Best way to play HDMI Or Composite?

Capeman

@eldrethor And not only that, the zune specific cable is dead sexy! its probably the nicest looking AV cable i've ever used and the cable is very flexible, i was very impressed.

InsecureSpike

@capeman said in Best way to play HDMI Or Composite?:

@eldrethor And not only that, the zune specific cable is dead sexy! its probably the nicest looking AV cable i've ever used and the cable is very flexible, i was very impressed.

hey, do you have any links for the zune cable?
thanks

Capeman

Everything can be had on ebay
https://www.ebay.com/i/182653454444?chn=ps&dispItem=1

InsecureSpike

@capeman said in Best way to play HDMI Or Composite?:

Everything can be had on ebay
https://www.ebay.com/i/182653454444?chn=ps&dispItem=1

that's awesome, thanks lots

drake999

@retrofreak89 If you want the authentic experience for console generations 2 through 5, you will want a CRT TV with composite video. This will reproduce the look and feel of the games pretty much as they were back in the 80's and 90's. If you favor a crisp picture over nostalgia, then HDMI is the best way to go. It really comes down to preference. I've always used HDMI, but I'm starting to see the appeal of the authentic experience.

Rion

@drake999 I would recommend

RetroTINK-S, RetroTINK-C and RetroTINK-RGB

Or

Pi2Scart

over composite any day.

drake999

@rion I wasn't aware of that things existence but yes the S-Video option would be a better choice than composite for sure. Probably a good choice to use this board if you are building an arcade cabinet to.

sirhenrythe5th

Just for interest as far as original Arcade cabinets are concerned:
Were those Crts in the cabinets also connected to the pcbs/system boards with RGB or S-Video?

Its a long time ago that i saw the original cabinets as a kid, but i have got the Impression that this picture, that i have with my Pi simply connected to the CRT with composite, seems to be close to the original.
I remember that the shadows of sprites were flickering and the picture was kind of blurry.
I liked it! 😊

So has there been a high-quality-technoligy in the cabinets, or are we going further away from the genuine experience by boosting up the picture with S- Video or RGB?

DorkVonWaterfall

@sirhenrythe5th

RGB, 15 kHz, 320x240

sirhenrythe5th

@dorkvonwaterfall thx for Info!

RetroRay

I use my retropie build on my sony BVM CRT with a vga hat connected with a vga to bnc cable. You could also use an old VGA CRT PC monitor (you could find one pretty cheap on ebay). it looks awesome! scanlines an all. I don't think I could ever play 16 bit or 8 bit emulated games on an HD tv. It just looks gross in comparison i think. I was thinking about picking one of these up. although alittle pricey it would make it super easy to get the best picture quality on any U.S. manufactured CRT TV, Since most consumer grade CRT's in the U.S. never adopted SCART. Although I haven't tested myself the pi2scart or RGB-Pi seem like nice solutions if you have a scart connection on your crt.

ohmycommodore

@dorkvonwaterfall I assume by RGB you mean what we used to call in the TV biz "component"? The three separate cables for R and B and G? If the original cabinets were indeed hooked up that way, then additional hardware that enables RGB certainly becomes more interesting.

sirhenrythe5th

And furthermore: did really ALL cabinets use RGB?
I read a documentary about Atari recently and they wrote that Nolan Bushnell hired Marihuana smoking Hippies at the start to dissamble cheap Radio-Shack Televisions which were used for their Arcade games.
Also RGB? 🤔

davej

@sirhenrythe5th Keep in mind that all colour CRT picture tubes are driven by separate RGB signals going to the electron guns. TVs decode a composite signal into separate RGB signals before amplifying them and passing them onto the electron guns. Given the technology of 1970's TVs, it would be relatively easy to modify a TV to accept your own RGB signal rather than use the one it generates from a composite one.