Game pad to buy

Robinson

One more question.
Is there any difference in playing games (Raspberry Pi 4B) using USB 2.0 and 3.0? Any advantage of 3.0 for playing retro games?

lostless

@Robinson with a USB controller, defiantly no. With games on an external drive, there is no advantage. these games load slow and USB 2 can handle the bandwidth with no issue.

windg

I am running roms from a usb 2 and i never had issues with the read/write speed.
I have the WD Elements 2TB 2.5'', without separate PSU, connecting to the Pi usb ports and it is working without issues (tested with RPi3/RPi4 with official PI PSU).

Robinson

Has anyone already tried it with Raspberry Pi Retropie?

https://www.amazon.com/Ultimate-Wireless-Controller-Windows-PC-Raspberry/dp/B0C2V3QPN7/

Skibumwi

@Robinson said in Game pad to buy:

@Addison Thanks.
I think I can wait. :)
It is not Bluetooth but wi-fi dongles will be OK too, I hope.
I just wonder if my Pi 4B will have enough power for an HDD and two game dongles. Or will a self-powered USB hub be necessary?

I've tried two externally powered USB hubs and neither worked for me. A USB powered hub seems to work just fine.

Ski

Robinson

@Addison said in Game pad to buy:

If you can wait a month.
https://www.amazon.com/Ultimate-Wireless-Controller-Windows-PC-Raspberry/dp/B0C2V3QPN7/

Yes, I have waited and bought two. :)
Now it seems I need to learn some bacics because I have not managed to configure neither of them yet. :(

When the light on the dongle stays solid, does it mean the dongle and the gamepad have been paired successfully?
I wonder why ABXY keys are arranged differently than what I mainly see on the internet. X and Y are swapped. Same as A/B.
When I connected the first dongle and started to configure it, it was going well until HOT KEY configuration. I pressed various keys but there was no reaction and so I could not get to "OK" to finish the configuration process. Does anyone know why?
Then I connected the other identical dongle but pressing keys did not produce any effect on the configuration screen. I assume there is a way to configure the keys using an alternative method?
Which keys would you configure as SELECT, START and HOT KEY?
https://download.8bitdo.com/Manual/Controller/Ultimate/Ultimate-C-2.4G-Wireless-Controller.pdf

Thanks for anybody's help.

Robinson

I have again run through the configuration procedure but again, no luck.
This time I stopped at "OK" button even though I did as suggested:

When you get to OK press the button you have configured as "A".

mitu

You should have started a separate topic for the issue regarding the controller configuration.

Now it seems I need to learn some bacics because I have not managed to configure neither of them yet. :(

You can look in the docs to get the basics first.

When the light on the dongle stays solid, does it mean the dongle and the gamepad have been paired successfully?

Usually yes.

I wonder why ABXY keys are arranged differently than what I mainly see on the internet. X and Y are swapped. Same as A/B.

There are 2 different layouts for controllers on the market regarding the right buttons - the original Nintendo SNES arrangement or the XBox style naming, which has the button names switched.

When I connected the first dongle and started to configure it, it was going well until HOT KEY configuration. I pressed various keys but there was no reaction and so I could not get to "OK" to finish the configuration process. Does anyone know why?

This usually means you're either trying to map a button you already configured or the button produces no input in EmulationStation - it functions internally to the gamepad to trigger other functions. Which button are you trying to map as Hotkey enable and it's not working ?

Then I connected the other identical dongle but pressing keys did not produce any effect on the configuration screen. I assume there is a way to configure the keys using an alternative method?

Is the dongle properly connected with the USB port and the controller ? Did you connect the controller in the same mode (wireless vs. wired).

Which keys would you configure as SELECT, START and HOT KEY?

Whichever you feel more confortable - looking at the diagram of the controller, you can configure the + (Menu) button as Start and the - button as Select. If the Star button is read properly, you can use it as a Hotkey Enable button, otherwise just skip the button and accept the Select button as Hotkey Enable when asked.

I have again run through the configuration procedure but again, no luck.

Are you sure you're pressing the A button or the one you mapped to the A button ?

Robinson

Thanks.
I think I somehow managed to get both gamepads working after 1:00 am.
Is there a timeout for configuring buttons? I may have been doing it for too long but I doubt there is timeout.

Now I just need to get hold of proper ROM files and work out how to select and start games. :)

Addison

From a review on Amazon.

"MAKE SURE YOU PAIR IT BY HOLDING BOTH THE HOME BUTTON + B."

As for a timeout when configuring the buttons.

In Retroarch, I think it's 5 seconds per request.

In Emulation Station, perhaps 3 seconds.

Not really understanding your question though.

I was expecting better reviews for that newest controller from 8 Bit.

Somewhat feel bad for suggesting this. :/

Robinson

You shouldn't feel bad. It is just my first time with RPi and gaming.
I am pretty sure the game pad is very good. If there is timeout, then it must be the reason I could not complete the configuration.
Both my game pads are working now. Now it is time for me to learn how to play various games.
Thanks. :)

bhuthogg

This post is deleted!