Blake Stone - BStone source port

cyperghost

@tpo1990 I tried ECWolf on a Windows Mashine and there Wolf3d, SoD and Noah are running.

ExarKunIv

@tpo1990 if there is a way to get corridor 7 working, im all for it.

not that i would have a clue on how to get ECWolf to work. so ill wait till someone with way more knowlage then I to take a stab. :)

tpo1990

@cyperghost said in Blake Stone - BStone source port:

@tpo1990 I tried ECWolf on a Windows Mashine and there Wolf3d, SoD and Noah are running.

Then it should also work on Raspberry Pi if building from source still works.

tpo1990

@ExarKunIv Yes ECWolf will eventually at some time support Corridor 7 just like Super 3D Noah's Ark.

terrorpup

@tpo1990 said in Blake Stone - BStone source port:

wget https://raw.githubusercontent.com/tpo1990/BlakeStone-RPI/master/bstone.sh -P $HOME/RetroPie-Setup/scriptmodules/ports/

WOW, thanks guys, I been working on a first-person shooter this build this was a great add.

moltke44

Just saw this and super happy. Loved this when younger, always felt under appreciated. Had a boot disk I'd use to play this quite often. I played a lot of Doom, but also this always stuck with me. The sound effects still ring true in my mind. Thanks,

tpo1990

@moltke44 Good to hear that i am able to make others gaming experience even better by sharing with the RetroPie community. As it works good enough, I still think the Blake Stone experience could be even better by improving it.

tomybyte

@tpo1990
Is it correct that the game not started without startx?
/dev/shm/runcommand.log

BStone Log
==========
Version: 1.1.13
CRITICAL: Failed to initialize SDL: No available video device

And then if I start the game with startx keyboard is not working! Therefore I start it with --vid_windowed option. Then Keybord is working!

/opt/retropie/configs/ports/bstone/emulators.cfg

bstone = "startx /opt/retropie/ports/bstone/bstone --aog --no_screens --vid_windowed --vid_mode 1920 1080  --data_dir /home/pi/RetroPie/roms/ports/bstone/aog --"
default = "bstone"

But my X360 Gamepad is not working (also with sudo startx). What is the trick?

/dev/shm/runcommand.log

Parameters:
Executing: startx /opt/retropie/ports/bstone/bstone --aog --no_screens --vid_windowed --vid_mode 1920 1080  --data_dir /home/pi/RetroPie/roms/ports/bstone/aog -- -- vt1 -keeptty


X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.15.0-48-generic armv8l Raspbian
Current Operating System: Linux tomgamez 4.19.66-v7l+ #1253 SMP Thu Aug 15 12:02:08 BST 2019 armv7l
Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=DC:A6:32:27:FF:59 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 consol
e=tty1 root=PARTUUID=fe01d7db-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
Build Date: 05 June 2019  12:49:54PM
xorg-server 2:1.20.4-1+rpt1 (https://www.debian.org/support)
Current version of pixman: 0.36.0
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Sat Nov  9 16:40:17 2019
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
BStone Log
==========

Version: 1.1.14


Data path: "/home/pi/RetroPie/roms/ports/bstone/aog/"
Mod path: ""
Profile path: "/home/pi/.local/share/bibendovsky/bstone/"
Forcing "Aliens of Gold (full)"...
Found "Aliens of Gold (full)" v2.0.
VID: Initializing a system...
VID: Creating a window...
VID: Initializing a renderer...
VID: Available renderer drivers:
1. opengl
2. opengles2
3. opengles
4. software
VID: Using VSync...
VID: Creating a renderer...
VID: Quering renderer for info...
VID: Current renderer: "opengl".
VID: Looking up for a texture pixel format...
VID: Allocating a texture pixel format...
VID: Initializing textures...
VID: Creating a screen texture...
VID: Creating an UI texture...
VID: Creating a screen texture...
ALSA lib pcm.c:8424:(snd_pcm_recover) underrun occurred
ALSA lib pcm.c:8424:(snd_pcm_recover) underrun occurred
xinit: connection to X server lost

waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.

tpo1990

@tomybyte Startx is only used to start up the X11 window or Raspbian desktop if you have that installed on your RetroPie system. The port should be able to run under framebuffer or command line as well as Emulationstation with it's own runcommand file by default.

From looking at your runcommand.log it seems like the game has failed to run SDL. Do you have same the error with running other ports?

Your Bstone emulators.cfg file should look like this:

bstone = "/opt/retropie/ports/bstone/bstone --data_dir $romdir/ports/bstone/aog"
default = "bstone"

Keyboard should work directly after installing the port.

If you want to use your X360 Gamepad with Bstone port you will have to use the xboxdrv package since the port can only use a keyboard.

tomybyte

@tpo1990 thanks for Your feedback!

if I start bstone without startx in emulators.cfg then I get the error:

CRITICAL: Failed to initialize SDL: No available video device

Your port Return to Castle Wolfenstein I also start with startx but my X360 Gamepad works fine in it

/opt/retropie/configs/ports/rtcw-sp/emulators.cfg                                                                                                                                                                   
rtcw = "startx /opt/retropie/ports/rtcw/iowolfsp.arm"
default = "rtcw"

The xboxdrv package is installed in Retropie.
How can I configure xboxdrv to map the Bstone keyboard keys?

Thanks a lot!

Sincerely

tpo1990

@tomybyte Appreciated.

Using the trigger startx should not be required to launch Bstone source port or any other given port as far as i know. What version of RetroPie and Raspberry Pi board are you using?

Were you able to run Bstone directly after the first time that you downloaded the scriptmodule and installed it through RetroPie setup?

Did you try reinstalling Bstone from RetroPie setup to see if it fixes the SDL error?

Xboxdrv guide for RetroPie is here. I suggest looking through the docs first before use. If you have trouble with getting it to work, then i may be able to share some more information on how to use it. Also it is noted that you should only be using xboxdrv if the source port/game does not natively support a gamepad.

tomybyte

@tpo1990 thank You for Your feedback again!
I use the Pi4/4GB with Unofficial RetroPie Buster (Pi4) beta 5 by monkaBlyat
The xboxdrv Documentation I know, but is more generic. So I had hoped You have an bstone adapted script ;)
But anyway, many thanks I will try to map the needed keys and share the result here...

Sincerely

tpo1990

@tomybyte Your welcome. :-)

Ah i see, then that's why it is not working correctly since you are using a Pi4. As RetroPie has not been officially released for the Pi4 yet it is uncertain to say if the existing source ports that i created a scriptmodule for will work or not.

That is because xboxdrv is able to map keyboard input to any gamepad and people are using different gamepads for their own RetroPie project. I don't have an adapted xboxdrv script for Bstone, but i could probably share my xboxdrv configuration for my own Zeroplus PS4 controller from the Doom Legacy port.

You will have to install xboxdrv from RetroPie-Setup and know what buttons your X360 gamepad is using in order to get a proper working xboxdrv config for Bstone. You could then manually edit that specific config file that i created to get it to work with your X360 controller for Bstone. Let me know if you want this.

Until the Pi4 get's an official RetroPie release i can not help you any further than this.

What i can say is that i will probably get a Pi4 soon with the 4 gb RAM.

Sincerely

tomybyte

@tpo1990 it would be a pleasure if You can share Your xboxdrv script!
The Pi4 is a rocket! Your Return to Castle Wolfenstein run perfect smoothly! I love him ;)
Sincerely

tomybyte

@tpo1990 so this is a working xboxdrv configuration in my Blake Stone - Aliens of Gold.sh

#!/bin/bash
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
    --detach-kernel-driver \
    --silent \
    --force-feedback \
    --deadzone-trigger 15% \
    --deadzone 4000 \
    --mimic-xpad \
    --trigger-as-button \
    --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_RX=x2,ABS_RY=y2,ABS_Z=lt,ABS_RZ=rt \
    --ui-axismap X1=KEY_A:KEY_D,Y1=KEY_S:KEY_W,X2=KEY_A:KEY_D,Y2=KEY_UP:KEY_DOWN \
    --evdev-keymap BTN_SOUTH=a,BTN_EAST=b,BTN_NORTH=x,BTN_WEST=y,BTN_TL=lb,BTN_TR=rb,BTN_THUMBL=tl,BTN_THUMBR=tr,BTN_MODE=guide,BTN_SELECT=back,BTN_START=start,BTN_TRIGGER_HAPPY3=du,BTN_TRIGGER_HAPPY4=dd,BTN_TRIGGER_HAPPY1=dl,BTN_TRIGGER
_HAPPY2=dr \
    --evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \
    --ui-buttonmap du=KEY_W,dd=KEY_S,dl=KEY_LEFT,dr=KEY_RIGHT,a=KEY_LEFTCTRL,b=KEY_SPACE,y=KEY_Y,lb=KEY_A,rb=KEY_D,start=KEY_ENTER,x=KEY_ESC \
&
"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 _PORT_ "bstone" ""

The only problem is if I exit the game and go back to retropie interface the retropie controls are lost. Also if I kill the xboxdrv after game again with sudo killall > /dev/null 2>&1 xboxdrv

tpo1990

@tomybyte Good to hear that RTCW runs great on a Pi4. I haven't had any other tests other than on my Pi3B. :-)

It seems like you have already figured out the xboxdrv configuration. What is your xboxdrv configuration file called and where did you put it?

Xboxdrv should only start once a port or emulator is running on your RetroPie system and then after you exit that same port, it you should stop xboxdrv so than you can control as normal.

dudleydes

@tomybyte You can add to the killall command on a new line in your script.

Below is the script I use to launch Abuse in DOSBox using xboxdrv for mouse emulation:

#!/bin/bash
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv --config /opt/retropie/configs/xboxdrv/abuse.xboxdrv >/dev/null &
/opt/retropie/emulators/dosbox/bin/dosbox -c "mount c /home/pi/RetroPie/roms/pc-data" -c "c:" -c "cd ABUSE" -c "ABUSE.EXE" -c "exit" 
sudo killall >/dev/null xboxdrv
sleep 1

I'm not sure if the sleep 1 command is actually required but I keep it so that there's a one second delay between the xboxdrv process being stopped and ES launching and the two processes shouldn't coincide.

tomybyte

@tpo1990
If I start xboxdrv configuration upper the retropie menu does not work, because the retropie mappings are overwritten.
But with

sudo killall > /dev/null 2>&1

in the last line ALL xboxdrv processes will be killed.
Then the retropie menu also does not work any more.
I can not find a solution for that at the moment...

Sincerely

tpo1990

@tomybyte Did you try @dudleydes 's solution?

It should only be necessary to kill xboxdrv service and then the RetroPie mappings should work as normal again.

Let me check my stop command for xboxdrv and get back to you later.

tomybyte

Hi @tpo1990
so I found the solution for my Pi4...
To reuse xboxdrv You have to start it on boot:
RetroPie Setup > Configuration / Tools > xboxdrv - XBox / XBox360 gamepad driver > Enable xboxdrv
after that You have two configurations:
/opt/retropie/configs/all/retroarch-joypads
Xbox 360 Wireless Receiver (XBOX).cfg > with disabled xboxdrv
Xbox Gamepad (userspace driver).cfg > with enabled xboxdrv
Then You can kill it and start it again and again!

e.g. Blake Stone - Planet Strike.sh

#!/bin/bash
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv \
	--detach-kernel-driver \
	--silent \
	--force-feedback \
	--deadzone-trigger 15% \
	--deadzone 4000 \
	--mimic-xpad \
	--trigger-as-button \
	--evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_RX=x2,ABS_RY=y2,ABS_Z=lt,ABS_RZ=rt \
	--ui-axismap X1=KEY_A:KEY_D,Y1=KEY_S:KEY_W,X2=KEY_A:KEY_D,Y2=KEY_UP:KEY_DOWN \
	--evdev-keymap BTN_SOUTH=a,BTN_EAST=b,BTN_NORTH=x,BTN_WEST=y,BTN_TL=lb,BTN_TR=rb,BTN_THUMBL=tl,BTN_THUMBR=tr,BTN_MODE=guide,BTN_SELECT=back,BTN_START=start,BTN_TRIGGER_HAPPY3=du,BTN_TRIGGER_HAPPY4=dd,BTN_TRIGGER_HAPPY1=dl,BTN_TRIGGER_HAPPY2=dr \
	--evdev-absmap ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \
	--ui-buttonmap du=KEY_W,dd=KEY_S,dl=KEY_LEFT,dr=KEY_RIGHT,a=KEY_LEFTCTRL,b=KEY_SPACE,y=KEY_Y,lb=KEY_A,rb=KEY_D,start=KEY_ENTER,x=KEY_ESC \
&

"/opt/retropie/supplementary/runcommand/runcommand.sh" 0 _PORT_ "bstone_ps" ""
sudo killall > /dev/null 2>&1 xboxdrv
sudo /opt/retropie/supplementary/xboxdrv/bin/xboxdrv --daemon --detach --dbus disabled --detach-kernel-driver --id 0 --led 2 --deadzone 4000 --silent --trigger-as-button --next-controller --id 1 --led 3 --deadzone 4000 --silent --trigger-as-button

Sincerely