NES30 PRO/ FC30 PRO

Sébastien

yes i've followed these instructions
i've tried with and without the Hack

BuZz

@Sébastien did you reconfigure the controller in emulationstation after switching the hack mode? If you update firmware hack should be off.

ray2272

@Sébastien

I use these same gamepads for my RetroPie, and I will admit it was frustrating to get them up and running. Like you, I set it up under the inputs section of the menu that pops up when you press start, and, as a result, had to deal with the gamepad working perfectly in EmulationStation, and then doing nothing once I started a game.

Assuming that the games you're playing are not through computer emulators like DosBox (which requires its own configuration), and instead, are for old consoles leveraging emulators that work well with RetroArch, I needed to actually go into the RetroArch configuration in the RetroPie menu. Once there, under Inputs, I set both the player 1 binds and hotkey binds there. After saving the configuration settings on exit, I started a game and the controller worked perfectly.

Hope that helps you.

Rion

Reset the controller configuration by exiting EmulationStation pressing F4. Type

sudo /home/pi/RetroPie-Setup/retropie_setup.sh

Reset EmulationStation controll configuration.

Unpair your 8bitdo controller in the BT setup.
Connect your 8bitdo gamepad to your PC (fully charged) and upgrade to the latest Fw from 8bitdo's website.
Redo the controller configuration in BT Setup.
Make sure the hack option is turned "off" and that you power on the controller with start only!. On the pro only start up with power on.

After you are done redo the controller configuration in EmulationStation (restart first)

sudo reboot

kudaba

Which emulators are you using? Does it work in any emulators or just some. I know PiSnes needs some manual configuration, the default setup doesn't work.

https://github.com/retropie/retropie-setup/wiki/super-nintendo-entertainment-system#pisnes

jokey carrot

@Sébastien try turn of the mapping hack that did the trick for me

Strik9ine

Did any if this help? I've got the same issues.

neonlightning

i know this is old. but did anyone ever solve this. i've encountered it with both my zero and fc30pro

sirhenrythe5th

I just bought a FC30pro, set it to Android-Mode and hooked it up in Bluetooth-Settings.
It works perfect, no Problem.

Only thing that is a bit odd...it did not reconnect at first.
Then i set the connection to "Boot" and even if i unterstand this the way the Bluetooth Connection starts only on Boot process, the Pad connects at anytime 😲.
Well, dont unterstand this, but it works and its great!
Had not to use the hack or udev-rules, just connect and that was it.

lesk

@neonlightning

The 8bitdo controllers have different pairing modes.
https://retropie.org.uk/forum/post/149216

This worked for me!