Pi in a Sega Genesis USB Hub Build
-
@cyperghost Yea that was a problem with the shipping calculator on my site. It's fixed now and it combines everything into one package. You can get as many as you want and it will charge $14.
I'm not sure how I feel about using an envelope. I'll see whether the thickness is allowed.
-
@adamspc The price is really hot ... I know you make them on your own and I appreciate your solid work.
-
@cyperghost or if someone over there wants to purchase a bunch of them maybe I can cover some or all of the shipping cost
-
@cyperghost
Also, here is a soldering guide I put together for the board. It give a pretty good overview of the board's function and capabilities. -
@adamspc Oh I see you will also get some I2S amps :) Are these the Adafruit mono amps? These devices are very rare. Maybe I will buy some from you inkl. the soft on-off via company :)
-
OK so I got my Mausberry /w Spring Header circuit today. Soldered it all up, installed the switch scripts, and it's not working exactly right. Need some help...
So I have my +5 wire going to PP2 and GND going to PP5. I'm also using the same switch as @obsidianspider. So I have my "edge" pin going SW+ and the "center" pin going to SW-. The IN/OUT wires are setup on their default GPIO pins. Everything wired up, plug it in.. nothing. That's good. Flip the switch, power comes on. That's good. On screen, all of a sudden I'm getting a yellow lightning bolt icon in the top right corner. If I jiggle the wires (maybe I'm just imagining the jiggle is what causes this) the red LED on the Pi blinks. As I said, I might be imagining that, it might blink already because of the lightning bolt. So the system is running ok except for that icon. Then I switch off. The Pi seems to "shutdown", but the circuit doesn't completely cut the power. The red LED on the Pi and the HUB remain on. If I switch on again, nothing happens. I checked with my "direct plug" circuit I have in my NES, and when the switch is off, the system is OFF. The red LED on the Pi is out.
Do I have a bad circuit? Or is there something I'm missing?
Who's Scruffy Looking?
-
@hansolo77 What gauge wire are you using for your power wire? Also, if the Pi doesn't totally shut down, then something is wrong, but first I'd address the lightning bolt issue as that means it's not getting enough power, which can cause all sorts of weirdness and possible file system corruption.
-
@hansolo77 pics too PLEASE! Im sure with my luck I'll end up in the same boat. Doing 3 as gift and don't wanna run into issues so some pics of what you have would be GREATLY appreciated
-
I'm not sure of the gauge. I just grabbed 2 wires off of a jumper wire package I ordered, cut off the ends and soldered them. They're probably not thick enough.
https://www.amazon.com/gp/product/B00GSE2S98/
Maybe it's my crappy soldering skills?
Who's Scruffy Looking?
-
When I've used the spring header flavour I ended up removing it and soldering straight to the board, same with the micro usb, just to save space - works great.
-
@jackal123uk How is it attached though? I looked at the backside of the circuit, and it doesn't look like it's mounted to anything.
-
@hansolo77 this may seem odd to you but take the loop out of your wire. Coiling a wire can cause a lot of issues. Wire thickness looks good. I would remove as many pin headers as possible. Loose pin headers can cause voltage loss as well.
-
Ok, so I took the wires off, cleaned up the solder and resoldered.. same old yellow lightning bolt icon. Then I scrounged around for some better, heavier wire. I found some old sh!tty RCA (red/yellow/white) cables that I don't use anymore. Cut off the ends, trimmed it down, removed the yellow wire, stripped, properly tinned, and then soldered THOSE to the Pi and the circuit. By the way, I figured out how to remove the spring terminals, by just unsoldering the +5 and GND points on the bottom of the circuit (had to google up some images). Now that all of that is out of the way.. SUCCESS!!! The yellow lightning bolt is gone. HOWEVER... :( I still can't get it to completely power off. It's like it goes to sleep rather than cut the power. I'll try taking the loop out, although I'm not sure that will do anything at this point.
FIXED IT!!! I went back and double checked my wiring on the GPIO. I don't know if I had the wires reversed, or maybe on the wrong pins.. but I completely disconnected them and re-connected them. Tried it, and it works now! WHEW! Didn't waste any money, and didn't blow anything up lol.
Is there a way to test all the available aspects of the PI, just so I can have a clear mind in knowing that nothing got messed up while soldering? Like a program or something that goes through and tests all the functions and connections to make sure they're still at factory capability? If not.. somebody should make one so people can test their devices after making modifications.
Anyway... EEEE!!! I'm happy. Now all I have to do is cut off the old hub's tension support post and file out a hole for the new power plug. My only disappointment factor in all this is that I scuffed the crap out of the top of my case (seeing as how I'm working from the bottom). At least these weren't that expensive, maybe I'll buy another one and do it right next time. :)
-
@hansolo77 Congratulations! I know this had been weighing on you for quite a while. What I did with mine was test all of the USB ports on the hub, make sure I can get in via SSH, run retropie updates, and then I played the darn thing. Also, I see you reworked your power switch into a different orientation. What did you end up doing with that?
As far as scratching the top of the case, what I tried to do was to have paper down, or a piece of cloth when I was working on things. (Except when soldering, I didn't want a firey mess). That seemed to keep the top in decent shape, though there is one spot that is slightly discolored, not sure if it was always like that or if I did it. I didn't really take a good "before" photo where I would be able to tell.
-
I ended up removing the power switch that it comes with. I just couldn't get the "ordered" switch and the original switch to work right together. So I removed the original switch, and mounted the "ordered" switch in it's place, with the toggle through the hole. Hot glue to mount it. The pins I just sort of bent so they wouldn't cause a clearance issue (probably didn't have to, but it makes me feel better). Mounting the power circuit into the case was a bit of a hassle, since it pretty much levitates in between the 2 halves. What I'm doing to solve that is a bit of a hack job, but it worked. The spring terminal I removed from the Mauseberry circuit is actually pretty darn close height-wise compared to the void left over between the bottom (top) of the case. Last night, I did my best to hot glue the edge of the circuit to the edge of the case, but it wasn't vertically stable. So I hot glued the left-over spring terminal to the case, then hot glued the circuit to the terminal. There's no separating the two now without a razor. But the result is solid, and I can plug in the power cable (with force!) and it doesn't budge. So now my only problem is closing up the case. With the extra thick wires I used for the power, the top (bottom) of the case now won't close right. I'm waiting for some heat sinks, but once I get them and have them installed, I'll probably hot clue the wires down to the back of the Pi. The way they are now, they want to stack on top of each other rather than down flat. Once flat, it looks like there won't be any issues.
-
@hansolo77 Sounds good. Keep us posted!
-
@hansolo77 That's right; it's only the solder to the terminals holding it on. I found that melting the solder with the board upside down was enough for it to quickly and cleanly fall out.
-
Hey everyone, this thread has inspired me to order a Sega Genesis Usb hub and give it a good. I ordered it off shirtpunch for $20 usd the next day I see it on sale for $7.99 :/
As a noob I'm finding it quite difficult to see where each wire needs to go and which parts I need. Can someone please make a guide on which parts exactly are needed and where each wire needs to be soldered on the boards with pictures?
-
@steetsofrage dope ass game by the way. First you wanna be careful prying the hub open. Of the 3 hubs I have they all separated fine with a lil steady pressure. You'll want to pry near the front of the hub where it's being secured by a couple stubs and glue.SOME MAY BREAK, but it should be fine being you will be screwing the two halves together. What pi do you plan on using?What game emulators do you plan to run? Do you plan on the switch powering the unit? Not necessary but deff dope if done correctly.
-
@steetsofrage yeah me and my roommate got lucky and saw the sale so we got 5 extra hubs.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.