ECWolf - Wolfenstein 3D source port for mods

tpo1990

@cyperghost Yes i noticed when i first tried the applyPatch function, it failed at the end when trying to install ecwolf with a patch failed message.

There is no empty file to be found inside the build folder "$HOME/RetroPie-Setup/tmp/build/ecwolf/ecwolf"

The actual tmp/build folder is empty when i look into it.

cyperghost

@tpo1990 I think the folder automatically gets cleanded up.
But does the applyPatch inside the scriptmodule works?
Because in your first posting you said there was a successfull build.
As far as my understanding is that you usually compare two files
a/sourcedir/testfile.dat
b/sourcedir/testfile.dat

With -p1 you strip to sourcedir/testfile.dat

I used ./sourcedir/testfile.dat and testfile.dat
So with -p1 I also obtain sourcedir/testfile.dat
so I'm sure that the applyPatch function will work ;)

About the path.... Maybe I remebered it wrong (can't test)

Yes the patch command fails if the file ecwolf_keyboardpatch.diff.applied is present. Then an error is added to ouput therefore the file needs to be deleted or you clean up the whole source build with RetroPie-Setup and the option in the dialog menu Z clean build

tpo1990

@cyperghost It does seems to automatically clean up the tmp/builder folder after finalizing the install process of ECWolf scriptmodule.

I haven't noticed any other errors or points that need to be fixed yet. I can not see which file to compare with. Well you can always test it when you get back. For now i can reupload the file with the applyPatch addition.

Usually when the install process fails, it will present a clean source option in the RetroPie-Setup menu for that scriptmodule.

cyperghost

@tpo1990 So the applyPatch function works and you can build a ecWolf binary ;)
Perfect! Then modify the code with the applyPatch function and as you said, upload it
..... I may investigate the helpers.sh script later after my vacation.
Thank you ;)

Usually when the install process fails, it will present a clean source option in the RetroPie-Setup menu for that scriptmodule.

Yes and therefore your modifications works like they should

EDIT:
It's a pleasure to develop with you. Thank you

tpo1990

@cyperghost Okay so i have now uploaded latest change to my git repo for the applyPatch implementation in the ecwolf scriptmodule.

Great at this point i think i will leave the scriptmodule as it is at the moment and later create a PR for RetroPie project.

You too. Thank you as well. :-)

cyperghost

@tpo1990 I took a quick investigation inside the helpers.sh
There is no other function to get files.... So I really have nothing to add here.
Maybe some improvements for the ls command to find the empty dir (ls -A) should be used for portabilty reasons but I think that only a sidenote because we usually build on Raspbian systems.

So my final words. Nothing to add.
For me I learned some new things

{!array[@]} for searching the indexes of an array, usually you probe the value of the index
-print -quit for findcan be very usefull (You have to know that find needs some special treatments for recurse file operations)
Never use ls for listing files and handling them in your script, except you will check if the directory is empty or not
patch -p# this was just an usecase by accident, but did work so far .... I hope my explainations what is the difference between p1 and p0 did not confuse you and I hope the explaination is right ;)

cyperghost

@SinisterSpatula said in OpenBOR 6xxx OpenBeta Testphase:

@cyperghost I'm back to being just an average joe, not making images, not part of a team. I'll get right on this tomorrow :)

Yes but your attitude is correct and I like your tutorials for the GPi case.

Back to topic:
I think we should use this thread for posting ecWolf issues ;)

The ecWolf scriptmodule itself can be considered as RC1 it needs just one or two thing in code polishing (remove the dots for find and downloadAndExtract, add ls -A) but these are just minor things and it should do it's job as expected

SinisterSpatula

Retroflag Gpi/Pi zero Testing

Forward = JY11 (D-pad up)
Backward = JY12 (D-pad down)
Turn left = JY13 (D-pad left)
Turn right = JY14 (D-pad right)
Attack = JY0 (A Button)
Use = JY1 (B button)
Strafe = JY3 (Y button)
Run = JY2 (X button)
Next Weapon = JY10 (LB button)
Prev Weapon = JY9 (RB button)
Escape Game = JY4 (Select Button)
Start button is not being detected when I try to assign it. But it is in fact
working as an ESC button.

I hear a buzzing when I press the B button (JY1/Use) Same buzz if I press Spacebar which is assigned to Use.

The game is showing mouse curson on screen, need to disable that. (even with mouse disabled in controls)

Turning speed and movement speed are great without any change.
Very nice and playable, smooth, fast, good performance, music sounds great, no crackles or static. I did not need to use the --extravbls 2 to get good performance, however when I tried it, it does seem to be slightly better.

I could exit the game just fine.

This plays very nice!

Menu's navigate nicely. B button is working to back out of menu's. A button is working to select a menu item. Only weirdness is if you want to setup inputs the A button is "firing twice" or something, it get's ready to take the input you want to set but then immediately takes A as the new button also. (So there's no way currently other than bluetooth keyboard to setup controls due to this)

Config file here:
https://github.com/SinisterSpatula/Misc/blob/master/ecwolf.cfg

Youtube video here:

tpo1990

@cyperghost Good learning. I have not looked any further into the helpers file other than the applyPatch and downloadAndExtract funciton. I could probably learn a thing or two from it.

Now all that is left is just some further code polishing and then it will be ready for PR.

I agree that all folks here should only post ECWolf or Wolfenstein 3D related issues or posts so that we can maintain a clean topic.

tpo1990

@SinisterSpatula Thank you for this nice review and testing of ECWolf on the Retroflag GPI case. It seems to run very good. :-)

I think your modified ecwolf config file could provide useful to those that use the same case and that it is a good idea to add a link to the extra post that i have reserved at the moment, if i may do so with your accept.

cyperghost

@SinisterSpatula Thank your for this demo. ecWolf seems to run perfect on Pi1/0 then.

I think your button layout is okay. You properly missing the "MAP" options and I think the "SELECT" button is a good one for this.

I hear a buzzing when I press the B button (JY1/Use) Same buzz if I press Spacebar which is assigned to Use.

bzzzz bzzz ... That's the game engine, don't worry

The game is showing mouse curson on screen, need to disable that. (even with mouse disabled in controls)

Yes that's common. I disabled it, by setting mouse controls to off, activated fullscreen. Then the mouse is still showing but will vanish after next restart of ecWolf.

Turning speed and movement speed are great without any change.
Very nice and playable, smooth, fast, good performance, music sounds great, no crackles or static. I did not need to use the --extravbls 2 to get good performance, however when I tried it, it does seem to be slightly better.

Yes the --extravbls 2 sets the CPU usage massive down. On my Raspberry3 the peak CPU usage was 80%, with the switch sette I'm down to 50%. So my biggest concern was that the Pi0/1 is to weak for this game.

I could exit the game just fine.

Yes with START and SELECT button I assume.
because your button layout is ....Start button is not being detected when I try to assign it. But it is in fact working as an ESC button. Therefore I assume that the SELECT button is free mabe for the Automap function ;)

Menu's navigate nicely. B button is working to back out of menu's. A button is working to select a menu item. Only weirdness is if you want to setup inputs the A button is "firing twice" or something, it get's ready to take the input you want to set but then immediately takes A as the new button also. (So there's no way currently other than bluetooth keyboard to setup controls due to this)

Yes that's one of the caveeats now, you neeed a keyboard to navigate and reassign the keyboard layout inside the graphics menu or by using SSH edit. Therefore your premade config is worth to use it for the GPi case. Because not everybody is owner of a Bluetooth keyboard ;)

So thank you again for this nice review. If you need help how to add the fullversions then read description in posting 1. So I caused the usage of these .ecwolf files with the background of giving wolf3d the possibilty as own "system" inside ES.

The .ecwolf files are simple bash scripts. You need to enter the directory with the game data and then you can parse commands to the binary.
/opt/retropie/ports/ecwolf/ecwolf --data wl6 (case sensitive!) will load the full version
/opt/retropie/ports/ecwolf/ecwolf --data wl6 --file ../addons/ECWolf_hdpack.pk3 ../addons/ECWolf_hdmus_3DO.pk3 loads full version in HD mode ;)

More info about my file layout is here

tpo1990

I have created a quick mod install script to make it more easy to install mods into the ECWolf installation. You can find it in the new Extra section in the top of the topic. You can also do this manually by following the instructions for how to install mods in the first post.

The mod install script must be used in Raspbian Desktop with a keyboard, since you will be required to name the mod before it will be installed into ECWolf. You can name the mod with "spaces" as the script has been made sure to work this way.

At the moment it is only one .pk3 file it can handle to install. If you have more than one .pk3 placed in the new ecwolf folder that has been created, it will still create the .ecwolf file and mod.sh file, but it might not move the .pk3 files to the wolf3d roms. For this you can move them manually.

cyperghost

@tpo1990

Some code polishing

You can avoid the additional dot as long as you don't parse additionals parameters to this. Helpers accepts source path and extraction path and shifts these 2 arguments.
So if you use additional parameters they will be shifted!
So I guess following. To just extract to current path just use downloadAndExtract zipfile if you use paramters then USE the destination downloadAndExtract zipfile extractto -parameter1 -parameter2

    downloadAndExtract "https://bitbucket.org/ecwolf/ecwolf/get/5065aaefe055.zip" .
    downloadAndExtract "https://bitbucket.org/ecwolf/ecwolf/get/5065aaefe055.zip"

Edit: I think use the find . command
Do not remove the . because it will strongen suggestions to search in current dir
But maybe some more advanced coders can say more to this.

       ecw=$(find . -iname "*.$game" -print -quit)

This may be answered by @hhromic
Because filename changes can be usefull do not collide with current Wolfenstein ports.
So I can't tell if this will higher the changes of a successfull PR or not - I think in the long term ecWolf could take advantage over Wolf4SDL. The ecWolfenstein name is just my idea not set to stone... be creative ;)

    declare -A games=(
        ['wl1']="Wolfenstein 3D (demo)"
        ....
        ['sd3']="Wolfenstein 3D - SoD MP3 - Ultimate Challenge"
    )

    declare -A games=(
        ['wl1']="ecWolfenstein 3D (demo)"
        ....
        ['sd3']="ecWolfenstein 3D - SoD MP3 - Ultimate Challenge"
    )

Code polishing your modscript .....

Better us a bash builtin

for i in *.pk3; do
   mv "$i" .....
   filenames="$filenames $i"
done

cat.... EOF
--file $filenames
EOF

Using ls is the worst you can do ;)
You will see if you have to fight with globbing, special characters and other bash versions.
My code example resolves your issue with several pk3 files.
But this is only one way in doing something. If you use [P][p][K][k]3 then file extension does not care about upper/lower cases... ;)

tpo1990

@cyperghost The downloadAndExtract command fails if i don't include the additional dot.

Error:

Error running 'unzip https://bitbucket.org/ecwolf/ecwolf/get/5065aaefe055.zip -o /tmp/tmp.GYUrhHrEWg/5065aaefe055.zip -d ' - returned 9

At least i can try to set up a PR and see how it goes. I have already managed to make the Hexen 2 scriptmodule apply after the RetroPie's scriptmodule guidelines and months have passed by without been merged.

Thank you. I was not aware that using ls is bad practice. I will try out your suggestion for the modscript. Also it is a bonus if it can handle more than one pk3 file. :-)

cyperghost

@tpo1990 Oh.... For me it worked without additonal dot but I've an older version of the RetroPie-Setup. Sorry for bothering you.

About the hexen2 branch ... Yes I know it's a long time ago you setted this PR. Don't know what's wrong here. Maybe you need to explain how the GL binary of hexen works?

About scripting:
Yes there are some don'ts in ParsingLS
ls is fine if you want to check if the directory contains some data. I consider ls as command for human input, not for mashines.

To check for a specfic file/directory you can always use the test command (= [[ ... ]])
and the mother of search is the findcommand but you really need to know the foe.
So the simplest way is imho the for i in filename loop.

And even the internet is full of errors ;)
Here is a good tip to delete your whole mashine by accident (see last answer)

tpo1990

@cyperghost No problem, i was not aware that it worked before updating the version of the RetroPie-Setup. At this moment it does not so i will keep the additional dot. :-)

The hexen2 PR was actually reviewed by joolswills and hhromic. hhromic helped me with making the scriptmodule ready so that the PR can be merged with the RetroPie project. hhromic did state that the PR is ready to merge, but no given answer by joolswills yet.

Oh yes the internet can be surprising without a doubt. :-)

tpo1990

I have updated the install mod script with your best practice and made it work with multiple .pk3 files. It only works for full Wolfenstein 3D .wl6 files. I did get it working for the demo versions as well, but decided not to make that change since it would give you this message when the mod script was used: /home/pi/RetroPie/roms/ecwolf: is a directory. . :-)

Just a little question since i don't know how to do it, how do you highlight text with "red" color in your posts?
For example this line: "ls"

cyperghost

@tpo1990 The is simple Markdown the red code inside are just backticks `` with some code inside.

Yes I saw your script ;)
Yes the script "fails" if there are no pk3 files then *.pk3 will be used as argument.
You can achive a for loop like this, too
for i in file.a file.b with fixed arguments.

Use shopt parameter and use 2.2
Secure your loops and the output (I prefer this one)
2.1 test the file inside the the loop with [[ -f "$i" ]] || continue
2.2 set a second testcommand like [[ -n "$filenames" ]] || { echo "Error: No additional pk3-files found in $PWD"; exit; }

for i in *.pk3; do
   [[ -f "$i" ]] || continue
   mv "$i" "$HOME/RetroPie/roms/ports/wolf3d"
   filenames="$filenames \"$i\""
done
[[ -n "$filenames" ]] || { echo "Error: No additional pk3-files found in $PWD"; exit; }

EDIT:
The escape could be needed in following cases. A pk3-file named The best mod.pk3 would be resolved as --file The best mod.pk3 Now you are parsing 3 files to the switch. So it's better to parse --file "The best mod.pk3"

I'm not aware how often pk3 files are splitted by spaces but it's better imho to escape the files. Easiest technique is escaping the quotes, so they are preserved. Or you push the filenames in a new array.

SinisterSpatula

@tpo1990 said in ECWolf - Wolfenstein 3D source port for mods:

@SinisterSpatula
I think your modified ecwolf config file could provide useful to those that use the same case and that it is a good idea to add a link to the extra post that i have reserved at the moment, if i may do so with your accept.

Yes, of course! :)

ExarKunIv

@tpo1990 great work with all of this

i just cant get the mods to lunch with your new mod installer.
i followed the easy instructions but they will not launch.

im trying Claw of Eisenfaust and the file looks right

cd "."
"/opt/retropie/ports/ecwolf/ecwolf" --data WL6 --file  wolf3d_coe_v2.pk3
wait

but it will not launch
any thoughts?

side note. any idea on how i can check to make sure i have version 1.4 cuz i have no clue