Laptop install, cant stop keyboard from being player 1 on PSX

Clyde

That should be all, actually. And you really don't have an entry „Joystick Selection“ under „Retropie“ in Emulation Station afterwards? You should have these files:

/home/pi/RetroPie/retropiemenu/joystick_selection.sh
/home/pi/RetroPie/retropiemenu/icons/joystick_selection.png
/opt/retropie/configs/all/joystick-selection.cfg
/opt/retropie/supplementary/joystick-selection
/opt/retropie/supplementary/joystick-selection/joystick_selection.sh
/opt/retropie/supplementary/joystick-selection/jsfuncs.sh
/opt/retropie/supplementary/joystick-selection/jslist                                                                                                                                                                                              
/opt/retropie/supplementary/joystick-selection/retropie.pkg

edit: You can list all related files and directories with this command:

locate "joystick" | grep --color=never selection

(I chose this over a simple locate joystick-selection to get the "joystick_selection" with an underscore, too. The --color=never is to avoid the coloured output from grep.)

xboxiso

@Clyde I looked and can't find these directories on my system. I installed this by entering the above mentioned line in terminal. RetroPie was not running. Was I supposed to add that line in RetroPie somehow?

xboxiso

I just tried it again and can't find those files.

Attached is a screenshot of the output after running that code.

Clyde

If the output remains like this for a longer time (5-10 minutes), it seems that the installer hangs or otherwise doesn't finish.

You could try to execute both commands that are separated with the | one after another:

wget "https://raw.githubusercontent.com/meleu/RetroPie-joystick-selection/master/install.sh"

(mind the missing -O-)

sudo bash install.sh

xboxiso

Thank you again for all of your help. I will try executing these commands separately. Hopefully this works. : )

xboxiso

Here is the output I get when attempting to run the above referenced script:

Clyde

It says that curl is not installed. You can install it with

sudo apt install curl

xboxiso

After installing curl it worked. I was able to run this tool. Unfortunately it did not solve my problem as the keyboard still shows up as controller port one no matter what I do. I think this must be an issue with Sony Vaio laptops. I installed RetroPie X86 on an HP laptop last night and did not run into this issue at all. The keyboard on the HP does not show up as a controller in RetroPie with that laptop. Unfortunately this may be a lost cause.

I do really appreciate all of the help you have provided and we did succeed in installing this software on my laptop, it just did not seem to resolve the issue. Thank you for all of your help.

kevin55605

Hi

Just attempting my first install , on Ubuntu 18.04...on a Sony Laptop of all things.
Being a newb I couldn't figure out what I was doing wrong...I'd discovered all of the things suggested above (swapping controller ports etc) in other posts or searches...nothing worked. When I found this post I was almost glad to see it wasn't just me :)

I'd just like to add that I was able to resolve this by blacklisting the "sony_laptop" module. This will disable the "Sony_Vaio_Keys" device that appears as a joystick (I suspect these are the "special" keys for brightness,volume,enable-disable wifi, etc). Not sure what else this will disable, but it seems to work.

Hope this helps.

I

Clyde

@kevin55605 Thanks for sharing your findings.