360 Pad working in emulationstation but not in emulators

[parasven]

Info:

Pi Model or other hardware: x86 PC
Hardware:
Pentium g4560
Gigabyte GTX 1050 TI
8GB RAM
120GB SSD
RetroPie Version Used: 4.1.14
Built From: Ubuntu Install 16.04.2 + Reteropie-Setup Script
USB Devices connected: Xbox 360 Wireless Receiver, Microsoft Nano Wireless Receiver (Keyboard)
Controller used: 2 ´Wireless 360 Pads, 8Bitdo SNES30
Error messages received: None
Log found in /dev/shm/runcommand.log (if relevant): runcommand.log loads the Configfile for the 360Pad just fine atleast from what i saw yesterday
Emulator: All emulator

Hello,

i cant get my 360 Pads to work in emulators.
When i load up an emulator with turned on 360 pad it says that the pad is configured but the controls do not work.
If i use my 8bitdo pad everythingit works just fine.

The strange thing is, that the 360 Pad works just fine in emulationstation.

I have also tried both of the xbox drivers. I also tried to change the Driveretype to sdl and sdl2 but nohing worked.

Configfiles:
sven@retropie:~$ ll /opt/retropie/configs/all/retroarch-joypads/
insgesamt 20
drwxr-xr-x 2 sven sven 4096 Feb 13 12:13 ./
drwxr-xr-x 14 sven sven 4096 Feb 13 00:57 ../
-rw-rw-r-- 1 sven sven 548 Feb 12 20:51 8Bitdo SFC30 GamePad.cfg
-rw-rw-r-- 1 sven sven 845 Feb 13 02:13 Xbox 360 Wireless Receiver.cfg
-rw-rw-r-- 1 sven sven 871 Feb 12 20:15 Xbox Gamepad (userspace driver).cfg

Configfile "Xbox 360 Wireless Receiver.cfg":
input_device = "Xbox 360 Wireless Receiver"
input_driver = "udev"
input_r_y_plus_axis = "+4"
input_l3_btn = "9"
input_r_x_minus_axis = "-3"
input_l_btn = "4"
input_load_state_btn = "4"
input_start_btn = "7"
input_exit_emulator_btn = "7"
input_l_y_minus_axis = "-1"
input_up_btn = "13"
input_r_y_minus_axis = "-4"
input_a_btn = "1"
input_b_btn = "0"
input_reset_btn = "0"
input_down_btn = "14"
input_l_x_plus_axis = "+0"
input_l_y_plus_axis = "+1"
input_r_btn = "5"
input_save_state_btn = "5"
input_r2_axis = "+5"
input_r3_btn = "10"
input_right_btn = "12"
input_state_slot_increase_btn = "12"
input_x_btn = "3"
input_menu_toggle_btn = "3"
input_select_btn = "6"
input_enable_hotkey_btn = "6"
input_l_x_minus_axis = "-0"
input_y_btn = "2"
input_left_btn = "11"
input_state_slot_decrease_btn = "11"
input_r_x_plus_axis = "+3"
input_l2_axis = "+2"

Pastebin for "all/retroarch.cfg": http://pastebin.com/6eGjYLhc

"snes/retroarch.cfg":

Settings made here will only override settings in the global retroarch.cfg if placed above the #include line

input_remapping_directory = "/opt/retropie/configs/snes/"

savefile_directory = "/home/sven/RetroPie/saves/snes"
savestate_directory = "/home/sven/RetroPie/saves/snes"
#include "/opt/retropie/configs/all/retroarch.cfg"

I hope you can help me.

Regards Sven