Hexen II - uHexen II: Hammer of Thyrion source port on RetroPie/Raspbian (Ready for download)

QuakeGuy

Hi OldSchool. You are using the runcommand tool to start the hexen2-binary, so you have to configure the location of your hexen-binary also. In this case look for the file configs/ports/hexen2/emulator.cfg. The file should point to your hexen2:

uhexen2 = "/usr/games/hexen2 %ROM%"
default = "uhexen2"

Just create it, if the file is missing or start hexen2 without runcommand.

My command line for hexen2 is

"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 _PORT_ "hexen2" ""

and for the misson pack

"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 _PORT_ "hexen2" "-portals"

tpo1990

@OldSchool Yes its probably just a line that you need change in order for the Hexen 2 binary to load the mission pack.

The suggestion that @QuakeGuy comes up with seems like a feasible solution to accomplish it.

OldSchool

@QuakeGuy @tpo1990

My emulator.cfg file says

hexen2 = "/opt/retropie/ports/hexen2/hexen2"
default = "hexen2"

and the Hexen 2 Thyrion Source Port works great, so I'm assuming while the line isn't the exact same as yours is, it functions correctly. But when I use the ssh file with the command line you said to use

"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 _PORT_ "hexen2" "-portals"

all it does is launch Hexen 2, and not the Portals missions pack. It starts Hexen 2 up great, but it doesn't seem to direct it to load pak3.pak from the portals folder, which is itself inside my hexen2 folder where I believe it is supposed to be. I'm just stumped as to what the problem is, because I've tried all the instructions here. I'm truly lost and maybe it just isn't going to work at the moment.

tpo1990

@OldSchool Use this approach that i did in order to get Portal of Praevus working. This should work 100%.

Missionpack - Portal of Praevus
First Copy the "portals" folder to /home/pi/RetroPie/roms/ports/hexen2/
Copy Hexen II.sh and rename it to Hexen II Mission Pack: Portal of Praevus.sh.
Edit Hexen II Mission Pack: Portal of Praevus.sh file with this line:

"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 "/opt/retropie/ports/hexen2/hexen2 -portals"

OldSchool

@tpo1990

I really appreciate the help you've given me. Sadly that didn't work either, which is weird. It still just loads up Hexen 2 like normal. Am I missing a file in the portals folder? I copied over the entire folder from my PC installation, which contains
config.cfg
default.cfg
hexen.rc
infolist.txt
pak3.pak
progs.dat
puzzles.txt
strings.txt
Uninst.isu

It's confusing that it won't just direct to pak3.pak, but rather loads up regular Hexen 2 instead. I remember making separate sh files for the Doom sequels, and they all worked fine. Not so much with this I guess.

tpo1990

@OldSchool Thats weird. The way i do it should work since all it does is using the same method as if you were running hexen2 hammer of thyrion in Windows.

In my hexen2 installation i have put the portals folder inside /home/pi/RetroPie/roms/ports/hexen2 folder and not in hexen2/data1/. That means that inside my hexen2 folder i have 2 subfolders named "data1" and "portals"

Have you tried to do the same with the portals folder?

My portals folder contains these files.
default.cfg
hexen.rc
infolist.txt
pak3.pak
progs.dat
puzzles.txt
strings.txt

QuakeGuy

@OldSchool your emulator.cfg misses something, the %ROM% part. it should look like this:

hexen2 = "/opt/retropie/ports/hexen2/hexen2 %ROM%"
default = "hexen2"

this is for the 2nd "" after your PORT part in the runcommand statement. now

"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 _PORT_ "hexen2" "-portals"

works.

otherwise u can start hexen2 without runcommand. the statement then will look like this

/opt/retropie/ports/hexen2/hexen2 -portals

my data folders are in /home/pi/.hexen2/data1 -> Hexen 2 and /home/pi/.hexen2/portals -> Portal of Praevus.

RetroFreak89

I dont want to change subject but im in bit clueless...
im about to start for my doom/hexen/heretic pi project but im confused what the best way to go is should i go Raspbian or Retropie also what is doom best performing port??

mitu

@RetroFreak89 RetroPie is Raspbian on the PI.

RetroFreak89

@mitu huh?? So retropie ES is raspbian??? Well let me put it this way what is best to play these fps ports on ES or raspbian desktop? Or does both give same performance and have the same ports??

mitu

@RetroFreak89 Please stop hijacking other topics with your questions. You already have a topic opened for it, add your questions there.

RetroFreak89

@mitu said in Hexen II - uHexen II: Hammer of Thyrion source port on RetroPie/Raspbian (Ready for download):

@RetroFreak89 Please stop hijacking other topics with your questions. You already have a topic opened for it, add your questions there.

I do not my topic open for it is about doom im asking you if retropie ES is raspbian or not but whatever because you told me IN THIS TOPIC that it was?? But whatever have it your way, peace...

tpo1990

@RetroFreak89 Please ask only questions that are relevant for Hexen 2 in this topic. If you have any other questions then open a new topic instead.

Thank you.

ExarKunIv

@QuakeGuy thanks for this. it was a great help.

the only thing is i cant get the kill_hexen2.sh to run when i press the buttons.
any thoughts

right now i have a key mapped to the Y key so i can exit the game

lol

QuakeGuy

ExarKunlv: I assume you followed my instructions closely. Can you post your xboxdrv_hexen2.cfg file? The last line in my example is:

guide+start=exec:/opt/retropie/configs/all/kill_hexen2.sh

That means bind the key combo Guide-button with Start-button pressed to this script. In your case for the Y key it would be:

[evdev-keymap]
BTN_WEST=y
[ui-buttonmap]
y=exec:/opt/retropie/configs/all/kill_hexen2.sh

Just the important parts of the cfg. The script is made executable? Just test it over ssh while while Hexen2 is running. You should close Hexen2 remotely so. When this works, there is something else wrong.

retropi19

Hey there i got an error in the installation by the script
error running tar -xv -z -C
/home/pi/RetroPIe/roms/ports/hexen --strip-components 1
hexen2demo_nov1997/data1 returned 2

also the address to get the demo is not reachable anymore

instead you can replace it with this
https://liquidtelecom.dl.sourceforge.net/project/uhexen2/Hexen2Demo-Nov.1997/hexen2demo_nov1997-linux-i586.tgz

tpo1990

@retropi19 What RetroPie version are you running since you received the error in the installation process?

I just tested the download link for the Hexen 2 demo: https://netix.dl.sourceforge.net/project/uhexen2/Hexen2Demo-Nov.1997/hexen2demo_nov1997-linux-i586.tgz

It works perfectly fine for me.

retropi19

@tpo1990 still is not working with me strange
the error was about the demo download that why the installation was stopping
can you put to the script to by-pass the demo if its not found and continue the installation?

tpo1990

@retropi19 The error should not be caused by the demo download link not working. It is simply that it can not extract it hence why it is failing with tar.

I have seen this before. Try updating your RetroPie installation to the latest version and then try running the scriptmodule again.

OldSchool

@QuakeGuy

I've forgotten about this for awhile in my frustration, but I checked this thread again and sure enough, adding %ROM% to emulator.cfg and changing the command line was it. Unbelievable. Such a small change to make, but of course the smaller it is the harder it is to notice that it's incorrect. It works perfect, thank you so much for all of your help, and also to @tpo1990. I feel dumb, but whatever. It's working, and that's all I really care about. Couldn't have managed it without your guys' help.