RetroArch Help Request :

escc1986

@ReadyPlayaWon

thank you for that

you absoultly right , not much i can do ...

should i remove the all/retroarch.cfg

or

should i do a fresh clean start ?

mitu

@escc1986 said in RetroArch Help Request ::

should i remove the all/retroarch.cfg

No, you shouldn't - this will break the other systems that are working right now.

Please provide the info asked in https://retropie.org.uk/forum/topic/3/read-this-first and also a detailed (verbose) log from running a dreamcast game, as mentioned in that topic.

escc1986

@mitu

Pi Model or other hardware: (B, B+, 2 B, 3, X86 PC etc..) : pi 4 B

Power Supply used: (If using a Pi) Official power supply 5.1 3A

RetroPie Version Used (eg 3.6, 3.8.1, 4.1 - do not write latest): 4.6
Built From: Pre made SD Image on RetroPie website

USB Devices connected: keyboard , Nes Controller , dolphin bar

Controller used: NES controller

Error messages received:
Verbose log (if relevant):

Parameters: 
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-flycast/flycast_libretro.so </dev/null --config /opt/retropie/configs/dreamcast/retroarch.cfg "/home/pi/RetroPie/roms/dreamcast/_Naomi Rail Shooters/ninjaslt.zip" --appendconfig /dev/shm/retroarch.cfg
[CDROM] No sg devices found and sg kernel module is not loaded.
/opt/retropie/supplementary/runcommand/runcommand.sh: line 1255:  1989 Illegal instruction     /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-flycast/flycast_libretro.so --config /opt/retropie/configs/dreamcast/retroarch.cfg "/home/pi/RetroPie/roms/dreamcast/_Naomi Rail Shooters/ninjaslt.zip" --appendconfig /dev/shm/retroarch.cfg < /dev/null

Emulator: (Name of emulator - if applicable) ir-flycast

ReadyPlayaWon

This post is deleted!

escc1986

@ReadyPlayaWon

good advise to back up the sd every week or so ;)

will keep that in mind

mitu

@escc1986 said in RetroArch Help Request ::

Verbose log (if relevant):

This is not a verbose log, just a normal log file. Make sure you toggle verbose logging in the runcommand launch menu when starting the game.

escc1986

@mito where do i find in ssh the Verbose log ?

ReadyPlayaWon

@escc1986

from the runcommand menu select "L" Launch with verbose logging

then using WINScp or PuTTy ... ssh into RetroPie and then log file is in

/dev/shm/run/runcommand.log

output will look something like this ... (i'm running Guilty Gear Isuka using lr-flycast)

Parameters: 
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-flycast/flycast_libretro.so </dev/null --config /opt/retropie/configs/atomiswave/retroarch.cfg "/home/pi/RetroPie/roms/atomiswave/ggisuka.zip" --verbose --appendconfig /dev/shm/retroarch.cfg
[INFO] RetroArch 1.8.5 (Git 8bcd74b)
[INFO] Redirecting save file to "/home/pi/RetroPie/roms/atomiswave/ggisuka.srm".
[INFO] Redirecting savestate to "/home/pi/RetroPie/roms/atomiswave/ggisuka.state".
[INFO] === Build =======================================
[INFO] Capabilities:  NEON VFPv3 VFPv4
[INFO] Built: Apr 20 2020
[INFO] Version: 1.8.5
[INFO] Git: 8bcd74b
[INFO] =================================================
[INFO] Loading dynamic libretro core from: "/opt/retropie/libretrocores/lr-flycast/flycast_libretro.so"
[INFO] [Overrides] no core-specific overrides found at /home/pi/.config/retroarch/config/Flycast/Flycast.cfg.
[INFO] [Overrides] no content-dir-specific overrides found at /home/pi/.config/retroarch/config/Flycast/atomiswave.cfg.
[INFO] [Overrides] game-specific overrides found at /home/pi/.config/retroarch/config/Flycast/ggisuka.cfg.
[INFO] Config: appending config "/home/pi/.config/retroarch/config/Flycast/ggisuka.cfg"
[CDROM] No sg devices found and sg kernel module is not loaded.

escc1986

@ReadyPlayaWon

thank you for explaing , its late here need to get some rest , will report back here in the morning

escc1986

I slept on it

There was nothing I could do , I tried a lot of things I think I completely ruined the whole RetroArch.cfg

I just decided to start from scratch with a fresh new start

I will be tweaking and orginizing my Pi all day

If I come across any issues I will post in the forums

Than you both for all the help

Appreciate it