Mausberry Shutdown Script Doesn't Save Metadata

hansolo77

OK, further "looking around"... the original script (v1.2) wasn't working either. So I went back to the unedited v0.0 (the one Mausberry has you install). That one didn't work either! So I checked out the install script, and saw they're adding a line to rc.local. I'm not sure what that file is, but when I edited it, it had 2 instances of the script path /etc/switch.sh in there. I took one out and rebooted. Now the original script is working right. Gonna try putting in the new changes and see if that was my problem.

EDIT Still a no-go on that 1.3 edit. :(

EDIT 2 Facepalm - I think it might be a file properties issue now... I rechecked the Mausberry install script and noticed they're doing a chmod +777 on the script prior to rebooting. Since I already had a working script, I moved it to a backup file before making changes. I saved the changes to a new file and renamed it to be what it should be. But I suspect the +777 isn't there. So I added that bit in the terminal and just rebooted. The system now shuts down correctly (using the 1.2 script). Now testing 1.3.

EDIT 3 Ha! That was the trick. But it's not saving the metadata. It might be that it's not giving it enough time to return to ES before cutting the power... When I hit the button, it turns off the emulator, and I see the RunCommand box (haven't set up the launching images yet). At the bottom of the screen there is a line that says "Terminated", then the system turns off..

EDIT 4 I don't think this script in it's current form works well. I tried adding a second to the sleep timer. Then tried to test the script just as is before actually launching a game. The script launches, but the system never shuts down. ES closes, but that's it. I don't know if it's getting hung up on the sleep or what. But the only way I can recover is by pulling the plug. With the 2 added (v1.3) lines # commented out, the system fully powers down again. I think there needs to be additional lines of code to include an if/then/else. IF emulator is running, THEN kill and wait, ELSE shutdown ES. But will that even execute if an emulator isn't running? Would it need to read out as "IF emulator, THEN kill emulator and wait, THEN kill ES.. ELSE kill ES"?

PS - I'm done for the night. :)

cyperghost

So I think it we should provide and maintain v1.2 only!
Get the version for Mausberry circuits shutdowns from here

Thank @hansolo77 for testing this
This script will properly shutdown ES and saves it's metadata if you press power button on your mausberry circuit!

Metadata is needed to save scraped games, favorites and last played record upon next reboot
This script will work if your are in EmulationsStation
This script will not properly save metadata if you shutdown during gameplay or if your RPi is locked (So return to ES by pressing start+select on your gampad and then shutdown!)

# End Emulationstation if condition of running binary is true
# v1.0 07/21/17 by cyperghost - Inital run 
# v1.1 07/22/17 - Added chown command to set right user permission for creating es-shutdown
# v1.2 07/23/17 - Some small improvments, easier to maintain, removed echo, removed else branch 
# greetings @pjft for his famous favorits and @meleu for the RegEx sniplet 
espid=$( pgrep -f "/opt/retropie/supplementary/.*/emulationstation([^.]|$)" ) # detect PID of ES binary only
if [ "$espid" ]; then                                                         # Condition: PID is not equal 0 or empty then use ES shutdown
   touch /tmp/es-shutdown && chown pi:pi /tmp/es-shutdown                     #v1.1 Change file permission of es-shutdown to user:group pi:pi
   kill $espid                                                                #v1.2 use kill@detected PID - easier to maintain now!
   exit
fi
# End Emulationstation if condition of running binary is true

cyperghost

EXPERIMENTAL!!!

Converted from @meleu to kill all emulators
It worked (saved recently used games) for me in SSH but I've no chance to test >> lack of mausberry!

# End Emulationstation if condition of running binary is true (Shotgun-version - no support!)
# v1.0 07/21/17 by cyperghost - Inital run 
# v1.1 07/22/17 - Added chown command to set right user permission for creating es-shutdown
# v1.2 07/23/17 - Some small improvments, easier to maintain, removed echo, removed else branch 
# v1.4 07/25/17 - Shotgun method to terminate all launchs by runcommand (not maintained, use v1.2 for support)
# greetings @pjft for his famous favorits and @meleu for the RegEx sniplet 
espid=$( pgrep -f "/opt/retropie/supplementary/.*/emulationstation([^.]|$)" ) # detect PID of ES binary only
if [ "$espid" ]; then  

#### Experimental part ####
IFS=" "
set – $( sed -n 4p /dev/shm/runcommand.info ) > /dev/null 2>&1
pkill $2 && sleep 4                                                           # v1.4 Sleeptimer to give ES chance to save XML filestate (untestested)
#### Experimental part ####
 
   touch /tmp/es-shutdown && chown pi:pi /tmp/es-shutdown                     # v1.1 Change file permission of es-shutdown to user:group pi:pi
   kill $espid                                                                # v1.2 use kill@detected PID - easier to maintain now!
exit
fi

meleu

@cyperghost some notes

the indentation can be improved :)
the default IFS is space, tab and newline. I think there's no need to set it as space
I'm not getting the reason why you are messing with the set command (unnecessary complexity)...

the suggested command doesn't work for you?

pkill -f "$(sed -n 4p /dev/shm/runcommand.info)"

cyperghost

@meleu yes
pkill -f "$(sed -n 4p /dev/shm/runcommand.info)" Does not work. So you need to extract just binary call... I tested with retroarch, glide64 and zdoom. All were prober working by set-command

meleu

@cyperghost said in Mausberry Shutdown Script Doesn't Save Metadata:

@meleu yes
pkill -f "$(sed -n 4p /dev/shm/runcommand.info)" Does not work.

weird. I'm not able to test on my actual RetroPie, but look the test I've made:

[PROMPT]$ sleep 1000 &
[1] 8648
[PROMPT]$ cat test.info
1st line
2nd line
3rd line
sleep 1000
bla
bla
bla

[PROMPT]$ pkill -f "$(sed -n 4p test.info)"
[1]+  Terminated              sleep 1000

But I noticed an issue when the file to look for the 4th line doesn't exist... then my suggestion is to use this

[[ -f /dev/shm/runcommand.info ]] && pkill -f "$(sed -n 4p /dev/shm/runcommand.info)"

Can you test it on a real RetroPie setup?

cyperghost

@meleu Not now ... Have to work :)
Cya mate!

meleu

@cyperghost I found the problem: that line from runcommand.info has some double quotes wich is confusing the pkill. Here's my current solution:

rcinfo=/dev/shm/runcommand.info
[[ -f "$rcinfo" ]] && pkill -f -9 "$(sed -n 4p "$rcinfo" | cut -d' ' -f1)"

I tested on my retropie here and it seems to work. Please test it when you have a chance.

Cheers!

hansolo77

You guys are just talking gibberish again. For somebody who's unfamiliar with all of this, I'm completely lost. RetroPie is only my 2nd ever Pi project, and really only my first exposure to the scripting side of it. I'm eager to learn, but throwing out seemingly random lines of code without reference or instruction on where to place it doesn't help me any. :) No biggie, I'll get there. I'm just totally unfamiliar with the commands. set sed, IFS.. totally new to me. I only just learned about top like 4 days ago. ^_^

So tomorrow after work, would you rather I test @cyperghost's v1.4 or replace that section with @meleu's? Or would it be better to just wait and let ya'll hash it out some more?

meleu

@hansolo77 haha... sorry for the nerdy stuff. :)

my suggestion is to try this:

espid=$(pgrep -f "/opt/retropie/supplementary/.*/emulationstation([^.]|$)")
if [ "$espid" ]; then
    [[ -f "/dev/shm/runcommand.info" ]] \
    && pkill -f -9 "$(sed -n 4p "/dev/shm/runcommand.info" | cut -d' ' -f1)" \
    && sleep 4
    touch /tmp/es-shutdown && chown pi:pi /tmp/es-shutdown
    kill $espid
fi

hansolo77

Ok cool. I'm going to bed soon so I will test this tomorrow when I get off work. If not right away, I'm off Thursday, so plenty of time then.

cyperghost

@meleu
You can even improve :)

Edit runcommand-onend.sh and add

sudo rm /dev/shm/runcommand.info

or make PR to runcommand.sh :)
Because runcommand.info isn't removed if emulator ends by start+select button :) It isn't really needed but it's a nice cleanup and definates the addition to the GPIO script you made with more sense.

meleu

@cyperghost it can be useful for debugging. I prefer to keep it even after the emulator has finished.

cyperghost

@meleu And why do you check presence of runcommand.info in your script? Don't get me wrong but I think the filecheck only makes sense if you remove that after emulator call ends? Because you will always run the "sleep 4"-command even if you are only in ES :)

meleu

@cyperghost because if the file doesn't exist that sed will fail and print nothing (empty string).

Just for fun do the following

save all important file you have open.
perform this command: pkill -f ""
cry (well, if you saved the files you don't have to cry. as I didn't saved, I cried)

Explaining: using an empty string as the pattern matches "everything". And the result is pkilling every single process owned by the pkiller!

I noticed it on an unpleasant way. :)

cyperghost

@meleu Okay ... what about this one?
It's pretty save and finds out PID of every emulator :)

#!/bin/bash
emucall=$(sed -n 4p /dev/shm/runcommand.info)
emupid=${emucall#* }
pos=$(expr ${#emucall} - ${#emupid})
emupid=$(pgrep -f ${emucall:0:$pos})
kill $emupid

Then if PID is a true value kill first the emulator and then kill ES in seconds instance... Thank your for every suggestions - I learn really a lot of your examples!

meleu

@cyperghost said in Mausberry Shutdown Script Doesn't Save Metadata:

@meleu Okay ... what about this one?

#!/bin/bash
emucall=$(sed -n 4p /dev/shm/runcommand.info)
emupid=${emucall#* }
pos=$(expr ${#emucall} - ${#emupid})
emupid=$(pgrep -f ${emucall:0:$pos})
kill $emupid

Wow! It's a bit complex, isn't it?

Yeah, using parameter substitution is a good solution here. But I would simplify it with this:

emucall="$(sed -n 4p /dev/shm/runcommand.info)"
[[ -n "$emucall" ]] && pkill -f "${emucall% *}"

By the way, sometimes I feel like we are messing @hansolo77 's thread with all those bash snippets. I'm going t open a bash thread for us. :-)

EDIT: topic created https://retropie.org.uk/forum/topic/11900/shell-scripting-topic

lostless

@meleu i think it's all relevant. I'm a mauseberry user as well and I find it interesting that I can make it finally function the way it needs to in a retropie setup. If we can get it to quit an emulator, save the sram And then save the meta data for emulation station, the better. I'm elated that my switch now saves meta data when in emulation station. I've had to redo scrapping so many times. 👍

hansolo77

Here here! Thanks @lostless :) I knew I wasn't alone in this. And yeah, you guys are just leaving me in the dust with all these snippets. I'd love to learn how to do all that on my own too, but until I do I have to rely on you guys coming up with solutions for me to test and try.

I hate to say, I have a migraine again tonight, so I'm not gonna be much help in troubleshooting a new method/addition. But I will try to do it tomorrow since I'm off work.

NamErehWon

Correct me if I'm wrong, but it appears that the script monitoring the GPIO isn't debouncing the input. You would have to hold the button for up to a second depending on where in the sleep you hit it. This should cover debouncing and make it so you could require a hold of a specific length of time.

 #GPIO init stuff here
 previous_power = 0
 while [ 1 = 1 ]; do
    power=$(cat /sys/class/gpio/gpio$GPIOpin1/value)
    if [$power != $previous_power]; then
       sleep 0.05 #might need to be tweaked. You can make it 1s+ to require a hold
       power=$(cat /sys/class/gpio/gpio$GPIOpin1/value)
       if[$power != 0];then
          #shutdown code here
       fi
    fi
    previous_power = $power
    #you can put a short sleep here if need be
 done