DraStic (Nintendo DS emulator) OUT NOW for pi2/3!
-
i am not sure if anyone having the same issue as i did...
i can exit Nintendo DS game... :(
I press select + start , it won't work...
anyone can show me the way to exit the DS game by controller/joystick....?
Thank in advanced... -
@chinjw you need to be able to get into the drastic menu by pressing right on the right analog stick. If you get a black screen then you have the same problem as the rest of us. However if you do have the problem, if you could post your controllers config file on here i could make a working drastic config file for you as i had to edit mine manually.
-
@chalamannn read my last post. I could help you if you need me to.
-
@edmaul69 hi, thanks for you prompt reply,
yup..i can enter the drastic menu... look like is the controller config problem...
i will post my controller setting file here by tomorrow...
by the way, can you tell me the folder path to get this setting file...? :p
much appreciated !! -
@chinjw /opt/retropie/configs/all/retroarch/autoconfig/
Edit. Corrected
-
@edmaul69 this is the controller "PLAYSTATION(R)3 Controller.cfg"
input_device = "PLAYSTATION(R)3 Controller"
input_driver = "udev"
input_r_y_plus_axis = "+3"
input_l3_btn = "1"
input_r_x_minus_axis = "-2"
input_l_btn = "10"
input_load_state_btn = "10"
input_start_btn = "3"
input_exit_emulator_btn = "3"
input_l_y_minus_axis = "-1"
input_up_btn = "4"
input_r_y_minus_axis = "-3"
input_a_btn = "13"
input_b_btn = "14"
input_reset_btn = "14"
input_enable_hotkey_btn = "0"
input_down_btn = "6"
input_l_x_plus_axis = "+0"
input_l_y_plus_axis = "+1"
input_r_btn = "11"
input_save_state_btn = "11"
input_r2_btn = "9"
input_r3_btn = "2"
input_right_btn = "5"
input_state_slot_increase_btn = "5"
input_x_btn = "12"
input_menu_toggle_btn = "12"
input_select_btn = "0"
input_l_x_minus_axis = "-0"
input_y_btn = "15"
input_left_btn = "7"
input_state_slot_decrease_btn = "7"
input_r_x_plus_axis = "+2"
input_l2_btn = "8" -
@edmaul69 this is the controller "SHANWAN PS3 GamePad.cfg"
input_device = "SHANWAN PS3 GamePad"
input_driver = "udev"
input_r_y_plus_axis = "+3"
input_l3_btn = "1"
input_r_x_minus_axis = "-2"
input_l_btn = "10"
input_load_state_btn = "10"
input_start_btn = "3"
input_exit_emulator_btn = "3"
input_l_y_minus_axis = "-1"
input_up_btn = "4"
input_r_y_minus_axis = "-3"
input_a_btn = "13"
input_b_btn = "14"
input_reset_btn = "14"
input_enable_hotkey_btn = "0"
input_down_btn = "6"
input_l_x_plus_axis = "+0"
input_r_btn = "11"
input_save_state_btn = "11"
input_r2_btn = "9"
input_r3_btn = "2"
input_right_btn = "5"
input_state_slot_increase_btn = "5"
input_x_btn = "12"
input_menu_toggle_btn = "12"
input_select_btn = "0"
input_l_x_minus_axis = "-0"
input_y_btn = "15"
input_left_btn = "7"
input_state_slot_decrease_btn = "7"
input_r_x_plus_axis = "+2"
input_l2_btn = "8" -
@edmaul69 this is the controller "DragonRise Inc. Generic USB Joystick .cfg"
input_device = "DragonRise Inc. Generic USB Joystick "
input_driver = "udev"
input_l_btn = "4"
input_load_state_btn = "4"
input_start_btn = "1"
input_exit_emulator_btn = "1"
input_up_axis = "-1"
input_a_btn = "6"
input_b_btn = "5"
input_reset_btn = "5"
input_enable_hotkey_btn = "0"
input_down_axis = "+1"
input_r_btn = "7"
input_save_state_btn = "7"
input_right_axis = "+0"
input_state_slot_increase_axis = "+0"
input_x_btn = "3"
input_menu_toggle_btn = "3"
input_select_btn = "0"
input_y_btn = "2"
input_left_axis = "-0"
input_state_slot_decrease_axis = "-0" -
@chinjw ok well you are going to have to pick a controller. I can only setup one. The others might work but no guarantees of button order. I recommend the ps3 controller myself. Also is your ps3 controller using regular bluetooth or the sixad driver?
-
@edmaul69 OK， let pick PS3 (sixad driver) ... Thanks ya...
-
@chinjw alright i will work on it tomorrow.
-
@edmaul69 Thanks for your help my friend...
-
@chinjw well i got it done. ps button is the quit menu and quit game button. right shoulder is stylus button. left analog is stylus. right analog button is menu. right analog up is view a. right analog right is view b. the views change between side by side screen view, top and bottom screen view, and full screen top screen view. since i have a ps3 controller i tested it out.
https://drive.google.com/open?id=1ijFCE0QKUFvi9wNcpMTGcitXM6_otP0r
-
@chinjw i forgot to say, unzip this and put the config file in /opt/retropie/configs/nds/drastic/config/ in the config i was able to get the frame counter to stop showing the framerate but without being able to see the menu, i dont know how to make it disappear completely.
-
@edmaul69 said in DraStic (Nintendo DS emulator) OUT NOW for pi2/3!:
put the config file in /opt/retropie/configs/nds/drastic/config/
Thanks bro, will test it by tonight....
Really thanks for your help...
by the way, should i rename the file before put in the related path..?
or jz paste it without rename...? -
@chinjw when you unzip it the file inside will be named properly. Just put the drastic.cfg file in the location i posted.
-
@edmaul69 It's works~! Thanks bro..
Just wondering izzit possible to change the exit game button to <SELECT> ? -
@chinjw not really possible. The select button is a button the ds uses.
-
@edmaul69 Thanks for your help my friend...
i wondering is there any tutorial or info can show me the step to do this kinda joystick/controller mapping...
because i'm planing to get other controller soon (8bitdo NES30 Pro or SFC30) ...
it would be nice if i can do it by my self... :) -
@chinjw i can try to explain. However i happen to have one of those controllers so I could have it done for you. I will actually be best making a cheat sheet that people could use if they want to try to set them up themselves.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.