new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!)

DTEAM

Nice work you did !!!
I have use generate-desired-systems.sh for lr-mess handheld systems and It works like a charm.

You should find a way to put that on the official Retropie setup. It’s the best way I ever seen to have an easy access to lr-mess systems.

On my side, I'm working on MAME artwork for lr-Mess handheld console. A lot already exist but somes are missing like Gamate, GameMaster, Pocket Station, SVMU and GP32. I did Gamate and GameMaster. I'll do Pocket Station, SVMU and GP32 this week.

I'll share those when It will be finished.

Folly

@dteam said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly

Nice work you did !!!

Thank you for the compliment.

I have use generate-desired-systems.sh for lr-mess handheld systems and It works like a charm.

I astounded myself too.
It works even better than I ever could imagine.

You should find a way to put that on the official Retropie setup. It’s the best way I ever seen to have an easy access to lr-mess systems.

Well, for the future I it could be a possibility, but before that, there can be added much more functionality.
You have to know that, for now, my script is just automating the @valerino stuff.
So basically we don't have to make the seperate system scripts anymore.
But for the basic idea, the credits go to @valerino . It all depends on his run_mess.sh script.
There has already been some discussion about intergrading Valerino's scripts into the official RetroPie-Setup here :
https://retropie.org.uk/forum/topic/27837/integrating-lr-mess-quasi-cores-into-retropie-setup

So I think, before that happens, there is still a lot to be done to make it approved somehow.

On my side, I'm working on MAME artwork for lr-Mess handheld console. A lot already exist but somes are missing like Gamate, GameMaster, Pocket Station, SVMU and GP32. I did Gamate and GameMaster. I'll do Pocket Station, SVMU and GP32 this week.

I'll share those when It will be finished.

Nice ! , I am looking forward to that.
Then I have to install a bunch more. I hope I have the time for that.

ps. updated the script : now the .zip extension is always added in the generated script. So .zip files will appear in emulationstation.

DTEAM

I have work on MAME artwork for lr-Mess handheld consoles. A lot already exist but somes was missing like Gamate, GameMaster, Pocket Station, SVMU and GP32. I did those and I combined them with existing ones in a folder (click this link)

Those Artworks have multiple view. Here is a small tutorial to use the lr-mess artworks on Retropie and be able to switch quickly from one view to another.

1 - Copy files from here to /home/pi/RetroPie/BIOS/mame/artwork You will have to create the artwork folder.

2-Install a handheld system with Folly script (above method)

HANDHELD SYSTEMS LIST
advision
gamate
gameboy
gamecom
gamegear
gamepock
gba
gbcolor
gbpocket
gmaster
gp32
lynx
megaduck
microvsn --------> No handheld systems artwork found - to found or to do
ngp
ngpc
pockstat
pokemini
svision
svmu ~~--------> some issues with artwork, It works on a 5inch screen but not on a regular TV~~ issue solved
vectrex
wscolor
wswan

3- Choose a system and select the good Mess system/emulator line when your game load.

4- Connect a keyboard (only the first time). In the game, press Tab and go in (Input (general)) and User Interface.

5 - Set Right Thumb as (Config Menu) and Left Thumb as (UI Cancel). With that, you will be able to go quickly in and out the menu. To select It’s B or A Button but It’s already set . Maybe you will have to set up-down-left-right. Because It's lr-Mess, you can't config some buttons. Do It, with right and left thumb or Left trigger and Right Trigger only.

6 - Now, you can go back to video options and select the view you want. Don't forget to set Input (this Machine) to set your game controller if It's not done properly.

Folly

@dteam

I hope I can install your artwork soon. :-)

Here an update on my script :

I keep my stable version online.

Today I finished my test version.
It took me about 14 hours to take it this far and I am quite happy about it.
If all goes to plan, I will put it on github this evening.
I will call it :
generate-lr-mess-systems-1v3-alpha.sh

I think I have made a quite unique function to match MESS/MAME names to RetroPie names.
I am quite impressed on how this works. ;-)
I have only tested this with single system creations,
but I think it will do most with no problem.
(or at least I hope so)

Only the system name "PC" is a problem and perhaps I forgot some system.
That is why it's in an alha testing state.
Perhaps more problems arise.

It will output names (a bit shorter, for now I keep "gen" in it, to distingquish between original valerino and my generated versions):
gen-lr-mess-<RetroPiename>-<MESSname><-media>.sh

Can you test this version a bit for me ?

DTEAM

@folly said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

Can you test this version a bit for me ?

with generate-desired-systems.sh

I had an issue with SVMU artwork. I'll try to fix It. It works on a 5inch screen but not on a regular TV

Folly

@dteam

Did a fix on neogeo :
Added memc media in the filter for detecting neogeo.

DTEAM

@folly said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

ps. updated the script : now the .zip extension is always added in the generated script. So .zip files will appear in emulationstation.

.7z extension could be also add to es_systems.cfg.

It works. The names are doubled like:

lr-mess-snes-snes-cart or
lr-mess-a5200-a5200-cart

Not the purpose, but just to know:

Nes (good performance)
SNES won't load (BIOS issue)
a2600 (good performance)
a5200 (screen view to set)
N64 run at 25 FPS (really slow)
32x (won't load , probably bad romset)
3DO (stop on 3DO screen, but not freeze)

I confirm, the names are matching between Retropie and MAME. It works!

Folly

@dteam said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

ps. updated the script : now the .zip extension is always added in the generated script. So .zip files will appear in emulationstation.

7z. ext. could be also add.

Indeed, was thinking about that. I can implement this.
EDIT : .7z is added in the scripts now.

It works. The names are doubled like:

lr-mess-snes-snes-cart or

lr-mess-a5200-a5200-cart

EDIT : I see now Atari 5200 does not have the right name, will try to fix this
(EDIT: checked it, I have a good file (no issue): gen-lr-mess-atari5200-a5200-cart.sh)

Yes that is correct. Both names are in the filemame :
gen-lr-mess-<RetroPiename>-<MESSname><-media>.sh
Perhaps there is a better way of naming.
We can discuss that.
For now I did this to check The RetroPie names against the MESS name.
(EDIT: now it was already usefull to detect an issue with a5200)
(EDIT: checked it, I have a good file (no issue): gen-lr-mess-atari5200-a5200-cart.sh)
In these examples they are both the same.
But with others they aren't.
With msx you get something like this :
msx-hbf700p-flop1 quite usefull, I think.

Not the purpose, but just to know:

Nes (good performance)
SNES won't load (BIOS issue)
a2600 (good performance)
a5200 (screen view to set)
N64 run at 25 FPS (really slow)
32x (won't load , probably bad romset)
3DO (stop on 3DO screen, but not freeze)

I confirm, the names are matching between Retropie and MAME.

Thanks for already testing a bit !

I downloaded the artwork and tested it on gameboy.
The artwork works oob. Nice job.

Only my space ship was toooo fast, Game over ^^

Folly

@dteam said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

bash generate-lr-mess-systems-1v3-alpha.sh nes
bash generate-lr-mess-systems-1v3-alpha.sh a2600
bash generate-lr-mess-systems-1v3-alpha.sh a5200
....

Perhaps you know. Perhaps others don't.
But this is also nice in the terminal.

Just copy and past the multiple lines will do the job also.
Isn't that great. ;-)

TPR

I'm trying to install GSPlus but I'm running into the following error. Any ideas? Thank you.
GSplus error.jpg

Folly

@tpr said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

I'm trying to install GSPlus but I'm running into the following error. Any ideas? Thank you.

You did not add much info to your problem.
But it seems like you are installing the standalone gsplus from source (original valerino)

Tried this for you now, I have the same error (using Raspberry Pi OS Buster on pi4)
You have to read your specific/latest log in to find out more :
/home/pi/RetroPie-Setup/logs
In my log => fatal error: readline/readline.h file does not exist.
So it seems to be a fault in the source code.
So the compilation is terminated and thats why the binary isn't found.

The script gets his sourcode from :
https://github.com/digarok/gsplus

Folly

@DTEAM

I want to discuss the BIOS directory for my generated scripts.

For my script I was thinking to change the BIOS directory so all lr-mess bios files go in there. Just to seperate them from the others. What do you think of that idea ?

So the lr-mess-bios directory is going to be something like :
/home/pi/RetroPie/BIOS/lr-mess
(perhaps there is a better way)

I think it's also possible to separate them on mess names, so we get a be view on what is where. Like this :
/home/pi/RetroPie/BIOS/lr-mess/<MESSsystem>

I don't know if I change it in the script, if this will work directly.
But if it works, what do you think of this idea ?

TPR

@folly I have added that file from the source but I'm still getting errors. This is what my log currently tells me:

[ 16%] Building C object bin/atbridge/CMakeFiles/atbridge.dir/port.c.o
[ 18%] Linking C static library libatbridge.a
[ 18%] Built target atbridge
[ 20%] Linking C executable to_pro
[ 20%] Built target to_pro
make: *** [Makefile:84: all] Error 2
/home/pi
Could not successfully build gsplus - Apple II/GS emulator (/home/pi/RetroPie-Setup/tmp/build/gsplus/bin/GSplus not found).

Any further help would be appreciated. Thank you.

TPR

@roslof I've been trying to get GSplus up and running and have everything you've mentioned in this post except for this: GSOS6.0.1.img

I can't seem to find any reference to this or videos on how to make one by Googling it. Any help would be appreciated. Thank you.

I'm trying to run something like "Thexder" and I have the gsp and the 2mg files in the correct place according to the gsp file but I don't have that .img file that you mention.

Folly

@TRP

Just found the solution.

The package depends on libreadline-dev (GNU readline)
If installed on linux it will find the readline.h on your computer.
I manually compiled gsplus and this worked.

I checked also some gsplus forks.
This fork has updated the apt install <dependancies> in the readme.md :
https://github.com/daehahn/gsplus

Add these in the script on line 19 (/home/pi/RetroPie-Setup/scriptmodules/emulators/gsplus.sh) :

getDepends libsdl2-dev libsdl2-image-dev re2c libfreetype6-dev libpcap0.8-dev libreadline-dev

Try to install again.
It should work now.

If this works someone could do a pull request or send an issue on valerino's github.

ps. When you have it working , can you share some info here?
How to run images etc. or get Thexder to run. I am also new to gsplus.
(It boots but I don't know how to load things)

TPR

@folly Thanks. I don't have a script editor to tell me what line 19 is but in Wordpad I counted the lines and I added it here:

rp_module_flags=""

function depends_gsplus() {
getDepends libsdl2-dev libsdl2-image-dev re2c libfreetype6-dev libpcap0.8-dev libreadline-dev
}

function sources_gsplus() {
gitPullOrClone "$md_build" https://github.com/digarok/gsplus
}

Wish me luck!

TPR

This post is deleted!

TPR

@folly Yeah, I think Retropie-Setup really didn't like that and I'm still getting the same error...

TPR

@folly Can you post your version of gsplus.sh somewhere so I can try it?

Folly

EDIT : (22-12-2020) Problem has been solved now in the original fork of @valerino.

@tpr said in new scriptmodules (lr-vice-xvic, gsplus, proper lr-mess integration!):

@folly Can you post your version of gsplus.sh somewhere so I can try it?

I pushed the file to my github, so you can try.
Hope it works for you.

cd /home/pi/RetroPie-Setup/scriptmodules/emulators
wget --backups=1 https://raw.githubusercontent.com/FollyMaddy/RetroPie-Share/main/00-scriptmodules-00/emulators/gsplus.sh

(EDIT: fixed above line, now it will overwrite the gsplus.sh and make a backup of the old file)

or download this repository and extract the file :
https://github.com/FollyMaddy/RetroPie-Share