shell scripting topic

hiulit

@meleu Thank you! Done! Works perfectly :D
Could you elaborate on how $(cd "$(dirname "$0") works? What does $0 mean? Thanks again!

hiulit

I found that if I specify a font when using convert it decreases the image creation time, like a lot!
It also depends on the sentence's length. But when specifying a font I get pretty good results with a 3 line sentence :O

real 0m3.338s
user 0m2.472s
sys  0m0.824s

compared to:

real 1m3.849s
user 0m12.148s
sys  0m1.024s

meleu

@hiulit said in shell scripting topic:

Could you elaborate on how $(cd "$(dirname "$0") works? What does $0 mean?

$0 is a positional parameter where the string you used to call the script is stored. More info about positional parameters can be found here (by the way, this doc has valuable info about bash scripting).

Now let me elaborate why I think that one-liner to get the script dir is a good way to go...

To ilustrate let's consider that the script was invoked from a different directory than the one where the script is placed. Let's consider the scenario I used as example on my post above, where I am calling the your script with this line:

prompt$  ./funfacts/es-fun-facts-splashscreens.sh

Now I'm going to break down this variable definition line (skipping the parts that I think you already know):

readonly SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"

$0 results in ./funfacts/es-fun-facts-splashscreens.sh
dirname "./funfacts/es-fun-facts-splashscreens.sh" results in./funfacts
cd "./funfacts" && pwd results in /FULL/PATH/TO/src/funfacts

I hope I was clear. :)

EDIT: if you want an extremely detailed and strong way to get the script's dir, take a look here: http://www.ostricher.com/2014/10/the-right-way-to-get-the-directory-of-a-bash-script/

It's a bit overkill for such a single task, but I would like to let the link here for future references. :)

hiulit

Hey, thanks again! It's crystal clear.

hiulit

For the fun facts splashscreens project I want to know which theme is currently active in EmulationStation and its font.

Here's what I'm doing:

function get_current_theme() {
    grep "name=\"ThemeSet\"" "$home/.emulationstation/es_settings.cfg" | sed -n -e "s/^.*value=['\"]\(.*\)['\"].*/\1/p"
}

function get_theme_font() {
    xmlstarlet sel -t -v "/theme/view[contains(@name,'detailed')]/textlist/fontPath" "$ES_DIR/themes/$current_theme/$current_theme.xml" 2> /dev/null
}

It's working but I don't know if it's the right way to do it.

Acutally, get_theme_font() is taken from @meleu 's generate-launching-imagesso I guess it should be ok :P

meleu

@hiulit I think they are just fine. Maybe get_current_theme() can be tweaked a little to be an one-liner sed. But as this is a small script, it's fine to keep it as is.

Another little thing I noticed is regarding that Regular Expression in the sed line. You don't need to explicitly match "start of the line followed by anything" (this is what ^.* means).

Also, I think we can tweak get_theme_font() in order to let it get the font for an arbitrary theme (defined by the user).

cyperghost

@hiulit said in shell scripting topic:

I found that if I specify a font when using convert it decreases the image creation time, like a lot!
It also depends on the sentence's length. But when specifying a font I get pretty good results with a 3 line sentence :O

That was my first suggestion. But convert gots 2 caveeats

It needs ghostscript (I'm unsure if caption needs it)
You have to set correct position
(It needs the font you call)

... but it's faster than just use captions because it's independent of the images you merge but it's your turn to set coordinates ;)

@meleu It's always a pleasure to see you in action ;)

meleu

@hiulit said in Fun Facts Splashscreens:

@meleu When I encountered the problem with Pixel theme and xmlstarlet I tried a different approach for finding the font.
function get_theme_font() {
    get_current_theme
    if [[ -n "$(find "$ES_DIR/themes/$current_theme/art" -type f -name '*.ttf')" ]]; then
        font="$(find "$ES_DIR/themes/$current_theme/art" -type f -name '*.ttf')"
    else
        font=$DEFAULT_FONT
    fi
}
I did the job, but I wasn't happy about repeating the find function , but I don't know any better :P

Do you think that could be a workaround for finding theme fonts?

I know that some themes can have multiple fonts but I think it's ok to use the first one found.

3 notes about the code above:

you should use that font="$(find...)" before the if and then if [[ -n "$font" ]] (optmization)
maybe using find can be a good approach but only after the current method fail. Also that find command needs more tweaking... Look the files at ComicBook/art directory for example. There are more than one .ttf file. Then we can make the find get only the first match. You did a good catching here! ;)
that line with font=$DEFAULT_FONT... Man, memorize one thing for you shell script coder life: unless you have a really good reason, ALWAYS DOUBLE QUOTE YOUR VARIABLES. If you want an extensive (and a bit boring) explanation for that, you can read it here

I'm on my lunch time now. I'll try to eat something and then send another PR.

Cheers!

cyperghost

@meleu @hiulit Maybe annother point of view but maybe if the theme name is already extracted why not just search for *.ttf-files and use results as match and then do use just a simple grep alongside the xml to get a match ;)

meleu

@cyperghost as far as I understood @hiulit wants specifically the font used in detailed view. At least that's what that xmlstarlet command is getting.

@hiulit submitted another PR: https://github.com/hiulit/es-fun-facts-splashscreens/pull/2

cyperghost

@meleu Ah okay approved. But I think a generic solution is hard to find - so it's nice to have the fallback option to use Carbon-fonts :)

hiulit

Well, actually, I used the same line @meleu is using in his generate-launching-images.sh:P See:

https://github.com/meleu/generate-launching-images/blob/c55e61ee0066438068cf5b72c62430337bb1e3d5/generate-launching-images.sh#L416

xml_path="/theme/view[contains(@name,'detailed')]/textlist/fontPath"

I don't know if we could have a more "standard" search function for fonts, because some themes have different fonts and it would be difficult to know which one is the "primary" font. I'm not into EmulationStation theming so I don't know if there's a predominant font that we could use.

Also, @cyperghost , if I understood you correctly, you though about searching for the font based on the theme's name? (e.g Pixel theme -> pixel.ttf)
Because, for what I see, there isn't a "standardized" naming convention on font naming for themes.
The default to Carbon's font it's nice, yeah! ;)

hiulit

I would like to try to run Fun Facts Splashscreens on system's shutdown (or startup) but I don't have any clue about where to start looking. Any hint?

I've been looking at this thread https://retropie.org.uk/forum/topic/4836/emulationstation-shutdown-script/ and I've been able to add a line in /opt/retropie/supplementary/emulationstation/emulationstation.sh to launch es-fun-facts-splashscreens.sh and it works, but I don't think this is right place to do it nor the way to do it.

The place isn't right because, I think, the script should run either on system's startup or shutdown, as @Zigurana mentioned, not when EmulationStation starts, restarts or shutdowns. It doesn't make sense, because the splashscreens shows before EmulationStation starts.

And the way to do it isn't right because I don't like that, for this script to be launched, you have to edit some "core" files.

Is there any way to launch a script either on system's startup or shutdown?

meleu

@hiulit said in shell scripting topic:

/opt/retropie/supplementary/emulationstation/emulationstation.sh

This file will be overwritten after the next ES update. Then, you're right, it's not the best script to tweak...

Is there any way to launch a script either on system's startup or shutdown?

At shutdown it's a bit tricky. I did this for my trick to gracefully finish ES and save metadata in every system shutdown

At start it's pretty simple: /etc/rc.local. And in my opinion your script can safely be placed here but you need to remove that command to show the image in the end.

It's a good place because the script can be setted to run in background (add & in the end of line that is calling your script). I think the current splashscreen to be displayed will be the previous generated one, but your script would be generating a new splash for the next boot. ;-)

hiulit

@meleu I've added the script to etc/rc.local but it seems that there's something wrong with the $home variable. I get this error:

sed: cant' read /root/.emulationstation/es_settings.cfg: No such file or directory

Instead of getting /home/pi as $home, it gets root, so the script doesn't work.

hiulit

@hiulit If I launch the script adding -H -u pi it works, but I don't think it's the best way to do it...

meleu

@hiulit said in shell scripting topic:

@hiulit If a launch the script adding -H -u pi it works, but I don't think it's the best way to do it...

IMHO it's perfectly acceptable and also a really good way to do it. ;-)

Of course if we evolve this method, this config (adding the script call in rc.local) won't be made manually, and then we can get the username to use.

;)

hiulit

@meleu But then, does it make sense to keep using this?

user="$SUDO_USER"
[[ -z "$user" ]] && user="$(id -un)"
home="$(eval echo ~$user)"

Because that's what's getting root as $home when the script is launched in /etc/rc.local.

We could then just do home="/home/pi", don't you think?
Because adding the user -H -u pi like this removes the dynamism of the function (getting the user dynamically), right?

meleu

@hiulit said in shell scripting topic:

@meleu But then, does it make sense to keep using this?
user="$SUDO_USER"
[[ -z "$user" ]] && user="$(id -un)"
home="$(eval echo ~$user)"

Yes. Keeping this in the script makes sense because the user can use it at any moment, right?

Because that's what's getting root as $home when the script is launched in /etc/rc.local.

Does it happen even when using sudo -H -u pi ...???

We could then just do home="/home/pi", don't you think?
Because adding the user -H -u pi like this removes the dynamism of the function (getting the user dynamically), right?

Sorry if I misunderstood you, but you want to avoid to remove dynamism by hardcoding home=/home/pi? Sounds weird for me.

I would consider what we have until now like a proof-of-concept script (kudos to you for working on this). Let's wait what the big boss will say about my proposal and take next steps based on his decision.

If he refuse, we can continue this project extra-officially. I'm just trying to say that what approach to use to launch the script at startup depends on that decision.

cyperghost

@hiulit said in shell scripting topic:

Also, @cyperghost , if I understood you correctly, you though about searching for the font based on the theme's name? (e.g Pixel theme -> pixel.ttf)
Because, for what I see, there isn't a "standardized" naming convention on font naming for themes.
The default to Carbon's font it's nice, yeah! ;)

No, we misunderstood ;)
If the theme CARBON looks like this
./art/font-1.ttf and ./art/font-2.ttf
you can try to use ls *.ttf -R to find all fonts that are in the theme folder.
Then do a grep search with all fonts and give the most usefull hit the path to your $DEFAULT_FONT

Is it clear now? But maybe @meleu gots a better solution. I know it's bad to use lscommand for this action ;)