Sony DualShock 3 - call for testers: "sixaxis" script module

pjft

@Silent Have you tried re-configuring them in ES, though? That's what then sets up the controls in the remaining emulators - maybe there's something missing there, even though they paired and worked just fine?

Silent

@pjft Yes, I have. One thing worth noting is that libretro joystick configuration shows both pad 0 and 1 as "not connected".

That said, I'll try one more time.

EDIT:
I have repeated the steps (including removing es_input and re-adding onfinish action for it), and it works fine everywhere (including Retropie-Setup and runcommand), but not in game. Interestingly, when launching the game it says "controller connected" but no button works.

EDIT2:
An entry in retroarch-joypads is also being created, so I think there may be something I need to re-set in retroarch configs.

Silent

Update - I tried installing ps3controller driver again and it didn't even want to pair - but thankfully, I had a full SD card backup I made just before swapping drivers (guess I expected problems) and everything works flawlessly now.

So all in all, I am not using this driver yet, but I have a clean starting point I can re-try from at a later point. I'll make use of this opportunity to compare retroarch config files with what I remember from the "broken" install and see if I can find the difference.

EDIT:
I can't find any differences in config files (other than different files in retroarch-joypads, of course). However joypad assignments in Configuration Editor now show PLAYSTATION(R)3 Controller, as expected - after migrating drivers this menu claimed pads are not connected.

edge3000

@Silent Good call making a backup beforehand! The version of sixaxis and related scripts I am running is psyke83's PR test branch of sixaxis, its working great for me. I never had much luck with the up to date RetroPie-Setup version you tried.

These are the steps I did to install it, quoting from earlier in this thread:

@psyke83 said:

You need to be relatively comfortable with using the command-line to test.

These commands will enable the PR branch:
cd RetroPie-Setup
git remote add psyke83 https://github.com/psyke83/RetroPie-Setup
git fetch psyke83
git checkout sixaxis
Make sure to go back to the official branch after testing the PR! Uninstall sixaxis from the menu, then:
cd RetroPie-Setup
git checkout master

Silent

@edge3000 Then the steps are identical, the only difference is that I rebased this PR on top of up-to-date RetroPie-Setup because I didn't want to lose newest Setup features. I may try again without rebasing, however. After all, if it ends up working fine I can restore Setup back to master.

psyke83

@Silent

The hid-sony driver uses a completely different button mapping to the old driver, but also identifies itself with the manufacturer prefix -- so you should look for Sony PLAYSTATION(R)3 Controller.cfg.

Silent

@psyke83 As far as I understand, name doesn't really matter here. I wiped retroarch-joypads when migrating drivers anyway, and I did have a .cfg generated there, the fact whether it had "Sony" prefix or not didn't really bother me.

I do wonder however why I did not have to remap the gamepad after migrating drivers. Perhaps I had some older mappings lingering, as right now (after revert, without sixaxis drivers) I my es_input.cfg has mappings for both PLAYSTATION(R)3 Controller and Sony PLAYSTATION(R)3 Controller. I thought that was my PS3 pads presenting differently, as one of them is from Fat PS3 era, while the other was bundled with PS3 Super Slim and they are in fact a bit different - but that doesn't seem to be the case.

psyke83

@Silent

Even if you never touched this PR, the hid-sony kernel driver is used on the USB connection, which is likely the reason why you already had a mapping (with the Sony prefix). This PR installs a patched version of this driver; if you're on jessie, the mappings will be different from the stock version, but they are identical to the default stretch version.

If you're using jessie, keep in mind that we recently dropped support, so it would be a good idea to upgrade to a stretch-based image regardless of whether you intend to use this PR.

I can't say for sure why the buttons aren't being detected in emulators, but if you are on jessie, it's possible that you still have the old mappings. Manually deleting the Sony mappings and setting up again might fix your issue.

You can try running evtest (from the package of the same name) to check if controller inputs are working correctly, to rule out driver issues.

Silent

@psyke83 I am not on jessie, no - I run an up to date Stretch version. It's just that I used ps3controller until now.

Good call about USB controllers however! That's most likely the reason.

I did remove mappings completely after initially complaining about that in this thread, reconfigured everything, ensured retroarch does indeed have a .cfg file for this joypad - still, no dice, and an inbuilt joypad selection in Configuration Menu showed controllers as "disconnected".

Since I was unable to go back to proper BT connection after uninstalling sixaxis and going back to ps3controller but restoring the SD image made pads work perfectly again even without having to connect them once (which means DS3's themselves were still correctly paired), I am going to give it another try soon. Maybe there is something which didn't work quite right the first time, or maybe I should have explicitly unpaired controllers from ps3controller first.

SleepingDog

Hi, sorry for not fine-combing the thread before posting this. It's 04:20 at night and I can't sleep but need to try, so I thought I'd at least try to get this off my chest.

I have just installed RetroPie, I have an old PS3 controller which I got working. But I don't have a second controller. Tomorrow I thought about buying a new one, problem is PS3 controllers aren't for sale anymore where I live. Only PS4 controllers.

Does this new thing discussed in this thread make it possible to use both a PS3 controller and PS4 controller? What about a PS3 controller and Xbone controller?

Again, sorry for not fine-combing the thread but I need to try and get some sleep. Kind of asking this at the very last minute since I am getting a ride into town tomorrow from a friend to be able to buy a controller. Would suck if I get home and the PS3 controller doesn't work.

So if possible I would be really grateful if someone responded to me very soon before I buy a new expensive controller. >__<

edge3000

@Silent Just to clarify I did start with the fresh Stretch image and did all the updates from RetroPie-Setup before applying the sixaxis PR.

So far I have tested 5 dualshock 3's at once wirelessly and they are stable!

Silent

@edge3000 Right, that's not how I tried indeed - I attempted to set it up on my existing RetroPie installation. I don't really have a spare SD card to try and I don't think I want to replace its contents with a new installation for testing, then restore it from backup again. Was hoping I can try it in a live environment.

Silent

OK, I'm giving this another go on my existing RetroPie installation (Stretch based) - removed ps3controller driver, rebooted and proceeded to installing sixaxis.

Why is custombluez installed automatically with sixaxis, when the instructions say to grab it only if you have third party PS3 controllers?

I'll edit this post with progress as I go by.

EDIT:
So I retraced my steps and results are identical, sadly. EmulationStation works perfectly with the controller (presenting itself as Sony PLAYSTATION(R)3 Controller), reconfigured buttons anyway to be sure and to re-create a RetroArch configuration for it (which it did, \\RETROPIE\configs\all\retroarch-joypads contains Sony PLAYSTATION(R)3 Controller.cfg). Despite all that, libretro joypad assignment (in Configuration Editor in ES) sees the pad as "not connected" and games do not react to it.

Even weirder, starting lr emulators does show Sony PLAYSTATION(R)3 Controller configured on port #0! Bindings don't work at all, though.

Also tried removing and reinstalling retroarch from core packages, no success.

EDIT2:
Tried evtest - every button and axis (including analog triggers) work fine. Which makes sense, considering controller works perfect in EmulationStation.

psyke83

@Silent

Thanks for the information. I've identified the reason why the configuration editor doesn't show the controller as connected; this will be fixed by https://github.com/RetroPie/RetroPie-Setup/pull/2592.

The above problem should only be a cosmetic issue, and still doesn't explain why your controller isn't working in retroarch. Maybe you could zip and upload your retroarch configuration files for me to take a look?

P.S. The sixaxis PR is still in flux, but in the last revision I changed it so that the updated BlueZ stack + patched kernel driver is automatically installed, just so that people testing third-party controllers don't have to go through extra steps. The final version of the PR will only install the package that includes the udev rule and script to handle calibration and idle disconnection.

Silent

@psyke83 Thanks for looking into this, the latest changes sound good!

I have zipped retroarch.cfg, retroarch-core-options.cfg, and config + autoconfig directories from retroarch - is this enough?

https://www.dropbox.com/s/vb8ve63iimed5ax/retroarch-files.zip?dl=0

Do note these configs are from as-is state, without using your latest changes. For those I'll need to restore my SD card again before trying.

psyke83

@Silent said in Sony DualShock 3 - call for testers: "sixaxis" script module:

@psyke83 Thanks for looking into this, the latest changes sound good!

I have zipped retroarch.cfg, retroarch-core-options.cfg, and config + autoconfig directories from retroarch - is this enough?

https://www.dropbox.com/s/vb8ve63iimed5ax/retroarch-files.zip?dl=0

Do note these configs are from as-is state, without using your latest changes. For those I'll need to restore my SD card again before trying.

That was enough - thanks.

It looks like your retroarch.cfg configuration has been improperly edited; look at the first line:

all_users_control_menuall_users_control_menu = "true"

This should be:

all_users_control_menu = "true"

I haven't had time to check everything else, but the above is not the reason for controls not working. It seems that this line is the culprit:

input_axis_threshold = "0.000000"

When I change this to 0.500000 (to match the value in my configuration before I replaced it with yours), my controller works with your configuration.

I'm also seeing retroarch complain about this line:

input_libretro_device_p1 = "5"

This was set to 1 in my configuration, but perhaps this is related to another input device you're using that you didn't mention.

Silent

@psyke83 Amazing, all_users_control_menu and input_axis_threshold indeed helped! (tested them in one batch so I'm unsure if I had to use both or just one). Kinda makes you think why did it work fine with sixad, but I don't think it's something to worry about =)

With that change it seems to work perfectly! However, when doing Moonlight streaming (no reconfiguration was needed! triggers are still analog. Since evtest can report their analog values properly, would it mean that it's just a matter of providing and updated SDL controllerdb entry?

Thanks a lot for your help! I think I will keep using this driver for a while, then just back up my saves, restore SD card from the backup and get a new one when it's updated/finalized. Alternately, I can just keep updating it here since now I know it works :D

edge3000

@psyke83

Does the sixaxis PR have any effect on button mappings or button detection? I know there were big changes recently to the numbers buttons had assigned to them, I'm just not sure if the PR matches the current standard?

(I am on my new Stretch build / rpi3b+ / all updates installed, then Sixaxis PR applied)

The issue I am having is with Advmame 3.9, and dualshock 3 buttons.
In advmame.rc I have it set to "device_joystick event" and Advmame only sees buttons 0 to 10. It won't detect L3, R3, or the d-pad buttons. (which are 11-16) Same thing with it set to auto or raw. d-pad buttons worked fine on my old Jessie/rpi3b/advmame 3.5 build I think because the buttons were assigned lower numbers back then. (I may have been missing all the L and R buttons instead - which for the games I play didn't effect me)

If I set "device_joystick sdl" all the buttons are detected, I thought this was my solution but now I notice a huge 1 minute+ loading time before a game starts, and at least a 5 second freeze every time I exit a game! With it set to event, auto or raw it loads and exits almost instantly.

If I test the controller with jstest all buttons 0 to 16 operate correctly.

Anyway I just wanted to verify if it's related to the PR or just an Advmame issue!
Thanks

psyke83

@edge3000 said in Sony DualShock 3 - call for testers: "sixaxis" script module:

@psyke83

Does the sixaxis PR have any effect on button mappings or button detection? I know there were big changes recently to the numbers buttons had assigned to them, I'm just not sure if the PR matches the current standard?

Yes, the PR will use different mappings to ps3controller. Some emulators may hard-code the older mappings, so I'll take a look at advmame when I get some time.

Other applications such as Kodi will also have issues (I did submit an updated button map for Kodi, but the RPI builds of Kodi18 don't seem to recognize inputs at all for some reason).

PS. Most of the groundwork for this PR has already been merged, but the PR branch still has two important commits that introduce the actual sixaxis service, which has seen updates in the last day. You might want to return to master and then rebase against the latest PR branch to get all the updates.

edge3000

@psyke83 Sounds good, thanks again for your work on this!
I will go back to master and reapply the PR.

I already did my remaps for lr-fbalpha with the PR installed, will they stay the same in the future?
I didn't start my lr-mame2003 remaps yet because that's where I have the most games.

Is there a limit to the number of bluetooth controllers connected at once? I have 10 dualshock 3's available to test it out.

I'm worried that the Motion Sensors being detected might cause lag?
If I run "cat /proc/bus/input/devices" I see Motion Sensors for each dualshock 3.
I remember reading about the udev rule for that, just not sure if that should make them completely hidden?