Windows 95!
-
This post is deleted! -
i just looked at the vogons forum and they recommend the b disk on an old thread about windows 95 before it got shut down so let me know if the b version does the trick. I obviously cannot tell you where i got mine but it should be out there.
Back to your comment about the s3 trio 3d drivers. I found that win95 uninstalls the hardware after i installed the driver. Try it and then let me know if it worked for you, if it doesn't, the drivers above are the only ones that dont have an issue for me.
Finally, if a b disk fixes your issue, then i think we have successfully plumbed the depths of win95 on pi. For me 3.1 games and 95 games that dont use open_gl or directx work ok. For our higher level stuff the build will have to branch/appropriate to an svn based on hal9000 or daum that add later features. I get an error on dx games that the video card we use isnt compatible with the game.
-
@tyreal90 ok so the b disk didnt give me any error copying the files from mounted iso to mounted vhd. After installing and switching to dosbox 7.4 on the pc it doesnt do a setup before booting like the other two. So it boots straight into windows. Then i copy it my pi hard drive and it has the windows 95 boot screen then it goes to a black screen. This is also the only version that didnt give me any dll errors.
Are you using hard drive or sd card for your image file? Also can you post your entire dosbox-SVN.conf on paste.bin and post that link here? I want to see if there is something i am doing differently. Is there any programs i should install before putting on the pi?
-
https://pastebin.com/embed_js/7QEwR6rs
That is the config file on the pi of a working build I'm playing with.
Best,
Chris
Also, did you remember to bring it to 16 color mode before transferring to the pi? That always throws me for a loop.
-
im using sd cards only and i have 2 builds on an 8 gig and a 16 gig. i also have a win 98 build that installed but crashes on boot
whats paste-bin?
-
@tyreal90 paste.bin is a website that you can post the entire contents of a text file on then post a link to that text file you created on there. Really easy to do. Probably easier than using your google drive. So i should have been putting the images on the sd card. Runs a thousand times faster than a hard drive. All my other dosbox games are on my sd card. So it still is the same old thing. Question or two for you? So when the image is on your sd card, how are you mounting it in windows? And did you build the dosbox from source or just install the binary. What version of retropie are you on? I just cant figure out why it wont work on the pi for me. Also what resolution did you set it to inside of windows? I do know that there is a file dosbox has somewhere that knows if say you need to run scandisk on an image, if you replaced it with an image that was good using the same filename it would still run scandisk. If you rename an image that booted fine into windows it will rerun the initial setup. You can close it out in the middle of that and change the name back it will boot right into windows. The pi version does to. If i knew where that file was, i could use your file and boot right into windows.
Edit: i noticed you put the info to the image file inside the dosbox config file. What are you using to boot dosbox. I tried with using the premade dosbox.sh file but that didnt work with the hard drive info in the dosbox config file how you have it.
-
Windows 95 can run ok. Don't expect anything speedy. Due to new changes in DosBox windows 98 will not install. Maybe this will be fixed in a later update.
-
In regards to your questions. I mount the .vhd disk image file on a NTFS drive on either my laptop or desktop computer. The raspberry pi like fat drives but the ability to right-click and mount the .vhd in windows 10 requires the drive to be on the NTFS format. I have had to do ALOT of copying but I tinker with the windows image on my computers hard drive and then copy it wholesale onto the SD card that I will be using. I use retropie 4.0 and 4.2. I have like 3 SD cards with windows on them now and I just switch them up at will. I have not noticed a difference between the versions. I think I installed dosbox from source. I always tend to go with the first option down on the menu and if I remember correctly then that is source. Do you mean resolution on a monitor or resolution in windows? In windows I have to initially have it at 16 color and 648X480 or whatever the lowest is. The drivers off my google drive will hard-set the resolution and colors when you install them. This will change the settings permanently until you reinstall the drivers and select a different choice. I never change the name of the disks I create. Once they are created I change the command line code instead on dosbox.conf. Dosbox on my pi has an option to run it. I just hit that and my mount codes are applied from the config file. On some of my sd cards I have to type
boot -l cafter I boot dosbox. Typing boot -l c automatically starts the windows start-up. I often get a screen with weird green lines but when I hit enter it starts scandisk. Scandisk proceeds to work and then it boots Windows. I haven't seen a difference either way if I automatically boot or manually boot windows.
edit - I agree that we need to get it working for you. Would it be helpful for me to do a build, write down my complete steps, post it here and see if it works for you? I mean a complete from scratch build re-downloading everything?
-
@tyreal90 you can mount a fat vhd. You just have to do it in disk management. How are you putting the vhd in ntfs instead of fat 16?
Edit: can you tell me which version of retropie you are using?
-
I apologize if i wasnt specific about which drive was ntfs. So I make the disk fat16 like it says to do through the tutorial, but i make it on a disk drive on my computer that is ntfs. then i open it while it is on the drive by right clicking it in exporer and choosing the 'mount' command
-
@tyreal90 strange. My pc is windows 10 with ntfs and i do t have the mount option. I have to go into disk management and mount it.
-
@tyreal90 to tell go into retropie setup and dont update retropie setup. At the top it should tell you.
-
I still couldn't find which it was so I will be testing both. : ) How are things on your end? Still not working? I lost count but I think I've installed windows95 like 10 times and copy/pasted the VHD onto the pi about 100 times.
-
@tyreal90 still the same thing. However i dont think 256 colors is supposed to be an issue for you either. The s3 driver loads and displays in 256 colors when i go into safe mode i even installed the trio64 driver and still the same issue. I tried setting it to every single color pallet and rebooting out of safe mode and back into regular mode and still nothing. I am going to try an older copy of dosbox and see if it changes any. If you do find out what version of retropie you are using let me know.
-
the image I have in now is 4.2.1 and it works ok. I'm trying the dosbox off of source but I had been using binaries in the past. I uninstalled the binaries and just installed source.
edit- the source install works for me as well
-
@tyreal90 i copied my rom folder and my and my opt folder to my pc. I am going to make a backup image of my 64gb sd card and then update. There might be an update like an sdl or something that makes it work on the 4.2.xx retropie. I am going to try an update. Then i will try a fresh install if that doesnt work.
-
Sounds good. Good luck and let me know how it goes!
-
I just had an epiphany for why im having an easier time moving files into my .vhd's. i have daemons tools lite installed for .iso files and the like on my computer. i just realized (after googling) it mounts .vhd files as well. install it (you can google for the latest version) and see if it works! I'm sorry I didn't think of this sooner.
p.s. just be careful to not let daemons tools install any crud during its installation (the newer versions always ask if you want a searchbar or some other mess)
-
on another note - there are two versions of the windows 95 b (2 and 2.1) I am almost a 100% sure that I have 2 because when I manually install the USB drivers that come with 2.1, my image stops booting properly. Make sure that your windows 95B cd has no USB drivers because our version of dosbox is unstable with them.
I just had to put a new operating system on my wife's laptop (win 8.1) and so I am going to try to start from scratch and replicate again the results I'm having. Will post soon.
-
@tyreal90 i was using 2.0 not 2.1. I am going to mess around with a as i got further with that one than any others.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.