Diablo 1 ported to PI

ExarKunIv

@ecto so it changed again, lol. yes getting it to use master would be better, but even when i ask them on github a few months back i was told to do it the same way you found.
just at the time it was a version 1.1.0.

i think for now this is what we need to do.

MumboJumbo

@exarkuniv i just updatet to version 1.3 they only have a zip and prebuild deb on their seit for pi but i changed your script a little and it works so far i can say. I started the game and walked around a bit.
Here's the script of yours with some changes

#!/usr/bin/env bash

# This file is part of The RetroPie Project
# 
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
# 
# See the LICENSE.md file at the top-level directory of this distribution and 
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

rp_module_id="devilutionx"
rp_module_desc="devilutionx - Diablo Engine"
rp_module_licence="https://raw.githubusercontent.com/diasurgical/devilutionX/master/LICENSE"
rp_module_help="Copy your original diabdat.mpq file from Diablo to $romdir/ports/devilutionx."
rp_module_section="exp"
rp_module_flags="!x86 !mali"

function depends_devilutionx() {
    echo 42
}

function sources_devilutionx() {
     wget https://github.com/diasurgical/devilutionX/releases/download/1.3.0/devilutionx-linux-armhf.zip
     unzip devilutionx-linux-armhf.zip
     }

function install_devilutionx() {
  cd devilutionx-linux-armhf
dpkg -i ./devilutionx_1.3.0_armhf.deb
    md_ret_files=(
          	devilutionx-linux-armhf/devilutionx
		devilutionx-linux-armhf/devilutionx.mpq
		devilutionx-linux-armhf/README.txt 
		devilutionx-linux-armhf/LICENSE.CC-BY.txt
		devilutionx-linux-armhf/LICENSE.OFL.txt)
}

function configure_devilutionx() {
    mkRomDir "ports"
    mkRomDir "ports/devilutionx"
    cp -r "$md_inst/devilutionx.mpq" "$romdir/ports/$md_id"
    addPort "$md_id" "devilutionx" "devilutionx - Diablo Engine" "$md_inst/devilutionx --data-dir $romdir/ports/devilutionx --save-dir $md_conf_root/devilutionx"
}

ExarKunIv

@mumbojumbo i will update on my end. thanks

Addison

Is 1.4.0 the most updated source to be used?

It's the only release that's showing linux-armhf.7z to be available.

Trying to use the following guide for setup:
https://github.com/diasurgical/devilutionX/wiki/Retropie-Guide

ExarKunIv

@Addison yes that's the last version that they released with linux-armhf.7z

i updated the script to that version

Addison

Thanks!

Was hoping to get this to run today. :)

ExarKunIv

@Addison at some point ill look to see if i can compile a newer version

Addison

Ended up with a black screen for a few seconds then a return to Emulation Station.

---------------
2023-10-06T19:02:22-0400: started sync for 
2023-10-06T19:02:22-0400: starting download...
2023-10-06T19:02:22-0400: command = /home/pi/rclone-v1.56.0-linux-arm/rclone copy remote:/ /home/pi/RetroPie/saves/ --include ".*" --log-level "INFO" --log-file /home/pi/log.txt
2023/10/06 19:02:23 INFO  : There was nothing to transfer
2023/10/06 19:02:23 INFO  : 
Transferred:   	          0 / 0 Byte, -, 0 Byte/s, ETA -
Elapsed time:         0.9s

2023-10-06T19:02:23-0400: finished sync for 
---------------
2023-10-06T19:02:26-0400: started sync for 
2023-10-06T19:02:26-0400: starting upload...
2023-10-06T19:02:26-0400: command = /home/pi/rclone-v1.56.0-linux-arm/rclone copy /home/pi/RetroPie/saves/ remote:/ --include ".*" --log-level "INFO" --log-file /home/pi/log.txt
2023/10/06 19:02:36 INFO  : There was nothing to transfer
2023/10/06 19:02:36 INFO  : 
Transferred:   	          0 / 0 Byte, -, 0 Byte/s, ETA -
Elapsed time:         9.1s

2023-10-06T19:02:36-0400: finished sync for

That was all that showed in the log file.

Have I somehow misplaced where the required files need to be?

alt text

Also, no diablo.ini was generated in /home/pi/RetroPie/roms/ports/diablo/gamedata

ExarKunIv

@Addison the ini file won't be generated yet

As far as the rest of it I don't know. I'll have to try it tomorrow and see what I get

If you always want you can edit the script file and change 1.4 to 1.3 and it still should work like before.

It's possible I tried that version and it didn't work.
I don't remember.n

Addison

Thank you.

1.3.0 is working. :D

ExarKunIv

@Addison awesome.

I will take a look as see what's up with 1.4

ExarKunIv

@Addison so version 1.4 and up need libfmt 7 or higher
Buster only has version 5.2.1.
so that's why it doesn't work

im looking into what can be done, if anything

Addison

@ExarKunIv

Think you might be able to get all the way up to 1.5.1?

ExarKunIv

@Addison I hoping so.

Right now I get half way in compiling and it errors out.
The problem is that we need gcc 10.1 or higher since there is something included in that. That we need to compile.

But buster only have 8.3.
I'm looking onto how to bring it up. But it might or might not break something else within Retropie when someone tries to build something else

But one thing at a time, right

ExarKunIv

@Addison DevilutionX is now running at 1.5.1.

you will need to update the script and reinstall.
it does take a few min since you will not be compiling it from source

Addison

I chose Update RetroPie-Setup script.

Then did a full Update.

Then Manage packages

Manage experimental packages

devilutionx

Install from source

Somehow I think I did that all wrong. lol

sleve_mcdichael

@Addison said in Diablo 1 ported to PI:

I chose Update RetroPie-Setup script.

Then did a full Update.

This doesn't touch the RetroPie-Extra scripts which exist outside of RetroPie-proper.

You need to:

cd

cd RetroPie-Extra

./update-extras.sh

./install-extras.sh

Select choose which modules to install.

All of the currently-installed RetroPie-Extra modules will be pre-selected. Just choose OK to reinstall the latest scripts for the selected modules.

This only "installs" them into the RetroPie-Setup script. You still need to go into the setup script and actually install the game to your system (the part what you did before with manage packages.)

Addison

Thanks!

Addison

Seems like I'm missing a file. :/

pi@retropie:~ $ cd RetroPie-Extra
pi@retropie:~/RetroPie-Extra $ ./update-extras.sh
-bash: ./update-extras.sh: No such file or directory
pi@retropie:~/RetroPie-Extra $ dir
install-extras.sh  LICENSE  README.md  scriptmodules  TODO.md

sleve_mcdichael

@Addison said in Diablo 1 ported to PI:

Seems like I'm missing a file. :/

I think you still have the old Extra repo. You tried to fix this once before, and wound up here by updating from the wrong directory. You changed the origin URL for the Setup repo when you meant to do it for the Extra repo.

https://retropie.org.uk/forum/topic/34617/update-failed-solved

Try:

cd ~/RetroPie-Extra
git remote set-url origin https://github.com/Exarkuniv/RetroPie-Extra
git fetch --all
git reset --hard master

Make sure you run the git commands from in RetroPie-Extra, not RetroPie-Setup.

Alternatively, just wipe out the Extra directory and re-clone it from the correct URL:

cd
rm -rf RetroPie-Extra
git clone https://github.com/Exarkuniv/RetroPie-Extra

...or, backup the directory instead of wiping it:

cd
mv RetroPie-Extra RetroPie-Extra.old
git clone https://github.com/Exarkuniv/RetroPie-Extra