Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

Powerblock Pi4 Power Supply Connector



  • Re: Powerblock Pi4

    Hello! I received the PowerBlock I ordered on 9/12, which is supposed to be compatible with the Pi4. However, the USB power supply for the Pi4 is USB C, which is not the connector on the PowerBlock. Can I use an adapter without blowing up anything? Also, do the drivers need to be installed before installing the hardware? Thanks! (apologies if this has been asked before, but I could not find it in the forums.)


  • Global Moderator

    You can either use a USB micro cable and according power supply or use a USB C cable with a USB micro adapter. Both is possible and you will not blow anything!

    You should install the drivers after installing the hardware.

    Hope that helps!



  • @petrockblog Thanks so much!


Log in to reply
 

Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.

Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.