DualsShock 4 Solution

AlexMurphy

@mosi0815 the same thing can be achieved by running sudo rpi-update in the console. However, I don't think this is recommended as 4.9 is not a stable release. The kernel RetroPie uses is currently 4.4.50 which is the latest stable version.

mosi0815

I got a command not found when I tried to start rpi-update. Don't know why. Whatever.
It's easy to try and revert. If everything works for my use case I don't care if it's stable. :)

AlexMurphy

@mosi0815 Coincidentally, the new kernel release (stable) is now 4.9.24, so I wouldn't worry too much.
EDIT: This is as of 2 days ago.

DarkWolf

@mosi0815 I had no problems using a ds4 controller via bluetooth... First connected some weeks ago

zeldalate

@mosi0815 the only question I have Is without the ds4drv is there any way to change the light bar color? Because thats a cool little feature.

zeldalate

@mosi0815 if "sudo rpi-update" command does not work run "sudo apt-get install rpi-update" and then use use "sudo rpi-update"

Earlier versions of raspbian do not have rpi-update installed by default.

mosi0815

@AlexMurphy Yes it's now in the repo. So DS4 works out of the box if all updates are installed. The only thing not working on the Pi is rumble. It does on my PC. So I read through kernel changelogs. 4.10 supports rumble.

mosi0815

@zeldalate Yes it's possible. Just read through the drivers source. The default behavior ist to assign the same colors the PS4 does. With the exception that a real PS4 remembers which controller has which number. The Linux kernel just uses the connection order.
Under /sys/class/leds/ you find a folder for every LED and one to toggle them. (red/green/blue/global)
It looks something like this: 0005:054C:05C4.0005:blue

Let's set it to pink at full brightness:

sudo -i
cd /sys/class/leds
echo 245 > 0005:054C:05C4.0005:red/brightness
echo 17 > 0005:054C:05C4.0005:green/brightness
echo 230 > 0005:054C:05C4.0005:blue/brightness

To turn them off:
echo 0 > 0005:054C:05C4.0005:global/brightness

To turn them on again to the last set color:
echo 1 > 0005:054C:05C4.0005:global/brightness

DarkWolf

@mosi0815 that is some great infos there! Gonna try that out next week as I had a lot of problems with the ds4drv

zeldalate

@mosi0815 thanks for the reply I will test that out soon. It makes perfect sense to me sounds simple enough. Is echo 1 to enable and echo 0 off? Nvm ill try it out tomorrow if I can.