Theme for super CRT resolutions 1920 x 240

mitu

@NikooZ said in Theme for super CRT resolutions 1920 x 240:

But I don't know how to do that, I'm not sure if the emulators can change the system resolutions ?

You can use the runcommand scripting support to change resolution before and after the the emulator(s) run. Something like this.

NikooZ

Very useful, thanks, I will try that !

NikooZ

@mitu I tried the script, but it doesn't work... Maybe it was made for the RetroTink adapter, I personnally use a vga666 adapter, the parameters in the scrips doesn't seem to be the same...

mitu

You can use the resolution line in your config.txt (for the super-resolution) in the on-start scripts, replacing the values there (which might not fit the VGA666 adapter) and see if it works.

M3th0D

Gonna jump in on this thread as I want to do something similar.

My setup is an arcade monitor 15khz using a JPac and HDMI to VGA converter.

config:
hdmi_cvt=1920 240 60 1 1 0 0
hdmi_group=1
hdmi_mode=6

runcommand-onstart.sh:
tvservice -e "DMT 87" ; sleep 3 ; fbset -depth 8 ; fbset -depth 32; tvservice -s

runcommand-onend.sh
tvservice -e "CEA 6" ; sleep 3 ; fbset -depth 8 ; fbset -depth 32; tvservice -s

This gives 480i emulation station and 1920x240 in retroarch.
What Id like to do is have 320x240 in emulation station and 1920x240.

Unfortunately HDMI timing doesn't work with this setup. Is there a way to do it in the config?

NikooZ

@mitu That's what I did. Runcommand error log return an error on tvservice which could not activate the DMT 87 function. Seems logical, because my VGA adapter is on the GPIO ports, and TVservice seems to work only with HDMI ports. I looked on other forums, and it seems to be a problem linked to the Raspberry pi4 and tvservice which is not supported...

M3th0D

@NikooZ Im sure i remember reading that you use hdmi_timings for the vga666. Sorry I don't know that much about it.

NikooZ

@M3th0D Yes my VGA adapter for GPIO works with vga666 overlay

youxia

@NikooZ Retrotink is a very similar setup to GPIO, maybe overlay is different but we use the same runcommands. It should work for you, are you sure you did everything right?

I use Pi2SCART (GPIO, 666 overlay) and this is my runcommand-onstart:

#vcgencmd hdmi_timings 1920 1 24 192 184 240 1 4 5 14 0 0 0 60.0 0 36609600 1
tvservice -e "DMT 87"
fbset -depth 32 && fbset -depth 32 -xres 320 -yres 256

You can replace the values after hdmi_timings with your own hi-res ones. Just make sure you get rid of them in config.txt (put hdmi_timings 320 1 23 25 39 240 1 4 3 15 0 0 0 60 0 6400000 1 instead, they work on my generic Trinitron)

and runcommand-onend:

vcgencmd hdmi_timings 320 1 23 25 39 240 1 4 3 15 0 0 0 60 0 6400000 1
tvservice -e "DMT 87"
fbset -depth 8 && fbset -depth 16 -xres 320 -yres 240

Alternatively you can try to use this ready made images (download vga666 version): https://www.elotrolado.net/hilo_retropie-crt-edition-raspberry-pi-2b-3b-3b-tv-15khz-vga666-pi2scart-rgb-pi_2328132

@M3th0D there was a thread about using this adapter and settings for it recently, have a look around

M3th0D

@youxia I've had a good look around the forum but can't find what I'm looking for. It's ok if i use 480i but i have a decent 240p theme. I am having to play at 320x240 atm :/

NikooZ

@youxia Thank you ! I will try it !

NikooZ

@youxia That didn't work. The error log show me the same error as my previous tries :

[E] Failed to power on HDMI with explicit settings (DMT mode 87)
ioctl FBIOPUT_VSCREENINFO: Invalid argument
Parameters:
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-fbneo/fbneo_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/sfa3.zip" --appendconfig /dev/shm/retroarch.cfg
[CDROM] No sg devices found and sg kernel module is not loaded.
[E] Failed to power on HDMI with explicit settings (DMT mode 87)
ioctl FBIOPUT_VSCREENINFO: Invalid argument

mitu

@NikooZ what PI model do you have ?

NikooZ

@mitu Pi4

mitu

@NikooZ tvservice for resolution switching is not recommended anymore for the Pi4, due to the change in the GPU driver stack. Most likely any setups relying on it for dynamic resolution switching will encounter problems.

NikooZ

@mitu OK thanks. We have to wait for a solution, then !

Meanwhile, I can test these previous settings on a pi3b+, this will work ?

mitu

Meanwhile, I can test these previous settings on a pi3b+, this will work ?

Yes, they should work.

youxia

@M3th0D I don't really know much about this method (pun not intended :), you can have a look at these two threads, maybe you can salvage something from there. shmups.System11 is always a good place to ask about such stuff anyway:

https://shmups.system11.org/viewtopic.php?f=6&t=64797

http://forum.attractmode.org/index.php?topic=1324.0

M3th0D

I think the only way is to have something like:

CEA for emulationstation and DMT for retroarch. I can't figure out any other way :/

ohmycommodore

I don't think anyone really replied as to the best theme for this type of setup? What themes that work well?