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [ 10.916617] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 11.594249] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.595350] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1 [ 17.543219] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input6 [ 17.544774] input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/input/input7 -bash: dkms: command not found -
Backticks not apostrophes. See http://commonmark.org/help/.
-
You are still using the xboxdrv - not the updated xpad driver as I asked in my first reply. https://retropie.org.uk/forum/post/22112
you need to remove xboxdrv from Manage Packages -> drivers and install the updated xpad driver.
-
@BuZz I did that not sure why it keep returning
This is a fresh 4.0.1 install and both work
pi@retropie:~ $ for js in /dev/input/js*; do echo $js; udevadm info $js; done; dkms status; dmesg; dkms status /dev/input/js0 P: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0079:0006.0001/input/input0/js0 N: input/js0 S: input/by-id/usb-DragonRise_Inc._Generic_USB_Joystick-joystick S: input/by-path/platform-3f980000.usb-usb-0:1.2:1.0-joystick E: DEVLINKS=/dev/input/by-id/usb-DragonRise_Inc._Generic_USB_Joystick-joystick /dev/input/by-path/platform-3f980000.usb-usb-0:1.2:1.0-joystick E: DEVNAME=/dev/input/js0 E: DEVPATH=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0079:0006.0001/input/input0/js0 E: ID_BUS=usb E: ID_FOR_SEAT=input-platform-3f980000_usb-usb-0_1_2_1_0 E: ID_INPUT=1 E: ID_INPUT_JOYSTICK=1 E: ID_MODEL=Generic_USB_Joystick E: ID_MODEL_ENC=Generic\x20\x20\x20USB\x20\x20Joystick\x20\x20 E: ID_MODEL_ID=0006 E: ID_PATH=platform-3f980000.usb-usb-0:1.2:1.0 E: ID_PATH_TAG=platform-3f980000_usb-usb-0_1_2_1_0 E: ID_REVISION=0107 E: ID_SERIAL=DragonRise_Inc._Generic_USB_Joystick E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=DragonRise_Inc. E: ID_VENDOR_ENC=DragonRise\x20Inc.\x20\x20 E: ID_VENDOR_ID=0079 E: MAJOR=13 E: MINOR=0 E: SUBSYSTEM=input E: TAGS=:seat:uaccess: E: USEC_INITIALIZED=26842 /dev/input/js1 P: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0079:0006.0002/input/input1/js1 N: input/js1 S: input/by-id/usb-DragonRise_Inc._Generic_USB_Joystick-joystick S: input/by-path/platform-3f980000.usb-usb-0:1.4:1.0-joystick E: DEVLINKS=/dev/input/by-id/usb-DragonRise_Inc._Generic_USB_Joystick-joystick /dev/input/by-path/platform-3f980000.usb-usb-0:1.4:1.0-joystick E: DEVNAME=/dev/input/js1 E: DEVPATH=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0079:0006.0002/input/input1/js1 E: ID_BUS=usb E: ID_FOR_SEAT=input-platform-3f980000_usb-usb-0_1_4_1_0 E: ID_INPUT=1 E: ID_INPUT_JOYSTICK=1 E: ID_MODEL=Generic_USB_Joystick E: ID_MODEL_ENC=Generic\x20\x20\x20USB\x20\x20Joystick\x20\x20 E: ID_MODEL_ID=0006 E: ID_PATH=platform-3f980000.usb-usb-0:1.4:1.0 E: ID_PATH_TAG=platform-3f980000_usb-usb-0_1_4_1_0 E: ID_REVISION=0107 E: ID_SERIAL=DragonRise_Inc._Generic_USB_Joystick E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=DragonRise_Inc. E: ID_VENDOR_ENC=DragonRise\x20Inc.\x20\x20 E: ID_VENDOR_ID=0079 E: MAJOR=13 E: MINOR=1 E: SUBSYSTEM=input E: TAGS=:seat:uaccess: E: USEC_INITIALIZED=28964 /dev/input/js2 P: /devices/virtual/input/input2/js2 N: input/js2 E: DEVNAME=/dev/input/js2 E: DEVPATH=/devices/virtual/input/input2/js2 E: ID_INPUT=1 E: ID_INPUT_JOYSTICK=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=2 E: SUBSYSTEM=input E: TAGS=:seat:uaccess: E: USEC_INITIALIZED=522398 /dev/input/js3 P: /devices/virtual/input/input3/js3 N: input/js3 E: DEVNAME=/dev/input/js3 E: DEVPATH=/devices/virtual/input/input3/js3 E: ID_INPUT=1 E: ID_INPUT_JOYSTICK=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=3 E: SUBSYSTEM=input E: TAGS=:seat:uaccess: E: USEC_INITIALIZED=523461 -bash: dkms: command not found [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.13-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #894 SMP Mon Jun 13 13:13:27 BST 2016 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] cma: Reserved 8 MiB at 0x2e400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 192512 [ 0.000000] free_area_init_node: node 0, pgdat 808c0e00, node_mem_map add64000 [ 0.000000] Normal zone: 1692 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 192512 pages, LIFO batch:31 [ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] PERCPU: Embedded 13 pages/cpu @aefaa000 s22592 r8192 d22464 u53248 [ 0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190820 [ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2709.boardrev=0xa02082 bcm2709.serial=0x610c0ec9 smsc95xx.macaddr=B8:27:EB:0C:0E:C9 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet loglevel=3 consoleblank=0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 744204K/770048K available (6344K kernel code, 432K rwdata, 1712K rodata, 476K init, 764K bss, 17652K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xaf800000 - 0xff800000 (1280 MB) lowmem : 0x80000000 - 0xaf000000 ( 752 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x807e6470 (8058 kB) .init : 0x807e7000 - 0x8085e000 ( 476 kB) .data : 0x8085e000 - 0x808ca108 ( 433 kB) .bss : 0x808cd000 - 0x8098c1ac ( 765 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000024] Switching to timer-based delay loop, resolution 52ns [ 0.000275] Console: colour dummy device 80x30 [ 0.000474] console [tty1] enabled [ 0.000497] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000516] pid_max: default: 32768 minimum: 301 [ 0.000831] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000845] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001777] Disabling cpuset control group subsystem [ 0.001809] Initializing cgroup subsys io [ 0.001837] Initializing cgroup subsys memory [ 0.001875] Initializing cgroup subsys devices [ 0.001895] Initializing cgroup subsys freezer [ 0.001916] Initializing cgroup subsys net_cls [ 0.001965] CPU: Testing write buffer coherency: ok [ 0.002030] ftrace: allocating 21209 entries in 63 pages [ 0.052435] CPU0: update cpu_capacity 1024 [ 0.052467] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.052479] [bcm2709_smp_prepare_cpus] enter [ 0.052611] Setting up static identity map for 0x8240 - 0x8274 [ 0.054254] [bcm2709_boot_secondary] cpu:1 started (0) 17 [ 0.054614] [bcm2709_secondary_init] enter cpu:1 [ 0.054657] CPU1: update cpu_capacity 1024 [ 0.054664] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.055037] [bcm2709_boot_secondary] cpu:2 started (0) 17 [ 0.055299] [bcm2709_secondary_init] enter cpu:2 [ 0.055320] CPU2: update cpu_capacity 1024 [ 0.055326] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.055683] [bcm2709_boot_secondary] cpu:3 started (0) 17 [ 0.055864] [bcm2709_secondary_init] enter cpu:3 [ 0.055885] CPU3: update cpu_capacity 1024 [ 0.055891] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.055951] Brought up 4 CPUs [ 0.055974] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.055982] CPU: All CPU(s) started in HYP mode. [ 0.055989] CPU: Virtualization extensions available. [ 0.056598] devtmpfs: initialized [ 0.066803] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.067121] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067821] pinctrl core: initialized pinctrl subsystem [ 0.068352] NET: Registered protocol family 16 [ 0.073581] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.080485] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.080496] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.080654] Serial: AMBA PL011 UART driver [ 0.080793] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.080955] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.144566] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1 [ 0.145126] SCSI subsystem initialized [ 0.145302] usbcore: registered new interface driver usbfs [ 0.145389] usbcore: registered new interface driver hub [ 0.145485] usbcore: registered new device driver usb [ 0.151995] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-06-20 18:13 [ 0.179236] clocksource: Switched to clocksource arch_sys_counter [ 0.223990] FS-Cache: Loaded [ 0.224256] CacheFiles: Loaded [ 0.236534] NET: Registered protocol family 2 [ 0.237381] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.237494] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.237683] TCP: Hash tables configured (established 8192 bind 8192) [ 0.237775] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.237821] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.238050] NET: Registered protocol family 1 [ 0.238360] RPC: Registered named UNIX socket transport module. [ 0.238370] RPC: Registered udp transport module. [ 0.238378] RPC: Registered tcp transport module. [ 0.238386] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.239522] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.240819] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.254091] VFS: Disk quotas dquot_6.6.0 [ 0.254402] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.256680] FS-Cache: Netfs 'nfs' registered for caching [ 0.257570] NFS: Registering the id_resolver key type [ 0.257612] Key type id_resolver registered [ 0.257621] Key type id_legacy registered [ 0.259958] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.260089] io scheduler noop registered [ 0.260109] io scheduler deadline registered (default) [ 0.260162] io scheduler cfq registered [ 0.262669] BCM2708FB: allocated DMA memory ee800000 [ 0.262695] BCM2708FB: allocated DMA channel 0 @ f3007000 [ 0.291120] Console: switching to colour frame buffer device 200x75 [ 1.169460] bcm2835-rng 3f104000.rng: hwrng registered [ 1.169645] vc-cma: Videocore CMA driver [ 1.169656] vc-cma: vc_cma_base = 0x00000000 [ 1.169665] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 1.169674] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 1.169963] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 1.184762] brd: module loaded [ 1.193423] loop: module loaded [ 1.194347] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0 [ 1.195805] Loading iSCSI transport class v2.0-870. [ 1.196447] usbcore: registered new interface driver smsc95xx [ 1.196498] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.396733] Core Release: 2.80a [ 1.396747] Setting default values for core params [ 1.396780] Finished setting default values for core params [ 1.597146] Using Buffer DMA mode [ 1.597156] Periodic Transfer Interrupt Enhancement - disabled [ 1.597165] Multiprocessor Interrupt Enhancement - disabled [ 1.597174] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.597188] Dedicated Tx FIFOs mode [ 1.597503] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae814000 dma = 0xee814000 len=9024 [ 1.597534] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 1.597557] dwc_otg: Microframe scheduler enabled [ 1.597602] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80446a60 [ 1.597615] WARN::hcd_init_fiq:414: FIQ ASM at 0x80446dd0 length 36 [ 1.597630] WARN::hcd_init_fiq:439: MPHI regs_base at 0xafc46000 [ 1.597690] dwc_otg 3f980000.usb: DWC OTG Controller [ 1.597726] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 1.597761] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 1.597811] Init: Port Power? op_state=1 [ 1.597819] Init: Power Port (0) [ 1.598020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.598035] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.598048] usb usb1: Product: DWC OTG Controller [ 1.598060] usb usb1: Manufacturer: Linux 4.4.13-v7+ dwc_otg_hcd [ 1.598072] usb usb1: SerialNumber: 3f980000.usb [ 1.598848] hub 1-0:1.0: USB hub found [ 1.598890] hub 1-0:1.0: 1 port detected [ 1.599520] dwc_otg: FIQ enabled [ 1.599530] dwc_otg: NAK holdoff enabled [ 1.599538] dwc_otg: FIQ split-transaction FSM enabled [ 1.599568] Module dwc_common_port init [ 1.599815] usbcore: registered new interface driver usb-storage [ 1.600070] mousedev: PS/2 mouse device common for all mice [ 1.600766] bcm2835-cpufreq: min=600000 max=1350000 [ 1.601067] sdhci: Secure Digital Host Controller Interface driver [ 1.601075] sdhci: Copyright(c) Pierre Ossman [ 1.601371] sdhost: log_buf @ ae813000 (ee813000) [ 1.679265] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 1.681508] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 1.681522] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 1.736092] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.737933] mmc0: new high speed SDXC card at address 0001 [ 1.738518] mmcblk0: mmc0:0001 00000 59.6 GiB [ 1.739366] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.739792] ledtrig-cpu: registered to indicate activity on CPUs [ 1.739908] hidraw: raw HID events driver (C) Jiri Kosina [ 1.740087] usbcore: registered new interface driver usbhid [ 1.740095] usbhid: USB HID core driver [ 1.740634] Initializing XFRM netlink socket [ 1.740668] NET: Registered protocol family 17 [ 1.740798] Key type dns_resolver registered [ 1.741033] mmcblk0: p1 p2 [ 1.741383] Registering SWP/SWPB emulation handler [ 1.742239] registered taskstats version 1 [ 1.742426] vc-sm: Videocore shared memory driver [ 1.742441] [vc_sm_connected_init]: start [ 1.742929] [vc_sm_connected_init]: end - returning 0 [ 1.745130] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 1.745488] of_cfs_init [ 1.745565] of_cfs_init: OK [ 1.752195] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 1.752210] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.758542] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.760098] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.761645] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.764426] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.789374] Indeed it is in host mode hprt0 = 00021501 [ 1.855151] mmc1: new high speed SDIO card at address 0001 [ 1.969269] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.969399] Indeed it is in host mode hprt0 = 00001101 [ 2.169529] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 2.169545] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.170275] hub 1-1:1.0: USB hub found [ 2.170378] hub 1-1:1.0: 5 ports detected [ 2.225371] EXT4-fs (mmcblk0p2): recovery complete [ 2.246538] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.246593] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.247197] devtmpfs: mounted [ 2.247942] Freeing unused kernel memory: 476K (807e7000 - 8085e000) [ 2.449287] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.465713] random: systemd urandom read with 69 bits of entropy available [ 2.549548] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.549570] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.552439] smsc95xx v1.0.4 [ 2.579628] NET: Registered protocol family 10 [ 2.612905] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:0c:0e:c9 [ 2.689341] usb 1-1.2: new low-speed USB device number 4 using dwc_otg [ 2.794744] usb 1-1.2: New USB device found, idVendor=0079, idProduct=0006 [ 2.794767] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.794780] usb 1-1.2: Product: Generic USB Joystick [ 2.794792] usb 1-1.2: Manufacturer: DragonRise Inc. [ 2.879298] usb 1-1.4: new low-speed USB device number 5 using dwc_otg [ 2.985267] usb 1-1.4: New USB device found, idVendor=0079, idProduct=0006 [ 2.985288] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.985301] usb 1-1.4: Product: Generic USB Joystick [ 2.985313] usb 1-1.4: Manufacturer: DragonRise Inc. [ 3.064353] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 3.255981] fuse init (API version 7.23) [ 3.677045] systemd-udevd[145]: starting version 215 [ 3.889054] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 3.893626] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 4.055695] input: DragonRise Inc. Generic USB Joystick as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0079:0006.0001/input/input0 [ 4.056205] dragonrise 0003:0079:0006.0001: input,hidraw0: USB HID v1.10 Joystick [DragonRise Inc. Generic USB Joystick ] on usb-3f980000.usb-1.2/input0 [ 4.057872] input: DragonRise Inc. Generic USB Joystick as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0079:0006.0002/input/input1 [ 4.058318] dragonrise 0003:0079:0006.0002: input,hidraw1: USB HID v1.10 Joystick [DragonRise Inc. Generic USB Joystick ] on usb-3f980000.usb-1.4/input0 [ 4.216513] usbcore: registered new interface driver brcmfmac [ 4.319597] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.360105] random: nonblocking pool is initialized [ 4.391265] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7 [ 4.417745] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 4.477333] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 4.477365] cfg80211: World regulatory domain updated: [ 4.477374] cfg80211: DFS Master region: unset [ 4.477385] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4.477399] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.477411] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.477423] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 4.477439] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 4.477453] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 4.477465] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 4.477477] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 4.477490] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 4.698267] systemd-journald[125]: Received request to flush runtime journal from PID 1 [ 5.019028] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists [ 5.019058] brcmfmac: brcmf_add_if: ignore IF event [ 5.024180] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.024236] brcmfmac: power management disabled [ 6.062064] Adding 102396k swap on /var/swap. Priority:-1 extents:2 across:114688k SSFS [ 6.210704] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 6.210870] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.582120] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6.606731] cfg80211: Regulatory domain changed to country: GB [ 6.606744] cfg80211: DFS Master region: ETSI [ 6.606748] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.606755] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.606762] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6.606768] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6.606774] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [ 6.606779] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 20.550806] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input2 [ 20.552004] input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/input/input3 -bash: dkms: command not found -
You can't have as you still had xboxdrv enabled, and you didn't have
dkmsinstalled which is required/installed by the updated xpad driver. -
I thought you had an xbox wireless controller or do you have some clones ? As they are identified as "DragonRise_Inc._Generic_USB_Joystick-joystick"
-
@BuZz Think I'm being think and actually misread you first post. I have offical Xbox controllers, so I've removed the Xboxdrv drivers and install xpad drivers.
The "DragonRise_Inc._Generic_USB_Joystick-joystick" are off my other system which is a bartop, this SD card was used in that a while back (3.6).
-
I'm confused - you just ran those commands on a working system ? The commands I got you to write show me what is currently connected - and it shows me no XBOX joysticks. Just DragonRise_Inc._Generic_USB_Joystick-joystick - I wanted those commands run on the system with the non working xbox controllers.
-
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.