I-PAC2 PS/2 support
-
Hello, i recently bought a cabinet that had, what appears to be, a very old i-pac ps/2 controller in it. This particular version does not look like the one on the website here:
https://www.ultimarc.com/control-interfaces/i-pacs/i-pac-2-classic-ps-2-versionIt does not look like that. The model in my cabinet has two ps/2 ports on opposite ends. They are labeled PC and KBD.
Question is will retropie support this old ipac controller via a ps/2 to usb controller? And if so would I follow the programming instructions here?
https://www.ultimarc.com/legacy-winipac-documentation
Would i put the ps2 port in KBD or PC?Or would it be best to just buy a new updated ipac?
Thanks!
-
Hello, i recently bought a cabinet that had, what appears to be, a very old i-pac ps/2 controller in it. This particular version does not look like the one on the website here:
https://www.ultimarc.com/control-interfaces/i-pacs/i-pac-2-classic-ps-2-versionThe page above doesn't exist - the site shows an error for a missing page.
It does not look like that. The model in my cabinet has two ps/2 ports on opposite ends. They are labeled PC and KBD.
Question is will retropie support this old ipac controller via a ps/2 to usb controller? And if so would I follow the programming instructions here?
I'm not sure, but if the IPAC identifies as a keyboard and it works without additional drivers, then it should be ok - RetroPie (or Linux rather) can use the keyboard.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.