Multi Switch Shutdown Script!

cyperghost

@denisuu yes that is a stripped down version. Now use the if clause in line 28 and write your reboot command in. You can further strip down this if you want. Take care about the reset value I am not sure what it's default is. 0 or 1 just pretest with echo command.

denisuu

I compiled raspi-gpio on OSMC and the script is working now!!! I wouldn't know how to further strip this down, it's a miracle I even got this far!

The onlything left to do is the reboot button.

When it's finished is it ok if I put them on Github? All credits to you ofcourse!

denisuu

It was just as simple as putting sudo reboot on the line you said! It seems the button doesn't work every time, sometimes I have to press twice but good enough! Maybe it's just the case...

I put this here:
https://github.com/Denisuu/OSMC_NesPi-SuperPi_Safe-Shutdown

I haven't linked it anywhere so if you have any objections let me know!

cyperghost

@denisuu said in Multi Switch Shutdown Script!:

I compiled raspi-gpio on OSMC and the script is working now!!! I wouldn't know how to further strip this down, it's a miracle I even got this far!

Nice job. This is IMHO the best solution to go

When it's finished is it ok if I put them on Github? All credits to you ofcourse!

Do as you like. I take a look to your git looks good.

Excuse me for my late reply I was on vacation and the internet connection was terrible bad so there was just room for some phone messaging and email. For goodness SMS worked very good ;)

cotton

I am just re-doing a new OSMC installation with Retropie embedded in it so I thought I would get a retroflag and finally put it in a case!

@denisuu
I followed your instructions on your git page. I have a question on step 1) You said I could run the command for OSMC as a one liner, but I got permission denied, I just had to run it as sudo in pieces; that worked until i got to the last command "make install". I get the following message:

osmc:/usr/src/raspi-gpio$ make install
gcc -DPACKAGE_NAME=\"raspi-gpio\" -DPACKAGE_TARNAME=\"raspi-gpio\" -DPACKAGE_VERSION=\"0.2\" -DPACKAGE_STRING=\"raspi-gpio\ 0.2\" -DPACKAGE_BUGREPORT=\"serge@raspberrypi.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"raspi-gpio\" -DVERSION=\"0.2\" -I.     -g -O2 -MT raspi-gpio.o -MD -MP -MF .deps/raspi-gpio.Tpo -c -o raspi-gpio.o raspi-gpio.c
/bin/bash: gcc: command not found
Makefile:361: recipe for target 'raspi-gpio.o' failed
make: *** [raspi-gpio.o] Error 127

Am I missing something?

denisuu

I'm not sure, I tried it a couple of days ago and it was working.

Maybe you can try and compile it from here? https://github.com/RPi-Distro/raspi-gpio

cotton

Ok,

I reinstalled Retrosmc and that made it work. Works like a charm; if I had a way, id buy you both a drink.

cyperghost

@denisuu I lift your OSMC modification into first posting. Glad you compiled raspi-gpio to OSMC

vivesladron

Hi, noob here
I don't undestand 4 and 5 steps:

Now edit ES autostart with nano /opt/retropie/configs/all/autostart.sh and add script to like ....
/home/pi/RetroPie/scripts/multi_switch.sh --nespi+ & but BEFORE the last line emulationstatio #auto

What I need if I want to make a power off option in retropie menu?

Thanks

cyperghost

@vivesladron What do you want to do?

vivesladron

@cyperghost I want to do that

but using your script

cyperghost

@vivesladron then change the delieverd scripts from YouTube with calls according to help in multi_switch e.g. bash /path/to/multi_switch.sh --es-restart & to restart ES properly.

vivesladron

Ok
I designed my power button menu

And I edited es_systems.cfg
<system>
<name>power</name>
<fullname>Power</fullname>
<path>/home/pi/RetroPie/scripts</path>
<extension>.rp .sh</extension>
<command>/home/pi/RetroPie/scripts/multi_switch.sh --es-poweroff</command>
<platform/>
<theme>power</theme>

Is that a good option to do it?
Will it save metadata and shutdown the system?

How can I run it directly without the next screen?

Thank you!

Drakaen391

try changing the path to the full path to the script, to see if that works

vivesladron

@Drakaen391 Thanks I’ll try that

cyperghost

@vivesladron Do following

on es_systems

<system>
<name>power</name>
<fullname>Power</fullname>
<path>/home/pi/RetroPie/scripts</path>
<extension>.sh</extension>
<command>bash %ROM%</command>
<platform/>
<theme>power</theme>

Then put your script files into /home/pi/RetroPie/scripts

nano "/home/pi/RetroPie/scripts/PowerOff.sh

#Poweroff Script by cyperghost
/home/pi/RetroPie/scripts/multi_switch.sh --es-poweroff &

nano "/home/pi/RetroPie/scripts/Restart ES.sh"

#Restart EmulationStation by cyperghost
/home/pi/RetroPie/scripts/multi_switch.sh --es-restart &

That should work.

vivesladron

@cyperghost

That’s perfect
Thanks!

What if I want only poweroff by pressing just once from the power menu?

I didn’t check @drakaen391 suggestion yet

cyperghost

@vivesladron

What if I want only poweroff by pressing just once from the power menu?

Not possible - therfore someone has to change the code of EmulationStation.
You've got the same behaviour with KODI. One file to start but you have to enter the "system" and to start the single "ROM" file ;)

vivesladron

@cyperghost
I'm running the ROMs from a USB drive and I'm having problems with the scripts

/home/pi/RetroPie/scripts/PowerOff.sh: line 2 /home/pi/RetroPie/scripts/multi_switch.sh: Permission denied

I tried with chmod +x but no difference
Do you know how to fix it?

Thanks

cyperghost

@vivesladron Shure... just add bash command inside the scripts

so it will look like
bash /home/pi/RetroPie/scripts/multi_switch.sh --es-restart &