Multi Switch Shutdown Script!
-
@cyperghost First of all, thank you for this script. It works great with the RetroFlag SuperPi case. But I do have a feature request...
Would it be possible (and sensible?) to add fan control to this? What I mean is a way to disable the fan if the temperatures are below a certain threshold. If the temperature rises, enable the fan until the Pi has cooled down again.
I know the Kintaru Super Ursus 9000 has something like this. I don't know how they've done it, though. I looked at their installer, which executes two BaSh scripts and installs a DEB package:
- https://www.dropbox.com/s/gmziwqpipzpe38l/kintaroinstaller.sh (this script is executed first, it executes the next script)
- https://packagecloud.io/install/repositories/kintaro/pcb/script.deb.sh (seems to install some pre-requisites for the DEB package)
- last, the package
kintarosnes
is installed
I tried to control the fan via
raspi-gpio
but have not been successful, yet. What I was successful at is reading the CPU and GPU temperature and making the PowerLED switch on and off:#!/bin/bash function measureTemps () { local cpuTempC local gpuTempC # header printf "DATE\t\t\t\tCPU\t\tGPU\n" while [ true ] do if [[ -f "/sys/class/thermal/thermal_zone0/temp" ]] then cpuTempCINT=$(cat /sys/class/thermal/thermal_zone0/temp) cpuTempC="${cpuTempCINT:0:2}.${cpuTempCINT:2:1}" else cpuTempC="n/a" fi if [[ -f "/opt/vc/bin/vcgencmd" ]] then gpuTempC=$(/opt/vc/bin/vcgencmd measure_temp) gpuTempC=${gpuTempC:5:4} else gpuTempC="n/a" fi printf "$(date +%FT%T%:z):\t${cpuTempC}\t\t${gpuTempC}\n" sleep 5 done } measureTemps # RetroFlag SuperPi Case # PowerLED OFF # raspi-gpio set 14 op pn dl # PowerLED ON # raspi-gpio set 14 op pn dh
Is my request even possible? I know the fan is connected to the case's PCB, but so is the PowerLED and that can be controlled!
-
@jandalf81 said in Multi Switch Shutdown Script!:
Would it be possible (and sensible?) to add fan control to this?
Well the best solution would be a PWM fan control but I'm not very familar with such things. There are so much possibilities to control fans the easiest way to do this is due an opto-isolator. Then you add an additional GPIO to just power on/off the fan. This works same like the LED control.
But to add this in the script.... No I don't think so. Because you need additional hardware. But your function could be invoked to the loop and will check button action and output CPU temperature.
Sadly you can't control the fan directly through the case.... so as I wrote. You need always additional hardware and I would stay away to directly use GPIOs as power source. The 3,3V line is only capable of 100mA current. Enough for a few LEDs, microcontrollers ... but near the edge to power a 5V fan (imho)
I know the Kintaru Super Ursus 9000 has something like this. I don't know how they've done it, though. I looked at their installer, which executes two BaSh scripts and installs a DEB package:
Looks like PWM control... take a look here
Here someone did PWM control into NESPi caseIs my request even possible? I know the fan is connected to the case's PCB, but so is the PowerLED and that can be controlled!
After long reading here is the short answer: No!
Because:
The LED is directly connected to GPIO14 so this can be controlled
The fan is directly connected to main power.... Can only be controlled like the complete case -- Power Cut!But:
With additional hardware and some new wiring: Yes! -
Thank you very much for your reply! Although that's not the answer I had hoped for I appreciate your time and effort!
Well, I'll just turn the volume up, then... ;-) -
@jandalf81 said in Multi Switch Shutdown Script!:
Well, I'll just turn the volume up, then... ;-)
If the fan is to loud then use following tricks:
-
You can try to connect to 3,3Voltage (that is PIN 1 on Raspberry GPIO header - I don't recommend this)
-
Let it connected to 5V and add two Si-diodes to this
like:
+5V --->|---->|------ FAN
each diode consumes 0,6V-0,7V so you've a drop to 3,8-3,6V and the fan is more silent ;) You can also use resistors but this is a bad way I do not recommend.
-
-
This might not the right forum to be posting this, but no one else seems to want to help and I don't have enough scripting/programming skills to understand your script.
I have my pi partitioned with PINN (Retropie, OSMC and Raspbian) However your script only works on Retropie. I found another script that does work on both OSMC & Raspbian but doesn't shut down the PI completely. The standby light stays on and the fans keep spinning.
I want to add the shutdown_fan part from your script to this script: LINK
#!/usr/bin/python import RPi.GPIO as GPIO import os # hide warning GPIO.setwarnings(0) # connect RPi numbered pin button = 5 # hide warning GPIO.setwarnings(0) # pins setup GPIO.setmode(GPIO.BOARD) GPIO.setup(button, GPIO.IN, pull_up_down=GPIO.PUD_UP) # wait for button press print('Wait for button press...') GPIO.wait_for_edge(button, GPIO.FALLING) # activate system command # Updated to make true safe shutdown w/emustation (incase OSMC has been added) os.system('sudo sleep 5s & sudo shutdown -h now')
From what I understand I need parts from these parts?:
#From shutdown_fan script [ "$1" = "poweroff" ] && raspi-gpio set 4 op pn dl #From multi_switch.sh scipt echo " PowerOnControl GPIO 4 (BCM 4), output, high, power on control!" pack_check raspi-gpio cli_parameter resetbtn= powerbtn= powerctrl= ledctrl= NESPiPlus ${call[@]} function cli_parameter() { unset call local PARAMETER=$@ for i in ${PARAMETER[@]}; do value="${CLI#*$i}" [[ $value != $PARAMETER ]] && value="${value%% *}" || value="-1" [[ $value =~ ^[0-9]{1,2}$ ]] || value="-1" call+=("$value") done }
-
@denisuu Take a look here SHIM ON OFF cut power PART 1
Use this script and set the correct Pins in script. This works -
I tried for more than an hour I really can't get this to work.
In THIS tutorial: Do I copy the content of SHIM ON OFF - PART ONE in part 2.a or 3.a?
I'm also confused with the pin numbers, in the other tutorial he uses pin 5 and in your script it's pin 4 or am I confusing the pin to power down with the button?
-
@denisuu I don't use OSMC so make sure the directory
/lib/systemd/system-shutdown/
is available (I think it is available)So in your tutorial follow steps till 2b
-
sudo nano /etc/rc.local
3.1 add above line exit 0python /home/osmc/shutdown.py &
3.2 or/home/osmc/shutdown.py &
alone can also work ;) -
setup script according to link from me
4.1 change led_pin from 17 to 14
4.2 poweroff_pin = 4 is okay
No... 5 is physical pin 5 = GPIO 3 so magic are the lines
import RPi.GPIO as GPIO ..... GPIO.setmode(GPIO.BOARD)
in the python script. -
-
Thanks for the help, really appreciate it!!!
It's partially working now, now it goes to sleep and the fans keep spinning like in the original script.
I actually have a Retroflag SUPERpi case (on the other 2 scripts it dind't make a difference).the power-switch acts a little funny now. Up is reboot and down is sleep.
All steps done: https://pastebin.com/4QcLQY7M
Edit: It's reacts exactly the same on Raspbian.
-
@denisuu Does the LED blink 3 times? You have to make the gpio shutoff script executable with chmod command. This is essential forget this to mention
Edit it is command
sudo chmod +x /lib/systemd/system-shutdown/gpio-shutoff
-
Yes it blinks 3 times and powers off then after af few seconds turns on again,
or goes to sleep (depending on the possition of the switch).I did make the script executable I forgot to add it to the pastbin. (added it now)
-
@denisuu are there any other scripts running? It is a bit hard to guess but you can try to use the original fan_shutdown script. Please install raspi-gpio with
sudo apt-get install raspi-gpio
-
Ok I removed the old script on Raspbian and installed yours, it works perfectly now!
Only OSMC left, it's really sad it doens't work on OSMC since that's what I use my pi most often for. OSMC doesn't find the package raspi-gpio or npm. Can I just disable the FAN on that partition? Or get raspi-gpio from somewhere else?
Raspbian:
296 cd /home/pi/ 297 ls -alF 298 rm reset.py 299 rm shutdown.py 300 rm /lib/systemd/system/shutdown.service 301 apt install raspi-gpio 302 mkdir /home/pi/scripts 303 cd /home/pi/scripts 304 wget https://raw.githubusercontent.com/crcerror/ES-generic-shutdown/master/multi_switch.sh && chmod +x multi_switch.sh r/multi_switch.sh && chmod +x multi_switch.sh 305 ls -alF 306 sudo nano /etc/rc.local (/home/pi/scripts/multi_switch.sh --nespi+ & before exit 0) 307 cd /lib/systemd/system-shutdown/ && sudo wget https://raw.githubusercontent.com/crcerror/ES-generic-shutdown/master/shutdown_fan && sudo chmod +x shutdown_fan nt.com/crcerror/ES-generic-shutdown/master/shutdown_fan && sudo chmod +x shutdownfan
-
@denisuu I think in OSMC it is easily possible to add that function, too. You can try wiringPi instead - I think that should be available. So every call to raspi-gpio must be translated to a wPi call.
EDIT:
I think you should usesudo apt-get install build-essential
and then you can further start your build -
I deleted half of the scipt and it still works, would it be possible to delete everything I don't need from this? That would make it a lot easier to translate it to WiringPi, since I don't understand half of what the script does.
-
@denisuu You can delete 95% if the script and it will still work. Instead of the raspi-gpio try to translate to wpi calls. Did you try to compile raspi-gpio? https://github.com/RPi-Distro/raspi-gpio
-
@cyperghost I'll try that though I'm pretty new to Linux so that would be a first time compiling anything, good way to learn!
This the most I could delete without breaking functionality. Is it difficult to add the reset button to just reboot?
Retroflag_Raspbian-Shutdown.sh
Danke schön!
-
@denisuu yes that is a stripped down version. Now use the if clause in line 28 and write your reboot command in. You can further strip down this if you want. Take care about the reset value I am not sure what it's default is. 0 or 1 just pretest with echo command.
-
I compiled raspi-gpio on OSMC and the script is working now!!! I wouldn't know how to further strip this down, it's a miracle I even got this far!
The onlything left to do is the reboot button.
When it's finished is it ok if I put them on Github? All credits to you ofcourse!
-
It was just as simple as putting sudo reboot on the line you said! It seems the button doesn't work every time, sometimes I have to press twice but good enough! Maybe it's just the case...
I put this here:
https://github.com/Denisuu/OSMC_NesPi-SuperPi_Safe-ShutdownI haven't linked it anywhere so if you have any objections let me know!
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.