Mausberry Shutdown Script Doesn't Save Metadata

hansolo77

That's really confusing... :(

cyperghost

@hansolo77 What is confusing you? The /opt/retropie/supplementary/emulationstation/emulationstation.sh was not coded by me. You will find it in your current setup. But this script is responsible for proper restart, reboot und shutdown of ES.

EDIT: removed bash....Use this instead > v1.2

hansolo77

OK that I can test. :)

So if I understand, I want to do a kill of the process and not "all"? What about the wait bit? Will that work? The problem I saw was that it ignored it, and just continued on with the poweroff.

cyperghost

@hansolo77
You can even remove the sudo poweroff in your script. ES does this for you!
But I don't know if you are using the Pie also for Kodi or any other programm so if you press Power Off nothing will happen. Try it out and report :)

In short: you can remove sudo poweroffin your script and then the gamelist will be saved 100% . But then your shutdown-button works only in ES.

about the wait signal
you can try
pkill -f "/opt/retropie/supplementary/.*/emulationstation([^.]|$)" && wait

But test step by step. If nothing helps then remove sudo poweroff from the GPIO shutdown script and let ES do the proper shutdown for you

hansolo77

How does ES power off? I've never seen it do that before.. I've been able to have it do a restart of ES, a reboot of the Pi, and do a shut down. But when I do the shutdown, it just kills everything running but leaves the power running. The script, provided by Mausberry, tells the circuit everything is off then disconnects the power. As long as I've had the circuit, I've never had it completely cut power when I do a shutdown from within ES.

cyperghost

@cyperghost said in Mausberry Shutdown Script Doesn't Save Metadata:

"/opt/retropie/supplementary/.*/emulationstation([^.]|$)"

ES Powers Off through it's script emulationstation.sh

I've done a small rework to your gpio-poweroff script!
I remarked the changes I made now it should work 100% and you can always use PowerOff button! I've just tested my written part. That worked as I was logged in as user pi - I hope there are no restrictions to file system.

@meleu Is coding style better now?

#!/bin/bash

#this is the GPIO pin connected to the lead on switch labeled OUT
GPIOpin1=23

#this is the GPIO pin connected to the lead on switch labeled IN
GPIOpin2=24

echo "$GPIOpin1" > /sys/class/gpio/export
echo "in" > /sys/class/gpio/gpio$GPIOpin1/direction
echo "$GPIOpin2" > /sys/class/gpio/export
echo "out" > /sys/class/gpio/gpio$GPIOpin2/direction
echo "1" > /sys/class/gpio/gpio$GPIOpin2/value
while [ 1 = 1 ]; do
power=$(cat /sys/class/gpio/gpio$GPIOpin1/value)
if [ $power = 0 ]; then
sleep 1
else

# End Emulationstation if condition of running binary is true (not tested!)
# v1 07/21/17 by cyperghost - Inital run 
# v1.1 07/22/17 - Added chown command to set right user permission for creating es-shutdown
espid=$( pgrep -f "/opt/retropie/supplementary/.*/emulationstation([^.]|$)" ) # PID of binary only
if [ "$espid" ]; then                                                         # Condition: PID is not equal 0 or empty then use ES shutdown
   echo "ES binary is running - I'm using ES internal shutdown"
   touch /tmp/es-shutdown && chown pi:pi /tmp/es-shutdown                     #v1.1 Change file permission of es-shutdown to user:group pi:pi
   pkill -f "/opt/retropie/supplementary/.*/emulationstation([^.]|$)"
   exit
else
   echo "ES binary is closed - I proceed with usual shutdown"
fi
# End Emulationstation if condition of running binary is true (not tested!)

wait
sudo poweroff
fi
done

hansolo77

~~I'm home from work now, so I will test this asap!~~

Didn't work. I see in the code you have it doing an echo. That should mean in either case it will display a line indicating which method it is shutting down right? All I'm getting on my screen is:

rm: cannot remove "/tmp/es-shutdown": Operation not permitted

It does shutudown though, and it looks like it's saving the metadata now. I checked my Last Played before, started a game, checked a game and saw a new "most recent". I then did the shutdown (via the power button). When I booted back up, the "most recent" is now there. Now if I can only figure out how to get that "error" gone. Perhaps a sudu?

hansolo77

I'm trying to figure this out on my own.. here's what I've figured out by looking at the scripts...

The script located at:

/opt/retropie/supplementary/emulationstation.sh

Is doing nothing more than watching the /tmp/ folder for the creation of either "es-restart", "es_sysrestart", or "es_shutdown". At that point, it erases that file then does either a sudo reboot or a sudo poweroff depending on the file it detects. I don't understand why we would be calling this script from the switch script. I mean, the new additions you give the script seem to me like we're identifying the PID (process ID) of ES, then create the "es-shutdown" file for the other script to initiate the shutdown. Then you have a pkill in there, which would make sense, but it looks like (based on the error I get on the screen) the other script is initiating the shutdown, not the switch script. I'm also not sure why you have the path with a .* in it. Isn't that path redundant?

opt/retropie/supplementary/.*/emulationstation

I know I'm a total newb to this, but I'm trying to understand...

hansolo77

OK I went back and re-read your initial suggestion @cyperghost, now that I've explored a little more into this. If there is indeed a way to have ES shut down internally prior to initiating the poweroff, that's the best way to do it. But I don't see a method via the emulationstation.sh script to just exit ES. There are only keys to reboot and shutdown. Am I missing something? It looks like all I need is the command to exit ES.

cyperghost

@hansolo77

rm: cannot remove "/tmp/es-shutdown": Operation not permitted

Ah... this is caused by your GPIO script seems to be runnig as user "ROOT"
So the file es-shutdown is also created by user "ROOT" and can't removed by USER "Pi" which the ES-process belongs to ;)

There is a solution! So I told you:

cyperghost wrote: That worked as I was logged in as user pi - I hope there are no restrictions to file system.

Now if I can only figure out how to get that "error" gone. Perhaps a sudu

Out of the error please add touch /tmp/es-shutdown && chown pi:pi /tmp/es-shutdown instead of only touch /tmp/es-shutdown. Pleaso don't mess around with sudo. The process of your script runs already under root, so there is no need to sudo again.

The error you've posted is a permission error caused by user root, now we change the file to permit user pi ;)

I updated the script posted above, so it should work for all processes now. Can you please test and tell me?

I see in the code you have it doing an echo. That should mean in either case it will display a line indicating which method it is shutting down right? All I'm getting on my screen is

That's just for troubleshooting and indicating, you can remove or comment the lines with # if it works as you want. I still left the else branch for you (it's a useless code piece for now), maybe you need it for a future condition.

I'm also not sure why you have the path with a .* in it. Isn't that path redundant?
opt/retropie/supplementary/.*/emulationstation
I know I'm a total newb to this, but I'm trying to understand...

That's for indicating the binary process and other emulationstations-binaries like emulationstation_kidsmode, emulationstation_powersaver.... without the * you would just kill the ordinary binary emulationstation not more not less. @Buzz and @meleu did a nice job in creating this script. I also appreciate the help of some guys here in the forum so there is no intentention te be called a noob - rookie sounds better :)

here are only keys to reboot and shutdown. Am I missing something? It looks like all I need is the command to exit ES.

To exit ES: It's an internal c++ command. I never needed to exit ES becasue I always log in via SSH if I need a terminal. So I can't give correct answer here how ES can be proper quitted - maybe via killall emulationstation?

As I told you... use the chwon command to change user rights of created file and I've updated the bash script and commented it.

EDIT - the script should work so far but there is space for doing some code optimizings:

I think you can remove waitcommand you initiated because I made an exit and give shutdown control back to ES (but only if binary PID was detected! If the ES binary is not detected the GPIO script runs as usual)
If you want you can remove complete else branch (don't remove fi command!)
you can remove or comment my two echo commands to give if-condition out to screen - it can be used for bug hunting

hansolo77

I almost posted a big grin, until I restarted... The script now displays just one word on the screen when I hit the power button:

Terminated

But when the system came back up, my Last Played collection hadn't saved the most recent game I played. So I think we're back to square one again. :(

pjft

@hansolo77 Just to make sure we're looking at the right part of the problem, what's the result of running ls -lon the folder of the gamelist that should contain the game you last played?

Does the date and time of the file match the time when you rebooted? What's the current date and time of that file?

hansolo77

The date and time didn't update... I just played a game right before testing 10 minutes ago, I see this:

pi@retropie:~ $ ls -l /opt/retropie/configs/all/emulationstation/gamelists/megadrive/
total 1560
-rw-r--r-- 1 pi pi 1594754 Jul 21 01:26 gamelist.xml

pjft

Got it.

So we're looking at the right end of the problem: it's not saving the metadata.

Also, do you have "Save Metadata on Exit" turned on?

Just wanted to check you're not chasing something from the wrong end.

hansolo77

Yeah.. I've never changed it. Just double checked too... I did, however, launch the game via the Favorites collection rather than from the actual system menu.. gonna test that now.

EDIT - Seems like it liked it ok when I ran it from the system menu.. Gonna further test..

pjft

That shouldn't have any effect, to be honest.

hansolo77

LOL WTF...

Now it's working. I tested a different system from my Favorites, exited back to ES then powered off. That most recent game is now at the top of the Last Played list. Go figure. Maybe it just need to go through a complete "reboot" cycle after editing the script? I've also noticed that the Terminated indicator on the screen has gone away.

pjft

I'm thinking that whatever solution you have going on there at the moment is not reliable enough. :)

cyperghost

@pjft I think there was a problem with file permission.
But that should be solved via chmod.

@hansolo77 Can the topic marked as solved? Are there any issues? Can you please post your GPIO script?

hansolo77

I don't want to mark it as solved until I've done further testing. I'd like to see if it still saves if I'm playing a game and shut it down before returning to ES (probably won't, so the script might need updated). I also want to test to see if it saves after I play a game then let the screensaver run for a bit and shutdown during the screensaver. For now, the testing via direct system menu and via the Favorites menu seems to be working. I'm running out for a few hours so I won't be able to test again for some time. But fingers are crossed.

Here's the script as it is right now:

/etc/switch.sh

#!/bin/bash

#this is the GPIO pin connected to the lead on switch labeled OUT
GPIOpin1=23

#this is the GPIO pin connected to the lead on switch labeled IN
GPIOpin2=24

echo "$GPIOpin1" > /sys/class/gpio/export
echo "in" > /sys/class/gpio/gpio$GPIOpin1/direction
echo "$GPIOpin2" > /sys/class/gpio/export
echo "out" > /sys/class/gpio/gpio$GPIOpin2/direction
echo "1" > /sys/class/gpio/gpio$GPIOpin2/value
while [ 1 = 1 ]; do
power=$(cat /sys/class/gpio/gpio$GPIOpin1/value)
if [ $power = 0 ]; then
sleep 1
else

# End Emulationstation if condition of running binary is true (not tested!)
# v1 07/21/17 by cyperghost - Inital run 
# v1.1 07/22/17 - Added chown command to set right user permission for creating es-shutdown
espid=$( pgrep -f "/opt/retropie/supplementary/.*/emulationstation([^.]|$)" ) # PID of binary only
if [ "$espid" ]; then                                                         # Condition: PID is not equal 0 or empty then use ES shutdown
   echo "ES binary is running - I'm using ES internal shutdown"
   touch /tmp/es-shutdown && chown pi:pi /tmp/es-shutdown                     #v1.1 Change file permission of es-shutdown to user:group pi:pi
   pkill -f "/opt/retropie/supplementary/.*/emulationstation([^.]|$)"
   exit
else
   echo "ES binary is closed - I proceed with usual shutdown"
fi
# End Emulationstation if condition of running binary is true (not tested!)

sudo poweroff
fi
done