Trackball working in mame4all but not Advmame??

space invader

Well, continue trying and with Millipede I have the same problem.

Only player one's trackball works for both players. Is as if games that players plays separately can only be controlled with player one's controlers, but then I don't understand why in the TAB menú appear player two's controls and they do not work, even the keyboard ones...

BuZz

The original arcade game only has and supports one trackball.

space invader

Then this would be the reason, but as i saw in the TAB menú player one's and two's spinner configurations...

Thanks!

BuZz

maybe because the hardware supports more than one controller.

space invader

I've been searching in google images of he Arkanoid's CPO and all of them have only one spinner, so I asume that the game does not support the second one.

So I will not worry anymore about it, one less mouse to buy...

caver01

I have seen this too. Some games, no matter what you try, want to use the single control.

A game like Golden Tee for example supports 4 players, but they all take turns using the single trackball. That makes sense because they take turns. For games with simultaneous control, like Rampart (multiple trackballs), or Blasteroids (multiple spinners) you can usually get them working fine on separate controls.

Also, the MAME gui allows some adjustment (analog input) but I have never had luck choosing inputs--they need to be mapped first in the .rc file. Then, use the gui to adjust sensitivity.

Finally, once I have the analog controls working the way I want, I always go into the gui menu and remove the joy + - inputs so guests don't accidentally use the joystick by mistake.

By the way, you can do some amazing putting with a spinner on Golden Tee! ;-)

Abqshark

I'm sorry if this is a noob question, but where do I find the advmame.rc file to edit it?

caver01

@Abqshark I always connect via samba share to the configs, but the .rc file I edit for advmame 1.4 is /opt/retropie/configs/mame-advancemame/advmame-1.4.rc

dsstrainer

@Roberto Did you have to do anything to get it working with mame4all?

buggydad

My trackball (X-Arcade Tankstick) worked natively in mame4all but not in Advmame even after making the changes recommended above. My spinner (Turbo Twist 2) also worked natively in mame4all but not Advmame.

Big problem I'm having is getting the spinner working in Tron. It's working in Tempest but in Tron, I hit TAB for the configuration menu and can't get the spinner to register in the DIAL settings. Appreciate any tips or thoughts as I really want to get Tron and DOT working!

dsstrainer

@buggydad Yea I think it is ok for me too in mame4all. Haven't tried a trackball game yet. AdvMame appears to be gone now in RetroPi 4.0 so I guess lib-retro is the new hotness

hakan1708

@buggydad I thought that spinner doesn't work in mame4all. How did you make it work? Thanks.

buggydad

@hakan1708 Spinner (Turbo Twist 2) worked out of the gate in mame4all on the games I tested (Super Sprint and Tempest). I'm using RetroPie 4.0 on a Raspberry 2. Can't seem to get it recognized in Tron or Discs of Tron, though. Anyone have any luck with that?

hakan1708

@buggydad Thanks. I'll try.

caver01

Advmame is still there. Just not installed by default.

I have been able to make spinners and trackballs work fine with any applicable game that can be launched with AdvMAME. I am happy to assist with your config. Have you read the Wiki I wrote since this original thread was started? There are several tests you can do to ensure AdvMAME is seeing the input from your device.

It sounds like at least Linux is seeing it. I expect you merely need to configure your .rc file correctly for AdvanceMAME. The details are in the wiki, but you should be able to run the advm utility and quickly determine how AdvanceMAME is indexing your mouse device, then use that info to configure the DIAL inputs. You will need to know which mouse# and which axis. Depending on how you connected your TurboTwist 2 to the USB interface, you may just need to configure the correct axis. AdvanceMAME can be more complex (and more capable) than lr cores because it can see up to 4 different mouse devices at the same time, and this matters because you have to setup the right ones in the .rc file (or map them all).

caver01

Oh and by the way, gameplay will be limited in Discs Of Tron if your spinner isn't a "push-pull". Not everyone knows about this. In fact, when I was a kid playing DOT, I didn't even realize this was an option while playing, but on the actual arcade panel, you can lift the spinner and push it down and it will raise and lower the aim point of your discs--in addition to spinning it. The spinner in DOT is unique in that regard. Your typical TurboTwist 2 just spins and doesn't have this push/pull switch (although you can get one that does). Anyway, DOT is still fun without it.

caver01

One more note--you might be thinking why bother with AdvanceMAME, but you might reconsider when you see how much better vector titles look in AdvanceMAME at your display's native resolution than they do at a jaggy 640x480 in the lr cores. Check out this thread and compare the first image to the second image. Games like Tempest and Omega Race will look fantastic in AdvanceMAME.

hakan1708

@caver01 Awesome. I'll definitely check your wiki page. Thanks for putting it all on wiki. Yeah, I don't like the way games look on lr 2003.

caver01

@hakan1708 said in Trackball working in mame4all but not Advmame??:

@caver01 I don't like the way games look on lr 2003.

Interesting. The way games look on lr-mame2003 is the reason why I choose it as my default emu for arcade games. While I also use AdvanceMAME (and once upon a time it was my stadard on another SD card), once I discovered how well (and how fast) the PI-CRT libretro shaders work, I am totally committed to using lr cores whenever possible, especially given all of the commits by @dankcushions--2003 is the best combination of capabilities on RetroPie. There are a handful of titles that still require AdvanceMAME (mainly just vector games now that 2003 supports mouse input).

What don't you like about how 2003 looks? Or are we talking vector games?

buggydad

@caver01 Thanks for the reply. I will try your suggestions this weekend. I really appreciate your time and assistance. As far as DoT is concerned, I have two buttons within reach of my spinner which allow me to control up and down. It's not perfect but it worked well enough the few times I've made it that far in the game (back when I had MAME running on an old PC before switching to RetroPie).