FBA vs. MAME

grant2258

ss

dont mean sound just performance you can adjust the brightness in 2003+

grant2258

hhmmm i think i will update my pi some neogeo games need a little boost as well 2+b 30 3+b is worth the update. Ill put lakka on the pi im using now. Pi hut here i come :D

robertvb83

@loggahead said in FBA vs. MAME:

@markwkidd said in FBA vs. MAME:

you still can't reach without th

That is correct on the mame_keyboard. I ONLY use it if absolutely neccessary and that typically only happens when I need to modify a specific game's controls that isn't possible in the Quick Menu. For example, I needed to map Robotron on my cabinet to use my P2 joystick as the "P1 Right Joystick".

I'll start using the retropad menu and see if I come across any limitations.

i just stumbled on this and now im very excitet. i searched the whole internet i thought this wasnt possible! can you help me please? im not sure if this is what you did... i have two zero delay arcade controllers (for 2 players). how exactly did you manage to configure robotron to use p2 Joystick as second Joystick for p1? i dont know how to use or what the mame keyboard is

markwkidd

@robertvb83 are your zero delay encoders seen as a keyboard or as a gamepad?

robertvb83

@markwkidd they are each seen as a seperate gamepad
they are detected as dragonrise usb controllers in autoconfig

markwkidd

@robertvb83 said in FBA vs. MAME:

@markwkidd they are each seen as a seperate gamepad

Great. I wanted to know what part of the code that this investigation would begin with.

Here's what I think is the situation: I don't think the code we have accommodates the Robotron input scheme but if you're willing to come over to github and work through it with me I believe there are at least two possible tidy approaches to solving this that are ultimately not going to take more than an hour or two to figure out.

Could you please post an issue in github with the words Robotron controls in the title? https://github.com/libretro/mame2003-plus-libretro/issues

grant2258

@markwkidd said in FBA vs. MAME:

the co

mark its the same controller as im using its a gamepad input :)

markwkidd

@grant2258 said in FBA vs. MAME:

@markwkidd said in FBA vs. MAME:

the co

mark its the same controller as im using its a gamepad input :)

That can't hurt! @grant2258 this is what I mean by two possible ways to fix this:

I think there is some unused MAME code which we might be able to activate
Or we might just look at the MAME code and port/move it to the libretro input processing in mame2003.c

robertvb83

@markwkidd done git hub issue

i dont know what you are talking about, but please tell me what i can do to help :-)

UDb23

@robertvb83 said in FBA vs. MAME:

how exactly did you manage to configure robotron to use p2 Joystick as second Joystick for p1?

There is an option specific for dual joystick games in lr-mame 2003.

The other way to do that is to use the Mame TAB menu to remap input of joystick 2 to joystick 1 (gamepad 1 in your case). Have you tried already?

robertvb83

@udb23 the option in lr mame is not working for me because i use seperate usb controllers for p1 and p2...
however via mame menu i finally made it work!

@grant2258 oh my god you are right it is working! via mame menu i can assign the p2 buttons totally flexible. i did not know about this possibility i always used retroarch menu...
THANK YOU! i was close to giving up here after searching the compkete internet (grant was pointing me into that direction ib github issue discussion)
its so cool to play robotron now like its meant to be played!

markwkidd

Sorry we're now hopping back and forth between here and github.

In conclusion @robertvb83 , do I understand correctly the "Right Stick to Buttons" option is not relevant to setting up the joystick on a player 2 for games like Robotron? (From its name I would have not expected so but sometimes things have different/additional functions . I have never used that core option!)

grant2258

@robertvb83 said in FBA vs. MAME:

@udb23 the option in lr mame is not working for me because i use seperate usb controllers for p1 and p2...
however via mame menu i finally made it work!

@grant2258 oh my god you are right it is working! via mame menu i can assign the p2 buttons totally flexible. i did not know about this possibility i always used retroarch menu...
THANK YOU! i was close to giving up here after searching the compkete internet (grant was pointing me into that direction ib github issue discussion)
its so cool to play robotron now like its meant to be played!

@markwkidd done you a solid he made this automatic for you. if you compile the source it will just work needs testing in other dual player player games though nice job mark!

to test you will need to delete your cfg/robotron.cfg

grant2258

@robertvb83 said in FBA vs. MAME:

@udb23 the option in lr mame is not working for me because i use seperate usb controllers for p1 and p2...
however via mame menu i finally made it work!

@grant2258 oh my god you are right it is working! via mame menu i can assign the p2 buttons totally flexible. i did not know about this possibility i always used retroarch menu...
THANK YOU! i was close to giving up here after searching the compkete internet (grant was pointing me into that direction ib github issue discussion)
its so cool to play robotron now like its meant to be played!

Yes this is one of my concerns of moving over to a complete retroarch input system.

It will rip apart a perfectly working flexable system (tab menu) and doesnt have the functionality to do all the options the mame tab can do(yet). Retroarch is also not very user friendly to remap easily imho but thats just my thoughts.

Im curious how fba handles this situation

markwkidd

Edit: Nevermind. My proof needs to be in the pudding.

markwkidd

One more update. There is not a going to be a default mapping for the dual-joystick setup after all, but I did just add a core option that you can toggle to enter "Dual Joystick" mode for this kind of configuration. It is labelled "Dual Joystick Mode (Players 1 & 2)" in the RetroArch menu.

This core option uses a new way of integrating the libretro and MAME input systems that I am very excited about.

It's kept me up late tonight working because unlike similar past efforts to provide alternate modes for input, this core option keeps the MAME remapping menu up to date and accurate as you toggle the Dual Joysticks back and forth.

robertvb83

@markwkidd said in FBA vs. MAME:

Sorry we're now hopping back and forth between here and github.

In conclusion @robertvb83 , do I understand correctly the "Right Stick to Buttons" option is not relevant to setting up the joystick on a player 2 for games like Robotron? (From its name I would have not expected so but sometimes things have different/additional functions . I have never used that core option!)

yes correct this option is not relevant for my use case it is relevant if you have for example an xbox controller you can assign the right Joystick to button functions i guess (i dont use this). but no button binding from differen gamepads to one player is possible in retroarch

robertvb83

@markwkidd wow that sounds really really cool! because i think most noobs like me do not understand that there is a mame menu beyond the retroarch menu. it can be confusing, so such a switch you are talking about seems the perfect solution, you never know if peopledo things completely different and you keep everything as is but with a nice option.

i will test if i have time, can i just update mame2003-plus via retropie?

markwkidd

@robertvb83 said in FBA vs. MAME:

@markwkidd wow that sounds really really cool! because i think most noobs like me do not understand that there is a mame menu beyond the retroarch menu. it can be confusing, so such a switch you are talking about seems the perfect solution, you never know if peopledo things completely different and you keep everything as is but with a nice option.

i will test if i have time, can i just update mame2003-plus via retropie?

If you have a chance to test it that would be very greatly appreciated. Yes you can just update the core via RetroPie-Setup.

Do you have experience setting RetroArch core options? In this case it would be best to change the option only for the games that need it. Setting that option should be the only configuration involved, and it should adjust the mapping to be just the same as what you did manually in the MAME menu earlier.

robertvb83

@markwkidd said in FBA vs. MAME:

@robertvb83 said in FBA vs. MAME:

@markwkidd wow that sounds really really cool! because i think most noobs like me do not understand that there is a mame menu beyond the retroarch menu. it can be confusing, so such a switch you are talking about seems the perfect solution, you never know if peopledo things completely different and you keep everything as is but with a nice option.

i will test if i have time, can i just update mame2003-plus via retropie?

If you have a chance to test it that would be very greatly appreciated. Yes you can just update the core via RetroPie-Setup.

Do you have experience setting RetroArch core options? In this case it would be best to change the option only for the games that need it. Setting that option should be the only configuration involved, and it should adjust the mapping to be just the same as what you did manually in the MAME menu earlier.

now i feel a little dumb... i deleted the /roms/mame-libretro/mame2003-plus/cfg/robotron.cfg EDIT: and the default.cfg (undo the mame menu config)
i then updated mame2003-plus from source, now in RGUI i have the option available 2 Joystick mode. i can set it to enable then i create game override file.
but nothing happens...
i then close the game (start+select) and restart robotron... in RGUI the option is disabled again...? what do i do wrong... seems not so intuitive for me