Sega model 3 #segamodel3

myzar

@notthesame sorry i meant the legacy 3d engine in the emu itself , it has two engines you need to force -legacy3d in the command line, about the rpi4 video driver is the normal vc4-fkms-v3d over X

bronze

Guys any updated compiled file, the previous link has been removed?

RussellB

https://www.dropbox.com/s/imtj1f0c1ao5nf6/supermodel?dl=0

This was compiled on an RPi4 given the instructions in this thread. Get Bass was able to come up and play but there's major graphics issues with it.

mechafatnick

Edit:

Solved my own issues!

For me this was showing in a tiny window and wasn't registering any of the controls. To solve it I set the resolution to 640 x 480 in runcommand and have this in the emulators file:

supermodel = "XINIT:/opt/retropie/emulators/supermodel/bin/supermodel -game-xml-file=/opt/retropie/emulators/supermodel/bin/Config/Games.xml -legacy3d -sound-volume=50 -music-volume=60 -no-vsync -no-throttle -no-dsb -res=496,384 %ROM%"
default = "supermodel"

Though by default it looks in <bin folder>/Config, for me it was looking in <my user folder>/Config for its ini file. I moved the ini into a folder there and it was good to go (guess a sym link would have solved this too?)

Red_Trev

@mechafatnick hi there could you please do a step by step tutorial of how to get Supermodel installed & running on an existing copy of Retropie running on a Pi4 ? I have the 8GB version & want to see what its like, thanks !

mechafatnick

@red_trev said in Sega model 3 #segamodel3:

@mechafatnick hi there could you please do a step by step tutorial of how to get Supermodel installed & running on an existing copy of Retropie running on a Pi4 ? I have the 8GB version & want to see what its like, thanks !

I know this is going back a bit, but i've written one here: https://mechafatnick.co.uk/2021/06/13/becoming-a-super-model-adding-model-3-games-to-your-pi4/

Red_Trev

@mechafatnick awesome, thank you so much !

btw .... "Emulation Station configuration folder" download link is not working in the section for 'Adding Model3 as its own System in Emulation Station', could you please re-upload ?

Red_Trev

@mechafatnick hi there, have followed your instructions but games do not work, please confirm I have correct folder structure for .ini

here is new line added to arcade emulator text file:

here is emulator itself:

maybe its the ROMs ? should i check their contents with the Games XML file ?

DTEAM

@red_trev

Same setup and same problems. Here's my runcommand.log ------> Permission denied
the permission number is 644 for Game.xml and It should be 755 ... I think

Parameters: 
Executing: xinit /dev/shm/retropie_xinitrc -- vt1 -keeptty


X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
Build Operating System: Linux 5.10.17-v8+ aarch64 Raspbian
Current Operating System: Linux retropie 5.10.17-v7l+ #1403 SMP Mon Feb 22 11:33:35 GMT 2021 armv7l
Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:800x480M@59 smsc95xx.macaddr=DC:A6:32:09:3C:1B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  logo.nologo vt.global_cursor_default=0 quiet console=ttyS0,115200 console=tty3 root=PARTUUID=e22bcd10-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait loglevel=3 consoleblank=0 plymouth.enable=0
Build Date: 19 April 2021  03:23:36PM
xorg-server 2:1.20.4-1+rpt3+deb10u3 (https://www.debian.org/support) 
Current version of pixman: 0.36.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Mon Jun 14 17:01:44 2021
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
xrandr: cannot find mode 800x480
Set mode 800x480@59Hz on HDMI-1

Executing (via xinit): /opt/retropie/emulators/supermodel/bin/supermodel -game-xml-file=/opt/retropie/emulators/supermodel/bin/Config/Games.xml -legacy3d -sound-volume=50 -music-volume=60 -no-vsync -no-throttle -no-dsb -res=496,384 /home/pi/RetroPie/roms/model3/ecaj.zip

/dev/shm/retropie_xinitrc: line 6: /opt/retropie/emulators/supermodel/bin/supermodel: Permission denied
xinit: connection to X server lost

waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.

New edit:

It loads with this:

pi@retropie:~ $ chmod 755 -R /opt/retropie/emulators/supermodel/bin
pi@retropie:~ $ chmod 755 -R /home/pi/Config

But I have a message: cancelled - Network board not present, for some games (like Daytona2) but I found this https://www.supermodel3.com/FAQ.html#NetworkBoardError.

Spikeout run well. It runs at full speed on my Pi4. It's impressive. I have set my controller buttons, but I don't know how to exit the emulator with my gamepad yet. thanks @Myzar for this thread.

Red_Trev

@dteam thanks , i changed those permissions but still no luck, checking error log gives:

/opt/retropie/supplementary/runcommand/runcommand.sh line 1259: xinit: command not found

I tried sudo apt get install xorg, which installed about 97% of the items but threw an error for the last package, and sudo apt get install xinit, which threw an error right away & didnt install anything ....

tried to load a Supermodel game again & same error in log : xinit: command not found

DTEAM

@red_trev

Red_Trev about 5 hours ago
@dteam thanks , i changed those permissions but still no luck, checking error log gives:

/opt/retropie/supplementary/runcommand/runcommand.sh line 1259: xinit: command not found

I tried sudo apt get install xorg, which installed about 97% of the items but threw an error for the last package, and sudo apt get install xinit, which threw an error right away & didnt install anything ....

tried to load a Supermodel game again & same error in log : xinit: command not found

I don't know that much about Xinit. Probably @mitu know what to do.

I’ll take a look on that today.

mitu

@dteam said in Sega model 3 #segamodel3:

I don't know that much about Xinit. Probably @mitu know what to do.

xinit is in the xinit package, but installing xorg should install xinit as a dependency.

/dev/shm/retropie_xinitrc: line 6: /opt/retropie/emulators/supermodel/bin/supermodel: Permission denied

This looks like the file is not executable by the running user. Check that the executable bit is set on the file with ls -l /opt/retropie/emulators/supermodel/bin/supermodel.

DTEAM

@mitu
Finally, ~~we don't need /home/pi/Config folder~~ You need It . It's just a permission problem. It's a good emulator and It runs well on Pi4. I'm trying to found a way to exit it without a keyboard.I haven't found anything yet.

DTEAM

@mitu said in Sega model 3 #segamodel3:

Check that the executable bit is set on the file with ls -l

I confirm, It was the problem , In my new edit above, I have use .

pi@retropie:~ $ chmod 755 -R /opt/retropie/emulators/supermodel/bin

To fix that.

Red_Trev

@dteam i gave permissions to all those files just incase, ill remove the extra Config folder once im up & running :

@mitu please confirm the correct command line argument to install Xorg & any dependency's, is the below whats needed ? :

sudo apt-get install xorg --install-suggests

mitu

@red_trev said in Sega model 3 #segamodel3:

@mitu please confirm the correct command line argument to install Xorg & any dependency's, is the below whats needed ? :

sudo apt install xorg should be enough.

DTEAM

The official source is here https://www.supermodel3.com/Download.html

They give the source code "Supermodel Version 0.2a source code" . You have the readme.txt file with informations about the emulator.

They talk about gamepads setup (we can't modify the Esc button... for now) and they give the game compatibility matrix.

Red_Trev

@mitu said in Sega model 3 #segamodel3:

@red_trev said in Sega model 3 #segamodel3:

@mitu please confirm the correct command line argument to install Xorg & any dependency's, is the below whats needed ? :

sudo apt install xorg should be enough.

same issue as before, it fetches 97%, hangs, then fails (excuse the poor screenshot)

error says : "Temporary failure resolving 'raspbian.raspberrypi.org'"

although i can hit it via web browser, so it is not offline: http://raspbian.raspberrypi.org/

to add, when i navigate to the URL in the error message (http://raspbian.raspberrypi.org/raspbian/pool/main/x/xterm/) the file its looking for (xterm_344-1_armhf.deb) is not listed .... also http://raspbian.raspberrypi.org/raspbian buster/ does not exist

is there any other way i can install via command line ?

DTEAM

@red_trev said in Sega model 3 #segamodel3:

ill remove the extra Config folde

Finally, you need It to use your gamepad setting. It could be a symbolic link with /opt/retropie/emulators/supermodel/bin/Config/Supermodel.ini

mkdir  /home/pi/Config
ln -s /opt/retropie/emulators/supermodel/bin/Config/Supermodel.ini /home/pi/Config/Supermodel.ini

mitu

@red_trev said in Sega model 3 #segamodel3:

error says : "Temporary failure resolving 'raspbian.raspberrypi.org'"

This looks like an interrupted network connection. Run sudo apt update before and make sure it completes, then try installing the package(s) again.