Sony DualShock 3 - call for testers: "sixaxis" script module

Headcrab

@mitu
I tried one more fresh install, just to make sure.
I am pressing the PS/Share' button before dis-connecting.

It is consistently not discovering the controller after installing the sixaxis driver.
Doing the "disable thrid party" option and rebooting works 99% of the time.

mitu

Thanks for testing - I'll add a note in the wiki for this.

Headcrab

@mitu
Thanks for your time.
I hope we get confirmation from other ps3 controller owners at some point.

wmarcio

On my pi3b+ with retropie 4.6 on debian 9.11 wont worked, i made the same process...

mitu

@wmarcio said in Sony DualShock 3 - call for testers: "sixaxis" script module:

On my pi3b+ with retropie 4.6 on debian 9.11 wont worked, i made the same process...

You're using a 3rd party controller, did you run the 'Enable 3rd party controllers' step ?

Headcrab

I've done some more testing, and found out that libbluetooth-dev does the trick.
So for the official ps3 controller these are the steps that work on my end.

install sixaxis driver
sudo apt-get install libbluetooth-dev
reboot
Connect the controller over usb
Bluetooth menu > "Register and Connect to Bluetooth Device"
Follow the on screen instructions

mitu

@Headcrab said in Sony DualShock 3 - call for testers: "sixaxis" script module:

I've done some more testing, and found out that libbluetooth-dev does the trick.

I think that's a red herring, the package contains only development files, without any impact on the Bluetooth stack that's running on the Pi.

EDIT: Hm, actually it seems to contain more than that. I'll take a look, but on my system this is not installed and the controller works ok.

Headcrab

@mitu
My findings are not based on actual knowledge of what each package does, so you are probably right.

But just to be clear, when you say that your controller works fine do you mean that when trying to Register for the first time, it is being discovered without that package being installed?

mitu

@Headcrab said in Sony DualShock 3 - call for testers: "sixaxis" script module:

But just to be clear, when you say that your controller works fine do you mean that when trying to Register for the first time, it is being discovered without that package?

I never had that package installed and it's not installed now, so yes - discovery and (now) basic controller functionality worked without it. There might by a difference between systems though, I've paired and connected on a Pi4, which has a different BT chipset, so you being on a Pi3B+ might count.

Headcrab

@mitu said in Sony DualShock 3 - call for testers: "sixaxis" script module:

I've paired and connected on a Pi4, which has a different BT chipset, so you being on a Pi3B+ might count.

I just "borrowed" a rpi4(1gb) from my nas setup so i can test this.

I performed these steps:

Burn the "retropie-buster-4.6-rpi4.img" image on the sd card
boot into emulationstation
connect ps3 controller over usb and configure controls, so i can navigate
go to driver packages and install sixaxis
with the controller connected over usb navigate to Bluetooth > "Register and Connect to Bluetooth Device"
follow the instructions to unplug and re-plug the cable (and leave it connected)

The outcome was exactly like on my rpi3.

Discovery fails.
If i install libbluetooth-dev and reboot
Discovery succeeds

Maybe it's a problem with my controller, i don't know.
Also, i do not own a ps3 console, so it is not interfering in any way.

wmarcio

@mitu, Hello, thank you, you are always helping people. My controller is original Sony, I always used the same controller, before upgrading to version 4.6, the same controller worked perfectly.

mitu

@wmarcio What version did you run before the upgrade ? Did you install the 4.6 Buster image ? Did you enable support for 3rd party controllers ?

wmarcio

@mitu

I don't remember the previous version exactly, but I always update frequently, it was the last one before I upgraded to 4.6. Yes I did a clean installation for version 4.6 Buster, as I saw that it didn't work, I restored the previous image of raspbian 9.11 stretch and Retropie 4.6, that's when the problem started. Yes, I have enabled support for third party control.

mitu

@wmarcio said in Sony DualShock 3 - call for testers: "sixaxis" script module:

I don't remember the previous version exactly, but I always update frequently, it was the last one before I upgraded to 4.6.

There's no difference between the previous (4.5.20) and the 4.6 version, except the version tag. There have been no modifications in quite a while for the bluetooth module in RetroPie, so I don't see what change in 4.6 might trigger this problem.

Yes I did a clean installation for version 4.6 Buster, as I saw that it didn't work, I restored the previous image of raspbian 9.11 stretch and Retropie 4.6, that's when the problem started. Yes, I have enabled support for third party control.

Then I suggest you try the ps3controller package, it might work better with 3rd party controllers.

wmarcio

@mitu ok, will try It. Thxs again.

psyke83

@Headcrab

Thanks for your troubleshooting efforts. It seems thatlibbluetooth-devitself doesn't fix your problem, but it triggers installation of the actual needed package - libbluetooth3, which contains the sixaxis plugin for BlueZ. This is quite odd, as I would have expected it to be present in a default Raspbian installation.

I'll do some checking and report back soon.

mitu

@psyke83 Looks like - in my case - libbluetooth3 is also present, installed as a kodi dependency.

psyke83

@mitu said in Sony DualShock 3 - call for testers: "sixaxis" script module:

@psyke83 Looks like - in my case - libbluetooth3 is also present, installed as a kodi dependency.

That also explains why I didn't notice the issue until now. This PR should fix the issue: https://github.com/RetroPie/RetroPie-Setup/pull/3125

steeeb

Thanks for the ongoing work on this.

I can't seem to get my Shanwan controllers to pair. RPI3B+, Buster from download today, upgraded first (both the retropie_setup scripts and 'Yes' to the OS/Kernel when it asks if you want to update that as part of 'Update'.

I've enabled third party support, which installs customhidsony.

I go to Register and Connect to Bluetooth Device, and it takes around 15 seconds for anything to happen weirdly - it used to be instant - then I get the Searching.. screen (with third party support it has the DualShock string - without it, it doesn't). In any case, no devices found. I've even tried custombluez and that doesn't work.

This used to work on an old Stretch build (I grabbed the original PR when sixaxis was first added as a pull request and it worked fine there).

It looks like some error flashes up, I did it via SSH so I could see the error, it appears to be this:

^[[CTraceback (most recent call last):                                                  │ │  
  File "/home/pi/RetroPie-Setup/scriptmodules/supplementary/bluetooth/bluez-test-device", line 44, in <module>              │ │                                                                      │ │  
    adapter = bluezutils.find_adapter(options.dev_id)───────────────────────────────────┘ │  
  File "/home/pi/RetroPie-Setup/scriptmodules/supplementary/bluetooth/bluezutils.py", line 14, in find_adapter              │                       <  OK  >            <Cancel>                       │  
    return find_adapter_in_objects(get_managed_objects(), pattern)────────────────────────┘  
  File "/home/pi/RetroPie-Setup/scriptmodules/supplementary/bluetooth/bluezutils.py", line 9, in get_managed_objects
    manager = dbus.Interface(bus.get_object("org.bluez", "/"),
  File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 241, in get_object
    follow_name_owner_changes=follow_name_owner_changes)
  File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", line 248, in __init__
    self._named_service = conn.activate_name_owner(bus_name)
  File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 180, in activate_name_owner
    self.start_service_by_name(bus_name)
  File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 278, in start_service_by_name
    'su', (bus_name, flags)))
  File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 651, in call_blocking
    message, timeout)
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms)

systemctl status dbus-org.bluez.service

Looks to give:
Active: inactive (dead)
May 05 00:10:04 raspberrypi systemd[1]: Condition check resulted in Bluetooth service being skipped.

The systemd line is added each time Register and Connect is pressed. It's inactive (dead) straight after I log in after boot.

pi@raspberrypi:~ $ service hciuart status
● hciuart.service - Configure Bluetooth Modems connected by UART
   Loaded: loaded (/lib/systemd/system/hciuart.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Tue 2020-05-05 00:12:50 BST; 5min ago
  Process: 348 ExecStart=/usr/bin/btuart (code=exited, status=1/FAILURE)

May 05 00:12:20 raspberrypi systemd[1]: Starting Configure Bluetooth Modems connected by UART...
May 05 00:12:50 raspberrypi btuart[348]: Initialization timed out.
May 05 00:12:50 raspberrypi btuart[348]: bcm43xx_init
May 05 00:12:50 raspberrypi systemd[1]: hciuart.service: Control process exited, code=exited, status=1/FAILURE
May 05 00:12:50 raspberrypi systemd[1]: hciuart.service: Failed with result 'exit-code'.
May 05 00:12:50 raspberrypi systemd[1]: Failed to start Configure Bluetooth Modems connected by UART.

pi@raspberrypi:~ $ sudo hciconfig -a
pi@raspberrypi:~ $ sudo systemctl start bluetooth
pi@raspberrypi:~ $ systemctl status bluetooth
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
   Active: active (running) since Tue 2020-05-05 00:19:42 BST; 7s ago
     Docs: man:bluetoothd(8)
 Main PID: 1097 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 1772)
   Memory: 1.7M
   CGroup: /system.slice/bluetooth.service
           └─1097 /usr/lib/bluetooth/bluetoothd

May 05 00:19:42 raspberrypi systemd[1]: Starting Bluetooth service...
May 05 00:19:42 raspberrypi bluetoothd[1097]: Bluetooth daemon 5.50
May 05 00:19:42 raspberrypi systemd[1]: Started Bluetooth service.
May 05 00:19:42 raspberrypi bluetoothd[1097]: Starting SDP server
May 05 00:19:42 raspberrypi bluetoothd[1097]: Bluetooth management interface 1.14 initialized

But it still won't pair - that's as far as I can get. Anyone have any ideas?

steeeb

I've found the issue. Turning off wifi seems to break bluetooth! (It never used to, as I used to have it off beforehand too).

Looks like theres a bug in the latest rpi firmware ^

Only thing now is it seems L/R trigger is set to Axis 2+ and Axis 5+ and it takes like 10 minutes to be able to get EmulationStation to set it when setting up the controller (not checked if it works in game yet) - anyone else had this problem? Setting via USB has the same axis numbers but it's really easy to set.