Sony DualShock 3 - call for testers: "sixaxis" script module
-
@sano said in Sony DualShock 3 - call for testers: "sixaxis" script module:
@pjft
Just FYI those errors are logged in /var/log/kern.log*.
On my setup that was several MB of logs rewritten on a daily basis (I tested and had 500kB of logs for a few minutes of DS3 use), in addition to the random inputs.
Even with a F2FS formatted root partition, I don't like having error logs writing over and over a a several MB per day on a SD card for nothing :)
Gasp, my OCD is still kicking here...That seems quite excessive. I would see perhaps a dozen or so messages in one day at most, not several megabytes worth. I haven't seen any warnings at all since reducing the UART speed.
Perhaps it's due to overclocking your Pi?
-
@psyke83
No overclock :)
I have a personal motto to stay as vanilla as possible.
The only changes I make on my installs are :- disabling overscan
- disabling wifi
- migrate root partition to F2FS
Here is an example of log I had for a single second before reducing speed :
Feb 24 09:51:37 retropie kernel: [552204.012012] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.012040] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.012088] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.012184] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.012274] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.012353] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.114573] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.114577] Bluetooth: hci0 ACL packet for unknown connection handle 520 Feb 24 09:51:37 retropie kernel: [552204.114642] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.114728] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.114813] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.114900] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.114966] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.181939] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.181991] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.182071] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.182165] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.182252] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.182340] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.182426] Bluetooth: hci0: Frame reassembly failed (-84) Feb 24 09:51:37 retropie kernel: [552204.182480] Bluetooth: hci0: Frame reassembly failed (-84) -
@sano said in Sony DualShock 3 - call for testers: "sixaxis" script module:
@psyke83
No overclock :)
I have a personal motto to stay as vanilla as possible.It's good that we have a mitigation for the issue; regardless, if your warranty isn't void, perhaps you could report the issue to the firmware issues tracker. No need to go into detail about RetroPie or this scriptmodule, as you can replicate the behaviour with stock bluez and the default hid_sony driver on the current stretch kernel.
I have a suspicion that your Pi's bluetooth module may be faulty, considering that we have the same revision of Pi. I've often seen them offer to replace boards when a HW fault is diagnosed (but of course, I'm only speculating about your board).
To be clear, the problem is not that the frame reassembly errors are appearing; our revision board doesn't support HW flow control, so those messages are (unfortunately) expected. The reason I suspect a HW fault is due to the magnitude to which the error is occurring for you along with the phantom feedback. Perhaps if you can test in a "quieter" environment and rule out interference etc., it might help. I'd like to see more people test this module so we can get a wider assessment as to whether this would be a common problem.
-
Hi all,
i have a Shanwan and a Gaisa controller, i would like to try sixaxis.
I installed sixaxis and automatically it will install customhidsony.
Becasue my controllers are not sony i try to install custombluez but it give me an error because a lot of package are missingdh-systemd git-buildpackage icu-devtools libcap-ng-dev libdbus-glib-1-dev libdw-dev libical-dev libicu-dev libreadline-dev libsubunit-dev libsubunit0 libtinfo-dev libical2Tried to install all the packages manually with the command
sudo apt-get update sudo apt-get install dh-systemd git-buildpackage icu-devtools libcap-ng-dev libdbus-glib-1-dev libdw-dev libical-dev libicu-dev libreadline-dev libsubunit-dev libsubunit0 libtinfo-dev libical2I was able to install all the packages except libical2
E: Unable to locate package libical2.
Someone can help me ?
I'm using Retropie 4.3.12 on a Raspberry Pi 3.Thank you
-
Thanks for bringing the problem to my attention. It seems that I accidentally left in some unnecessary depends that should fulfilled by the corresponding -dev packages;
libical-devshould be sufficient, as it selectslibical2on stretch, but on jessie it probably selects the old package.I've updated the PR/branch to remove the excess depends, so it should work for you now.
P.S. You have the option to install custombluez from binary, but it's also possible to build from source. If building from source fails, then I may need to add more explicit dependencies to the script for jessie. I only have Raspbian stretch installed on my test card at the moment, so let me know if installing from source is broken and I'll re-flash jessie to test.
In case you're not familiar with git, this should refresh the branch for you due to the branch update being forced, assuming you chose the remote name as
psyke83:git fetch psyke83 git reset --hard psyke83/sixaxisThanks.
-
@psyke83
Thank you for replying me.
As asked i try to install custombluez from source but it fail with the following errormake[2]: *** [client/bluetoothctl] Error 1 Makefile:3183: recipe for target 'all' failed make[1]: *** [all] Error 2 make[1]: Leaving directory '/home/pi/RetroPie-Setup/tmp/build/custombluez/build-area/bluez-5.48' dh_auto_build: make -j1 returned exit code 2 debian/rules:35: recipe for target 'build' failed make: *** [build] Error 2 dpkg-buildpackage: error: debian/rules build gave error exit status 2 debuild: fatal error at line 1376: dpkg-buildpackage -rfakeroot -D -us -uc -i -I failed gbp:error: 'debuild -i -I -us -uc' failed: it exited with 29 /home/pi/RetroPie-Setup/tmp/build/custombluez /home/pi/RetroPie-Setup /home/pi/RetroPie-Setup Could not successfully build custombluez - Updated version of BlueZ Bluetooth stack Install alongside 'sixaxis' driver if you need to pair third-party (Gasia/Shanwan) DualShock 3 controllers. (/home/pi/RetroPie-Setup/tmp/build/custombluez/build-area/bluetooth_5.48-1~rpi1_all.deb not found).Installing from binary seems to install without problems.
Let me know if you need the full log if you need me to do some test.thank you
-
@psyke83
The Hori controller is in fact a PS3 and PS4 compatible controller (with a switch to choose PS3/4 compatibility, but this doesn't seem to affect the driver).
Will it use the Sony hid driver even if it's seen as a regular USB controller by the OS ?Anyway, please feel free to relocate the last few posts to your thread if you think it's more relevant.
-
@sano said in Sony DualShock 3 - call for testers: "sixaxis" script module:
@psyke83
The Hori controller is in fact a PS3 and PS4 compatible controller (with a switch to choose PS3/4 compatibility, but this doesn't seem to affect the driver).
Will it use the Sony hid driver even if it's seen as a regular USB controller by the OS ?Anyway, please feel free to relocate the last few posts to your thread if you think it's more relevant.
Yes, the sony-hid driver is used for both PS3 and PS4 controllers. However, I'm not very familiar with DS4 clone compatibility.
Without this scriptmodule, the
hid-sonykernel driver is used for DS3 pads via USB, while theps3controlleruserspace driver claims the input device on the Bluetooth connection, but names the controller differently (without the manufacturer prefix). You may have noticed that on a fresh install, if you map buttons via USB, then install ps3controller and pair, you have to map them again - that's because of the name discrepancy. When using this scriptmodule, the hid-sony driver is used on USB and Bluetooth connections, and thus shares the same name for both.What happens if you pair your DS3 pad, unplug the Hori and then plug in again? Does the Hori display a player led for you to tell if it's player 1/2/3/4?
-
@psyke83
I have to say that I configured the Hori on the fresh install, then installed sixaxis, and didn't have to reconfigure the HORI.
Unfortunately too, the Hori controller doesn't have LEDs for player number... -
@sano said in Sony DualShock 3 - call for testers: "sixaxis" script module:
@psyke83
I have to say that I configured the Hori on the fresh install, then installed sixaxis, and didn't have to reconfigure the HORI.
Unfortunately too, the Hori controller doesn't have LEDs for player number...Well, that's the expected behaviour since it's a USB-only pad, right? Only the
hid-sonydriver will be used, sinceps3controlleronly intercepts BT connections. I was talking about actual DS3 controllers re: the name discrepancy. -
@meleu @psyke83
I unplugged the Hori stick and plugged a Dragonrise joystick.The behaviour of the jslist executable is the same :
First jslist call with only the USB controller, second just after the DS3 connected (without unplugging the USB controller)
pi@retropie:~ $ /opt/retropie/supplementary/joystick-selection/jslist 0:DragonRise Inc. Generic USB Joystick pi@retropie:~ $ /opt/retropie/supplementary/joystick-selection/jslist 0:Sony PLAYSTATION(R)3 Controller 1:DragonRise Inc. Generic USB JoystickSo apparently the fact that the HORI is a PS3 compatible device is not relevant.
Same symptoms :
Retroarch (and the OS) considers the USB plugged joystick as the first one, but jslist identifies the DS3 with the index 0.
The joystick selection tool updates retroarch config to use the index 0 (the wanted DS3), but index 0 for retroarch is the Dragonrise (or Hori previously).I don't know if I'm clear enough, here... It's 1 am, sorry :)
-
@sano said in Sony DualShock 3 - call for testers: "sixaxis" script module:
@meleu @psyke83
I unplugged the Hori stick and plugged a Dragonrise joystick.The behaviour of the jslist executable is the same :
pi@retropie:~ $ /opt/retropie/supplementary/joystick-selection/jslist 0:DragonRise Inc. Generic USB Joystick pi@retropie:~ $ /opt/retropie/supplementary/joystick-selection/jslist 0:Sony PLAYSTATION(R)3 Controller 1:DragonRise Inc. Generic USB JoystickSo apparently the fact that the HORI is a PS3 compatible device is not relevant.
Same symptoms :
Retroarch considers the USB plugged joystick as the first one, but jslist identifies the DS3 with the index 0.
The joystick selection tool updates retroarch config to use the index 0 (the wanted DS3), but index 0 for retroarch is the Dragonrise (or Hori previously).I don't know if I'm clear enough, here... It's 1 am, sorry :)
I've had a long day too, need to sleep :). I'll pick this up tomorrow and do some testing here, as to be quite frank, I've never used the controller selection functionality, so I'll need to delve into the scripts and see what's happening. The problem is that I've only got two DS3 controllers, so I'm not sure how I'll distinguish changes. The controller LED probably corresponds to the kernel js index; if a script or retroarch etc. changes the LED manually via a sysfs node, then perhaps the node location has changed in the updated driver. I vaguely recall that the new
hid-sonydriver dropped its LED-specific code to use the generic kernel LED support. -
If you want to reproduce this :
- first install @meleu joystick selection
- plug only an USB controller (preferably not a DS3 for test purpose)
- get the controller index seen by jslist :
/opt/retropie/supplementary/joystick-selection/jslist- it should be 0 - power on a DS3 and call jslist again - you will have the DS3 with index 0 and the USB controller with the index 1. The LED on the DS3 is player 1 (should in fact be player 2 as it's the second connected controller)
- launch a console one player game - the player one controller is the USB one
-
Morning tests :
More logs, woohoo !
Hori detected at boot (as input0):[Sat Mar 10 09:35:27 2018] input: HORI CO.,LTD. Fighting Stick mini 4 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:0F0D:0088.0001/input/input0 [Sat Mar 10 09:35:27 2018] hid-generic 0003:0F0D:0088.0001: input,hidraw0: USB HID v1.11 Gamepad [HORI CO.,LTD. Fighting Stick mini 4] on usb-3f980000.usb-1.3/input0DS3 connecting through BT (as input1) :
[Sat Mar 10 09:37:26 2018] input: Sony PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:11/0005:054C:0268.0002/input/input1 [Sat Mar 10 09:37:26 2018] sony 0005:054C:0268.0002: input,hidraw1: BLUETOOTH HID v80.00 Joystick [Sony PLAYSTATION(R)3 Controller] on b8:27:eb:b3:70:3cStill jslist returns apparently false index and DS3 player 1 LED is on :
pi@retropie:~/RetroPie-Setup $ /opt/retropie/supplementary/joystick-selection/jslist 0:Sony PLAYSTATION(R)3 Controller 1:HORI CO.,LTD. Fighting Stick mini 4Out of curiosity, I also tried to plug the DS3 through USB, aaaaaannnd :
[Sat Mar 10 09:43:32 2018] usb 1-1.5: new full-speed USB device number 5 using dwc_otg [Sat Mar 10 09:43:33 2018] usb 1-1.5: New USB device found, idVendor=054c, idProduct=0268 [Sat Mar 10 09:43:33 2018] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [Sat Mar 10 09:43:33 2018] usb 1-1.5: Product: PLAYSTATION(R)3 Controller [Sat Mar 10 09:43:33 2018] usb 1-1.5: Manufacturer: Sony [Sat Mar 10 09:43:33 2018] input: Sony PLAYSTATION(R)3 Controller as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:054C:0268.0003/input/input2 [Sat Mar 10 09:43:33 2018] sony 0003:054C:0268.0003: input,hiddev0,hidraw1: USB HID v81.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-3f980000.usb-1.5/input0The jslist output is ok, the USB connected DS3 has index 1, and Hori has index 0...
pi@retropie:~ $ /opt/retropie/supplementary/joystick-selection/jslist 0:HORI CO.,LTD. Fighting Stick mini 4 1:Sony PLAYSTATION(R)3 ControllerMoreover, adding another DS3 (using BT this time) :
[Sat Mar 10 09:46:10 2018] input: Sony PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:12/0005:054C:0268.0004/input/input3 [Sat Mar 10 09:46:10 2018] sony 0005:054C:0268.0004: input,hidraw2: BLUETOOTH HID v80.00 Joystick [Sony PLAYSTATION(R)3 Controller] on b8:27:eb:b3:70:3c pi@retropie:~ $ /opt/retropie/supplementary/joystick-selection/jslist 0:Sony PLAYSTATION(R)3 Controller 1:HORI CO.,LTD. Fighting Stick mini 4 2:Sony PLAYSTATION(R)3 ControllerHere the BT connected DS3 took index 0, Hori shifted to index 1 and USB connected DS3 to index 2...
So to resume this mess :
USB connected DS3 are listed correctly by jslist (index follows the connection order)
BT connected PS3 seem to have precedence : they always take the first controller indexes according to jslist, shifting all other controllers indexes upward.
The issue is that OS and retroarch doesn't act the same and apparently rely on connection order for controller indexes.My opinion is that SDL joystick index used in jslist is somewhat different from the OS (and apparently retroarch) used index.
It's like the BT connected DS3 always get the lowest index for SDL, instead of taking the next available as it should.Hope this could help.
-
@madhorse said in Sony DualShock 3 - call for testers: "sixaxis" script module:
@psyke83
Thank you for replying me.
As asked i try to install custombluez from source but it fail with the following errorI'll be busy today, but when I get some time, I'll re-flash a jessie image to identify what packages I've missed - which I'm assuming is what's causing the build error.
If you can post the full log, it would be helpful. A quick way to identify what may be missing is:
sudo apt-get build-dep bluez...but you may need to edit your sources lists in
/etc/apt/to enable the deb-src lines, and then update your apt-get repository, for it to work.I'll get around to flashing jessie soon, but don't feel obliged to help with the issue of building from source. What will really be helpful from you is feedback on whether Gasia controllers work correctly via Bluetooth. Confirming that both types of third-party controllers work will be a positive step towards knowing if we can phase out the
ps3controllerdriver entirely.Thanks!
@Sano - much appreciated for the detailed information. I'll look into this soon, but I'm at a bit of disadvantage, as I don't have any controllers besides the two DS3s to test.
One thing that you could possibly try is to uninstall
customhidsonyafter installingsixaxis. Bluetooth pairing will actually work with the oldhid-sonykernel driver. You may need to remap the controller again, and the 10 minute disconnect won't be possible, but it may be helpful to know if the strange controller ordering behaviour differs between different versions of thehid-sonydriver, or if the problem is caused elsewhere. -
@psyke83 said in Sony DualShock 3 - call for testers: "sixaxis" script module:
@Sano - much appreciated for the detailed information. I'll look into this soon, but I'm at a bit of disadvantage, as I don't have any controllers besides the two DS3s to test.
One thing that you could possibly try is to uninstall customhidsonyafter installing sixaxis. Bluetooth pairing will actually work with the old hid-sony kernel driver. You may need to remap the controller again, and the 10 minute disconnect won't be possible, but it may be helpful to know if the strange controller ordering behaviour differs between different versions of the hid-sonydriver, or if the problem is caused elsewhere.Done !
Uninstalled customhidsony and rebooted.
The BT DS3 still connect, and the behavior is the same :(
dmesg -Toutput :[Sat Mar 10 13:26:31 2018] input: HORI CO.,LTD. Fighting Stick mini 4 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:0F0D:0088.0001/input/input0 [Sat Mar 10 13:26:31 2018] hid-generic 0003:0F0D:0088.0001: input,hidraw0: USB HID v1.11 Gamepad [HORI CO.,LTD. Fighting Stick mini 4] on usb-3f980000.usb-1.3/input0 ... [Sat Mar 10 13:27:19 2018] input: Sony PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:11/0005:054C:0268.0002/input/input1 [Sat Mar 10 13:27:19 2018] sony 0005:054C:0268.0002: input,hidraw1: BLUETOOTH HID v0.00 Joystick [Sony PLAYSTATION(R)3 Controller] on b8:27:eb:b3:70:3cjslist output before and after connecting DS3 by BT :
pi@retropie:~ $ /opt/retropie/supplementary/joystick-selection/jslist 0:HORI CO.,LTD. Fighting Stick mini 4 pi@retropie:~ $ /opt/retropie/supplementary/joystick-selection/jslist 0:Sony PLAYSTATION(R)3 Controller 1:HORI CO.,LTD. Fighting Stick mini 4Still retroarch considers the USB stick to be the first controller.
Maybe a change in sixaxis driver, or in SDL controller mapping...
This was definitely working back with jessie image :( -
Thanks. Despite it being a PS3-compatible, the
hid-sonydriver doesn't grab your Hori, as it's usinghid-generic. Not sure if that's relevant, though.I'm fairly certain this isn't a stretch issue, but you could confirm it's not by removing sixaxis, customhidsony and custombluez (if you ever installed it), and reinstall the standard
ps3controllerdriver. If the ordering issue is fixed, then at least we'll know it's caused byhid-sony/my PR and not the distribution upgrade. -
@psyke83
As the behaviour is the same with a non-sony compatible USB controller - Dragonrise, see my previous messages - I think we can conclude that the HORI Sony compatibility is not relevant.Edit : removed your branch and installed basic sixad driver, and unfortunately all is back to normal :
[Sat Mar 10 13:49:35 2018] input: PLAYSTATION(R)3 Controller as /devices/virtual/input/input3SDL controller indexes are now in the correct (connection) order:
pi@retropie:~/RetroPie-Setup $ /opt/retropie/supplementary/joystick-selection/jslist 0:HORI CO.,LTD. Fighting Stick mini 4 1:PLAYSTATION(R)3 ControllerAnd the LED on the DS3 is Player 2 (as it should be)...
@meleu you can take a breath, mate ;)
-
@psyke83 said in Sony DualShock 3 - call for testers: "sixaxis" script module:
If you can post the full log, it would be helpful. A quick way to identify what may be missing is:
sudo apt-get build-dep bluez...but you may need to edit your sources lists in
/etc/apt/to enable the deb-src lines, and then update your apt-get repository, for it to work.No problem, soon as possible i will report back with the information you asked and will try a gaisa controller to see if it's working.
In the meantime here is the full logThank you
-
@psyke83 said in Sony DualShock 3 - call for testers: "sixaxis" script module:
A quick way to identify what may be missing is:
sudo apt-get build-dep bluez
...but you may need to edit your sources lists in /etc/apt/ to enable the deb-src lines, and then update your apt-get repository, for it to work.I edited the
sources.listfile uncommentingdeb-src http://archive.raspbian.org/raspbian/ jessie main contrib non-free rpi
Removedcustombluezandsixaxisdriver to start from scratch.
Then i executesudo apt-get updateandsudo apt-get build-dep bluezand it didn't give any problemReading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: dh-systemd libcap-ng-dev libdbus-glib-1-dev libical-dev libreadline-dev libreadline6-dev libtinfo-dev 0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/697 kB of archives. After this operation, 2,282 kB of additional disk space will be used. Do you want to continue? [Y/n] y Selecting previously unselected package libcap-ng-dev. (Reading database ... 92387 files and directories currently installed.) Preparing to unpack .../libcap-ng-dev_0.7.4-2_armhf.deb ... Unpacking libcap-ng-dev (0.7.4-2) ... Selecting previously unselected package libdbus-glib-1-dev. Preparing to unpack .../libdbus-glib-1-dev_0.102-1_armhf.deb ... Unpacking libdbus-glib-1-dev (0.102-1) ... Selecting previously unselected package libical-dev. Preparing to unpack .../libical-dev_1.0-1.3_armhf.deb ... Unpacking libical-dev (1.0-1.3) ... Selecting previously unselected package libtinfo-dev:armhf. Preparing to unpack .../libtinfo-dev_5.9+20140913-1+deb8u2_armhf.deb ... Unpacking libtinfo-dev:armhf (5.9+20140913-1+deb8u2) ... Selecting previously unselected package libreadline6-dev:armhf. Preparing to unpack .../libreadline6-dev_6.3-8_armhf.deb ... Unpacking libreadline6-dev:armhf (6.3-8) ... Selecting previously unselected package libreadline-dev:armhf. Preparing to unpack .../libreadline-dev_6.3-8_armhf.deb ... Unpacking libreadline-dev:armhf (6.3-8) ... Selecting previously unselected package dh-systemd. Preparing to unpack .../dh-systemd_10.2.2~bpo8+1_all.deb ... Unpacking dh-systemd (10.2.2~bpo8+1) ... Processing triggers for man-db (2.7.5-1~bpo8+1) ... Processing triggers for install-info (5.2.0.dfsg.1-6) ... Setting up libcap-ng-dev (0.7.4-2) ... Setting up libdbus-glib-1-dev (0.102-1) ... Setting up libical-dev (1.0-1.3) ... Setting up libtinfo-dev:armhf (5.9+20140913-1+deb8u2) ... Setting up libreadline6-dev:armhf (6.3-8) ... Setting up libreadline-dev:armhf (6.3-8) ... Setting up dh-systemd (10.2.2~bpo8+1) ...Then installed
sixaxisand then i try to install againgcustombluezfrom source but it failed/home/pi/RetroPie-Setup/tmp/build/custombluez/build-area/bluetooth_5.48-1~rpi1_all.deb not foundInstalled
custombluezfrom binaries and try to pair a Gaisa controller but it is not working.
The lights on the controller keep flashing for a few seconds and then turn off.
With the commanddmesg -Tit seems that the controller try to connect but it fails[Sun Mar 11 11:32:12 2018] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [Sun Mar 11 11:32:12 2018] Bluetooth: HIDP socket layer initialized [Sun Mar 11 11:32:12 2018] sony 0005:054C:0268.0004: unknown main item tag 0x0 [Sun Mar 11 11:32:12 2018] input: Sony PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:11/0005:054C:0268.0004/input/input3 [Sun Mar 11 11:32:12 2018] sony 0005:054C:0268.0004: input,hidraw2: BLUETOOTH HID v80.00 Joystick [Sony PLAYSTATION(R)3 Controller] on b8:27:eb:eb:7f:b8 [Sun Mar 11 11:33:07 2018] sony 0005:054C:0268.0005: unknown main item tag 0x0 [Sun Mar 11 11:33:07 2018] input: Sony PLAYSTATION(R)3 Controller as /devices/platform/soc/3f201000.serial/tty/ttyAMA0/hci0/hci0:12/0005:054C:0268.0005/input/input4 [Sun Mar 11 11:33:07 2018] sony 0005:054C:0268.0005: input,hidraw2: BLUETOOTH HID v80.00 Joystick [Sony PLAYSTATION(R)3 Controller] on b8:27:eb:eb:7f:b8At your disposal if you want me to try anything else.
Thank you again for your help.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.