No Games will load
-
@mitu ok there are now 3 files in there
-
@mitu video_refresh_rate = "60"
arcade
lr-mame2003
/home/pi/RetroPie/roms/arcade/asteroid.zip
/opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003/mame2003_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/asteroid.zip"Parameters:
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003/mame2003_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/asteroid.zip" --appendconfig /dev/shm/retroarch.cfg
/opt/retropie/supplementary/runcommand/runcommand.sh: line 1285: 1678 Segmentation fault /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003/mame2003_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/asteroid.zip" --appendconfig /dev/shm/retroarch.cfg -
@ken-tipton said in No Games will load:
/opt/retropie/supplementary/runcommand/runcommand.sh: line 1285: 1678 Segmentation fault /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003/mame2003_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/asteroid.zip" --appendconfig /dev/shm/retroarch.cfg
This looks like a bad ROM. If it worked before, then try re-copying the ROM file and see if it starts working again.
-
@mitu it was working fine. If I go to Retrorarch and look at past games played and launch from there is loads. but any game I try and run from main menu will not load
-
arcade
lr-mame2003
/home/pi/RetroPie/roms/arcade/dkong.zip
/opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003/mame2003_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/dkong.zip"Parameters:
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003/mame2003_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/dkong.zip" --appendconfig /dev/shm/retroarch.cfg
/opt/retropie/supplementary/runcommand/runcommand.sh: line 1285: 2456 Segmentation fault /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mame2003/mame2003_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/dkong.zip" --appendconfig /dev/shm/retroarch.cfglooks like same error
-
As I said, try copying again the ROM archive file and see if it works. You can get more info by enabling verbose logging from the Runcommand launch menu.
-
@mitu thank you will try again in the morning. Your help is greatly appriciated
-
says it is corrupt and missing files don't know what happened or why all my games are like this
[libretro INFO] [MAME 2003] Opening ROM file: 035145.02
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip
The zipfile seems to be corrupt, please check it
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip: Empty file
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip
The zipfile seems to be corrupt, please check it
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip: Empty file
[libretro ERROR] [MAME 2003] 035145.02 NOT FOUND
[libretro INFO] [MAME 2003] Opening ROM file: 035144.02
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip
The zipfile seems to be corrupt, please check it
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip: Empty file
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip
The zipfile seems to be corrupt, please check it
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip: Empty file
[libretro ERROR] [MAME 2003] 035144.02 NOT FOUND
[libretro INFO] [MAME 2003] Opening ROM file: 035143.02
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip
The zipfile seems to be corrupt, please check it
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip: Empty file
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip
The zipfile seems to be corrupt, please check it
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip: Empty file
[libretro ERROR] [MAME 2003] 035143.02 NOT FOUND
[libretro INFO] [MAME 2003] Opening ROM file: 035127.02
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip
The zipfile seems to be corrupt, please check it
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip: Empty file
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip
The zipfile seems to be corrupt, please check it
[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip: Empty file
[libretro ERROR] [MAME 2003] 035127.02 NOT FOUND
[INFO] [Environ]: SET_MESSAGE: Required files are missing, the game cannot be run.[libretro ERROR] [MAME 2003] Required files are missing, the game cannot be run.
[libretro ERROR] [MAME 2003] readroms failed
[ERROR] Failed to load content
[INFO] Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] Unloading game..
[INFO] Unloading core..
[INFO] Unloading core symbols..
[INFO] [Core Options]: Saved core options file to "/opt/retropie/configs/all/retroarch-core-options.cfg" -
@ken-tipton said in No Games will load:
says it is corrupt and missing files don't know what happened or why all my games are like this
Corrupted SD card maybe ?
-
I have banged my head on this one. If I go to retroarch and go to history and select a game I previously played from there. (in this case Astroids) it loads fine with all previous high scores intact. if I go from game menu I get nothing
-
@ken-tipton Are you sure you're loading the same
.zip
file ? The previous log shows the file is empty:[libretro ERROR] [MAME 2003] Error in zipfile asteroid.zip: Empty file
-
@mitu yes I am. I looked in the folder and as you said it was empty. I don't know why it was empty. I looked at the one on my desktop and it had 4 txt files in it. every time I would drag it to the Raspberry Pi and look in the folder it would be empty. I then deleted the folder completely from both the PI and my computer and downloaded a new rom and loaded that to the PI. The files stayed in the folder that time but still failed to load.
-
@ken-tipton Power fluctuation? Like a loss of electricity during a storm or a brown-out? Maybe something got corrupted (or hardware suddenly failed) without you knowing.
-
@iandaemon just checked and all other emulators work as they should it is only my arcade folder utilizing MAME games.
-
Here is another game. All of them do the same thing.
Parameters:
Executing: /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-fbneo/fbneo_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/1942.zip" --verbose --appendconfig /dev/shm/retroarch.cfg
[INFO] RetroArch 1.8.8 (Git 9552f87)
[INFO] Redirecting save file to "/home/pi/RetroPie/roms/arcade/1942.srm".
[INFO] Redirecting save state to "/home/pi/RetroPie/roms/arcade/1942.state".
[INFO] === Build =======================================
[INFO] Capabilities: NEON VFPv3 VFPv4
[INFO] Built: Mar 27 2021
[INFO] Version: 1.8.8
[INFO] Git: 9552f87
[INFO] =================================================
[INFO] Loading dynamic libretro core from: "/opt/retropie/libretrocores/lr-fbneo/fbneo_libretro.so"
[INFO] [Overrides] no core-specific overrides found at /home/pi/.config/retroarch/config/FinalBurn Neo/FinalBurn Neo.cfg.
[INFO] [Overrides] no content-dir-specific overrides found at /home/pi/.config/retroarch/config/FinalBurn Neo/arcade.cfg.
[INFO] [Overrides] no game-specific overrides found at /home/pi/.config/retroarch/config/FinalBurn Neo/1942.cfg.
[INFO] [Remaps]: remap directory: /home/pi/.config/retroarch/config/remaps
[INFO] Redirecting save file to "/home/pi/RetroPie/roms/arcade/1942.srm".
[INFO] Redirecting save state to "/home/pi/RetroPie/roms/arcade/1942.state".
[INFO] [Environ]: GET_LOG_INTERFACE.
[INFO] [Environ]: UNSUPPORTED (#62).
[INFO] Content loading skipped. Implementation will load it on its own.
[libretro INFO] Setting save dir to /home/pi/RetroPie/roms/arcade/
[INFO] [Environ]: SYSTEM_DIRECTORY: "/home/pi/RetroPie/BIOS".
[libretro INFO] Setting system dir to /home/pi/RetroPie/BIOS
[INFO] [Environ]: SET_CONTROLLER_INFO.
[libretro INFO] Initialize DIP switches.
[INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_INTL.
[libretro INFO] [FBNeo] Searching all possible locations for romset 1942
[libretro INFO] [FBNeo] No patched romset found at /home/pi/RetroPie/BIOS/fbneo/patched/1942
[libretro INFO] [FBNeo] Romset found at /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] No romset found at /home/pi/RetroPie/BIOS/fbneo/1942
[libretro INFO] [FBNeo] No romset found at /home/pi/RetroPie/BIOS/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name srb-03.m3 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name srb-04.m4 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name srb-05.m5 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name srb-06.m6 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name srb-07.m7 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-01.c11 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-02.f2 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-08.a1 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-09.a2 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-10.a3 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-11.a4 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-12.a5 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-13.a6 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-14.l1 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-15.l2 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-16.n1 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sr-17.n2 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-5.e8 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-6.e9 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-7.e10 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-0.f1 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-4.d6 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-8.k3 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-2.d1 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-3.d2 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-1.k6 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] Using ROM with good CRC and name sb-9.m11 from archive /home/pi/RetroPie/roms/arcade/1942
[libretro INFO] [FBNeo] No missing files, proceeding
[libretro INFO] [FBNeo] Samplerate set to 48000
[libretro INFO] [FBNeo] Applied dipswitches from core options
[libretro INFO] [FBNeo] Initialized driver for 1942
[libretro INFO] [FBNeo] Adjusted audio buffer to match driver's refresh rate (60.000000 Hz)
[libretro INFO] [Cheevos] System RAM set to 0xf3dda8, size is 9344
[INFO] [Environ]: SET_ROTATION: 1
[INFO] [Environ]: SET_PIXEL_FORMAT: XRGB8888.
[libretro INFO] [FBNeo] Driver 1942 was successfully started : game's full name is 1942 (Revision B)
[INFO] Skipping SRAM load..
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Cheats]: Load game-specific cheatfile: /home/pi/.config/retroarch/cheats/FinalBurn Neo/1942.cht
[INFO] [Audio]: Set audio input rate to: 48000.00 Hz.
[INFO] [Video]: Video @ 504x672
[INFO] [Video]: Starting threaded video driver ...
[INFO] [EGL] Falling back to eglGetDisplay
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x1.
[INFO] [GL]: Found GL context: videocore
[INFO] [GL]: Detecting screen resolution 1920x1080.
[INFO] [EGL]: eglSwapInterval(1)
[INFO] [GL]: Vendor: Broadcom, Renderer: VideoCore IV HW.
[INFO] [GL]: Version: OpenGL ES 2.0.
[INFO] Querying EGL extension: KHR_image => exists
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ...
[INFO] [GLSL]: Compiling ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling simple ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling modern snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling bokeh shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snowflake shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] Shader log: Compiled
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
/opt/retropie/supplementary/runcommand/runcommand.sh: line 1285: 1909 Segmentation fault /opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-fbneo/fbneo_libretro.so --config /opt/retropie/configs/arcade/retroarch.cfg "/home/pi/RetroPie/roms/arcade/1942.zip" --verbose --appendconfig /dev/shm/retroarch.cfg -
so I removed the Arcade folder completely and replaced it with a know good folder and same thing. I think it may be the emulators. Where is the root directory for the emulators. The Arcade folder I added has emulators in it but these are not the ones that show up on the game so I assume the parent files are stored somewhere other then the Arcade folder.
Thank you
Ken -
@ken-tipton Why did you put emulators in the ROM folder? How do you expect anyone to be able to help you when you "customize" the files and file locations?
-
@iandaemon I don't think that's what they meant. The log shows the emulator is in the usual place.
@Ken-Tipton the emulator is
retroarch
, in/opt/retropie/emulators
. Do you have any remaps for the game ? Did you use the RetroArch's RGUI to reset/save the configuration file ? -
@mitu said in No Games will load:
@iandaemon I don't think that's what they meant. The log shows the emulator is in the usual place.
@Ken-Tipton the emulator is
retroarch
, in/opt/retropie/emulators
. Do you have any remaps for the game ? Did you use the RetroArch's RGUI to reset/save the configuration file ?I did not reset or save a config file. All games in the Arcade folder just stopped working I didn't do anything diffrent.
- I copied entire Arcade folder to my desktop PC
- I deleted Arcade folder from retropie via ssh
- I reloaded a known good Arcade file from another sd card. (I played games on this card and they loaded fine.) I copied the Entire Arcade folder from this SD to my Desktop PC then loaded it to Retropie using ssh
- Inside the Arcade folder are game roms and emulators along with art sets.
- I went to retropie setup and updated my most used emulator cores.
-
@mitu They said "The Arcade folder I added has emulators in it", that's all.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.