Raspberry Pi OS Bookworm Released

windg

@mitu It was possible to reproduse the issue and take a log from dsmeg . I confirm, is the issue you had reference.

[ 1719.110492] vc4-drm gpu: [drm] *ERROR* Failed to allocate DLIST entry: -28
[ 1719.122901] vc4-drm gpu: [drm] *ERROR* Failed to allocate DLIST entry: -28
[ 1719.142546] vc4-drm gpu: [drm] *ERROR* Failed to allocate DLIST entry: -28
[ 1719.512824] vc4-drm gpu: [drm] *ERROR* Failed to allocate DLIST entry: -28
[ 1719.558539] vc4-drm gpu: [drm] *ERROR* Failed to allocate DLIST entry: -28
[ 1719.712749] vc4-drm gpu: [drm] *ERROR* Failed to allocate DLIST entry: -28
[ 1719.764220] vc4-drm gpu: [drm] *ERROR* Failed to allocate DLIST entry: -28
[ 1719.815609] vc4-drm gpu: [drm] *ERROR* Failed to allocate DLIST entry: -28
[ 1720.213005] vc4-drm gpu: [drm] *ERROR* Failed to allocate DLIST entry: -28

Full dsmeg log: https://pastebin.com/75t7DSy9

mitu

@windg well, if you feel adventurous, you can try to install the ~~latest~~ rpi-update kernel from the linked issue and see if it fixes it. But, if you have any drivers installed for one of your gamepads, they'll likely break since there's no corresponding headers installed.

windg

~~I will leave it for now, i~~t is obvious that the OS needs time before it can be used for our purpose.

Ok i installed the latest kernel, i reinstall also xpad driver. So far no issues but will need few days to be sure.

windg

I used this setting in the last few days, with the kernel fix, and so far the system hasn't frozen again. If anyone wants to try it be careful, as mitu warns, it breaks the gamepads drivers.

mitu

@windg The fix has been merged into the RPI kernel, it will probably be in the next kernel package upgrade.

windg

@mitu This merge will add and the headers? Thanks!

RapidEdwin08

@windg said in Raspberry Pi OS Bookworm Released:

I used this setting in the last few days, with the kernel fix, and so far the system hasn't frozen again. If anyone wants to try it be careful, as mitu warns, it breaks the gamepads drivers.

Same here on x2 RPi 4's, No Issues since applying Kernel mentioned above.

I did not have to touch anything in regards to my generic xbox360 style joypad/receiver on either Pi.
Both of them worked out of the box before even installing xpad driver (or Kernel Fix) from RetroPie-Setup to begin with.
Ran lsusb -t and both appear to be using Driver=xpad at the moment.

windg

My gamepads (Logitech F310 and 710) are working too, but if i try to reinstall xpad driver it's failing.

mitu

@windg said in Raspberry Pi OS Bookworm Released:

@mitu This merge will add and the headers? Thanks!

Yes.

windg

I have build the cores For Bookworm Lite 64 bit in Pi5, can i transfer them in Pi4 with Bullseye or Bookworm Lite 64 bit? Do we know if the next stable image for Pi4 will use Bullseye or Bookworm? Thanks!

Edit: I transfer scummvm and it's working.

RapidEdwin08

@mitu said in Raspberry Pi OS Bookworm Released:

@windg well, if you feel adventurous, you can try to install the ~~latest~~ rpi-update kernel from the linked issue and see if it fixes it. But, if you have any drivers installed for one of your gamepads, they'll likely break since there's no corresponding headers installed.

Can you please provide or point me in the right direction to obtain the Kernel Hash# to Revert to Stock Kernel for Bookworm?

sudo rpi-update raspiOS-stock-hash-#

sudo rpi-update pulls/5684 definitely resolved the dlist memory issue on pi4.
But I think we're still waiting on 0fficial Kernel with dlistFix + headers...

mitu

@RapidEdwin08 said in Raspberry Pi OS Bookworm Released:

Can you please provide or point me in the right direction to obtain the Kernel Hash# to Revert to Stock Kernel for Bookworm?

https://www.raspberrypi.com/documentation/computers/os.html#how-to-get-back-to-safety

sseehra

Hello everyone,
I am currently having issues compiling mupenplus64 for retropie on Bookworm 32 bit full version. I have installed the libvulkan-dev package as recommended, and later used PiKISS to install the full vulkan package. Despite this, I am unable to compile the core. I have attached the log file as a google drive link. If anyone could assist me with this, I would greatly appreciate it.

Link: https://drive.google.com/file/d/1R5R8G55qsZVK04XgnqZUZoHM1JDhY8YU/view?usp=sharing

mitu

@sseehra said in Raspberry Pi OS Bookworm Released:

I am currently having issues compiling mupenplus64 for retropie on Bookworm 32 bit full version

On a 32bit system, RaspiOS will boot with the 64bit kernel and, because of it, Mupen64plus build scripts are assuming you're running a 64bit system. The build errors appear because of that.

Instruct the bootloader to not load the 64bit kernel and the build will work.

windg

@sseehra Add to the /boot/config.txt file this : arm_64bit=0 . It's what mitu suggest you.

You can access boot partition from a windows machine due to be fat32 or from SSH .

sseehra

@windg Thank you for the response. I ended up installing the 64 bit of bookworm, since I needed this version of the software for other purposes.

sseehra

Hello again everyone,
I managed to compile RetroPie successfully on 64bit Bookworm, but I am getting the VolumeControl::init() - failed to find mixer elements!

I am not sure how to remedy this for this current OS, and would appreciate any assistance if possible. I am currently configured to use HDMI audio, and would like if I could switch between HDMI and audio jack while using retropie

RapidEdwin08

@sseehra Try Default+Master for sound settings in Emulationstation.
For swapping audio output use the Audio Settings from RetroPie Setup to change HDMI/Headphone.

Sluggo

@sseehra Are you running RetroPie while running 64bit Bookworm desktop?

I'm trying to accomplish it where when my pi5 boots:

My primary monitor is the bookworm 64bit desktop environment.
My secondary monitor is RetroPie (or EmulationStation) to play games.

Any ideas how to make this happen?

Div1nus

Hello everyone. I've been reading forums and Reddit, and many people write that they install RetroPie manually on the new version of Raspberry Pi OS Bookworm without any major issues, even on 64-bit systems.
I decided to update my GP430 console, and now I've been trying to install RetroPie on my Chinese console based on Raspberry Pi 3 CM Lite for the second day.
I followed the standard instructions, installing on a clean image Raspberry Pi OS Lite (Bookworm) 64-bit.

Here's what happens when attempting to install EmulationStation:


= = = = = = = = = = = = = = = = = = = = =
Installing dependencies for 'emulationstation' : EmulationStation - Frontend used by RetroPie for launching emulators
= = = = = = = = = = = = = = = = = = = = =

Did not find needed dependencies: libfreeimage-dev libfreetype-dev libcurl4-openssl-dev cmake libvlc-dev libvlccore-dev vlc rapidjson-dev omxplayer. Trying to install them now.
Reading package lists...
Building dependency tree...
Reading state information...
Package omxplayer is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'omxplayer' has no installation candidate
Could not install package(s): libfreeimage-dev libfreetype-dev libcurl4-openssl-dev cmake libvlc-dev libvlccore-dev vlc rapidjson-dev omxplayer.

So I changed this in the code:


    [[ "$__os_debian_ver" -gt 8 ]] && depends+=(rapidjson-dev)
    isPlatform "x11" && depends+=(gnome-terminal mesa-utils)
    if isPlatform "dispmanx" && ! isPlatform "osmc"; then
        depends+=(omxplayer)
    fi
    getDepends "${depends[@]}"
}

to this:


    [[ "$__os_debian_ver" -gt 8 ]] && depends+=(rapidjson-dev)
    isPlatform "x11" && depends+=(gnome-terminal mesa-utils)
    getDepends "${depends[@]}"
}

But this did not solve the problem, this is how the installation ends:


CMakeFiles/emulationstation.dir/src/views/gamelist/GridGameListView.cpp.o CMakeFiles/emulationstation.dir/src/views/gamelist/VideoGameListView.cpp.o CMakeFiles/emulationstation.dir/src/views/SystemView.cpp.o CMakeFiles/emulationstation.dir/src/views/ViewController.cpp.o CMakeFiles/emulationstation.dir/src/views/UIModeController.cpp.o -o ../emulationstation   -L/opt/vc/lib  -Wl,-rpath,/opt/vc/lib: -lfreetype -lfreeimage -Wl,-Bstatic -lSDL2main -Wl,-Bdynamic -lSDL2 -lcurl -L/usr/lib/aarch64-linux-gnu -lvlc ../libpugixml.a ../libnanosvg.a -lasound /opt/vc/lib/libbrcmGLESv2.so -lbcm_host ../libes-core.a -lfreetype -lfreeimage -Wl,-Bstatic -lSDL2main -Wl,-Bdynamic -lSDL2 -lcurl -L/usr/lib/aarch64-linux-gnu -lvlc ../libpugixml.a ../libnanosvg.a -lasound /opt/vc/lib/libbrcmGLESv2.so -lbcm_host 
/usr/bin/ld: /opt/vc/lib/libbrcmGLESv2.so: error adding symbols: file in wrong format
collect2: error: ld returned 1 exit status
make[2]: *** [es-app/CMakeFiles/emulationstation.dir/build.make:788: emulationstation] Error 1
make[2]: Leaving directory '/home/danil/RetroPie-Setup/tmp/build/emulationstation'
make[1]: *** [CMakeFiles/Makefile2:248: es-app/CMakeFiles/emulationstation.dir/all] Error 2
make[1]: Leaving directory '/home/danil/RetroPie-Setup/tmp/build/emulationstation'
make: *** [Makefile:156: all] Error 2
Removing additional swap
Could not successfully build emulationstation - EmulationStation - Frontend used by RetroPie for launching emulators (/home/danil/RetroPie-Setup/tmp/build/emulationstation/emulationstation not found).
/home/danil/RetroPie-Setup

Log ended at: Thu Feb  8 10:40:41 AM CET 2024
Total running time: 0 hours, 20 mins, 58 secs

Trying to simply install "omxiv" naturally does not work, this is already clear:

/usr/bin/ld: omx_render.o:/home/danil/RetroPie-Setup/tmp/build/omxiv/omx_render.h:71: multiple definition of `OMX_RENDER_TRANSITION'; omxiv.o:/home/danil/RetroPie-Setup/tmp/build/omxiv/omx_render.h:71: first defined here
/usr/bin/ld: skipping incompatible /opt/vc/lib//libopenmaxil.so when searching for -lopenmaxil
/usr/bin/ld: cannot find -lopenmaxil: No such file or directory
/usr/bin/ld: skipping incompatible /opt/vc/lib//libopenmaxil.so when searching for -lopenmaxil
/usr/bin/ld: skipping incompatible /opt/vc/lib//libbcm_host.so when searching for -lbcm_host
/usr/bin/ld: skipping incompatible /opt/vc/lib//libvcos.so when searching for -lvcos
collect2: error: ld returned 1 exit status
make: *** [Makefile:14: omxiv.bin] Error 1
Could not successfully build omxiv - OpenMAX image viewer for the Raspberry Pi (omxiv.bin not found).
/home/danil/RetroPie-Setup

Log ended at: Thu Feb  8 11:02:07 AM CET 2024
Total running time: 0 hours, 0 mins, 35 secs

Here's how the RetroArch installation attempt ended:



/usr/bin/ld: skipping incompatible /opt/vc/lib/libvcos.so when searching for -lvcos
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvcos.so when searching for -lvcos
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvcos.so when searching for -lvcos
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvchiq_arm.so when searching for -lvchiq_arm
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvchiq_arm.so when searching for -lvchiq_arm
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvchiq_arm.so when searching for -lvchiq_arm
/usr/bin/ld: skipping incompatible /opt/vc/lib/libbrcmOpenVG.so when searching for -lbrcmOpenVG
/usr/bin/ld: skipping incompatible /opt/vc/lib/libbrcmOpenVG.so when searching for -lbrcmOpenVG
/usr/bin/ld: skipping incompatible /opt/vc/lib/libbrcmOpenVG.so when searching for -lbrcmOpenVG
/usr/bin/ld: cannot find -lbrcmOpenVG: No such file or directory
/usr/bin/ld: skipping incompatible /opt/vc/lib/libbrcmOpenVG.so when searching for -lbrcmOpenVG
/usr/bin/ld: skipping incompatible /opt/vc/lib/libbrcmOpenVG.so when searching for -lbrcmOpenVG
/usr/bin/ld: skipping incompatible /opt/vc/lib/libbrcmOpenVG.so when searching for -lbrcmOpenVG
/usr/bin/ld: skipping incompatible /opt/vc/lib/libbcm_host.so when searching for -lbcm_host
/usr/bin/ld: skipping incompatible /opt/vc/lib/libbcm_host.so when searching for -lbcm_host
/usr/bin/ld: skipping incompatible /opt/vc/lib/libbcm_host.so when searching for -lbcm_host
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvcos.so when searching for -lvcos
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvcos.so when searching for -lvcos
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvcos.so when searching for -lvcos
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvchiq_arm.so when searching for -lvchiq_arm
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvchiq_arm.so when searching for -lvchiq_arm
/usr/bin/ld: skipping incompatible /opt/vc/lib/libvchiq_arm.so when searching for -lvchiq_arm
collect2: error: ld returned 1 exit status
make: *** [Makefile:204: retroarch] Error 1
Could not successfully build retroarch - RetroArch - frontend to the libretro emulator cores - required by all lr-* emulators (/home/danil/RetroPie-Setup/tmp/build/retroarch/retroarch not found).
/home/danil/RetroPie-Setup

Log ended at: Thu Feb  8 09:07:13 PM CET 2024
Total running time: 0 hours, 56 mins, 6 secs

I have these settings in config.txt:


# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Enable audio (loads snd_bcm2835) (!!!!! The sound is output somehow differently in this Chinese crap !!!!!)
dtparam=audio=off

# Additional overlays and parameters are documented
# /boot/firmware/overlays/README

# Automatically load overlays for detected cameras
#camera_auto_detect=1

# Automatically load overlays for detected DSI displays
#display_auto_detect=1

# Automatically load initramfs files, if found
#auto_initramfs=1

# Enable DRM VC4 V3D driver (!!!!! LCD and display rotation 90 degrees does not work when used "fkms", just "kms" not work at all!!!!!)
#dtoverlay=vc4-fkms-v3d
#max_framebuffers=2

# Don't have the firmware create an initial video= setting in cmdline.txt.
# Use the kernel's default instead.
#disable_fw_kms_setup=1

# Disable compensation for displays with overscan
disable_overscan=1

# Run as fast as firmware / board allows
arm_boost=1

#USB current for console GP430
max_usb_current=1

#DPI for GP430 console display
dtoverlay=dpi24
overscan_left=0
overscan_right=0
overscan_top=0
overscan_bottom=0
framebuffer_width=800
framebuffer_height=480
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
dpi_output_format=0x050227
dpi_timings=480 0 13 3 32 800 0 40 48 88 0 0 0 60 0 32000000 6
extra_transpose_buffer=2

#Rotate 90 degrees for GP430 display
display_rotate=1
#display_lcd_rotate=1
extra_transpose_buffer=2

gpu_mem=256

[cm4]
otg_mode=1

[all]

Here is the console output for the commands "lsb_release -a", "uname -a", "dpkg -L libraspberrypi0", "cat /etc/apt/sources.list":


lsb_release -a

No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 12 (bookworm)
Release:        12
Codename:       bookworm

sudo uname -a

Linux raspberrypi-games 6.1.74-v8+ #1725 SMP PREEMPT Mon Jan 22 13:35:32 GMT 2024 aarch64 GNU/Linux

dpkg -L libraspberrypi0

/.
/lib
/lib/udev
/lib/udev/rules.d
/lib/udev/rules.d/10-local-rpi.rules
/usr
/usr/lib
/usr/lib/aarch64-linux-gnu
/usr/lib/aarch64-linux-gnu/libbcm_host.so.0
/usr/lib/aarch64-linux-gnu/libdebug_sym.so.0
/usr/lib/aarch64-linux-gnu/libdtovl.so.0
/usr/lib/aarch64-linux-gnu/libvchiq_arm.so.0
/usr/lib/aarch64-linux-gnu/libvcos.so.0
/usr/share
/usr/share/doc
/usr/share/doc/libraspberrypi0
/usr/share/doc/libraspberrypi0/README.md
/usr/share/doc/libraspberrypi0/changelog.Debian.gz

cat /etc/apt/sources.list

deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
deb http://deb.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware

I also tried to do Basic Install on x32
This was a big mistake, I waited 5 hours to finally get information about what could not be installed...
And now it seems to me that the problem is me, I’m just stupid and can’t simply install RetroPie, which everyone else can...


= = = = = = = = = = = = = = = = = = = = =
Building 'retroarch' : RetroArch - frontend to the libretro emulator cores - required by all lr-* emulators
= = = = = = = = = = = = = = = = = = = = =


Checking existence of -lmbedtls -lmbedx509 -lmbedcrypto ... no
Notice: HID is disabled, libusb support will also be disabled.
Checking existence of -ldinput8 ... no
Checking existence of -ld3d9 ... no
Checking existence of -ldsound ... no
Checking existence of -ld3dx8 ... no
Checking existence of -ld3dx9 ... no
Checking presence of header file GL/gl.h ... yes
Checking existence of -lGL ... yes
Checking function cgCreateContext in -lCg -lCgGL ... no
Error: EGL is disabled and forced to build with OpenGLES support.
rm -rf obj-unix
rm -f retroarch
rm -f *.d
config.mk is outdated or non-existing. Run ./configure again.
Makefile:10: config.mk: No such file or directory
make: *** [Makefile:196: config.mk] Error 1
Could not successfully build retroarch - RetroArch - frontend to the libretro emulator cores - required by all lr-* emulators (/home/danil/RetroPie-Setup/tmp/build/retroarch/retroarch not found).
/home/danil/RetroPie-Setup
Update is available - updating ...

= = = = = = = = = = = = = = = = = = = = =
Installing dependencies for 'emulationstation' : EmulationStation - Frontend used by RetroPie for launching emulators
= = = = = = = = = = = = = = = = = = = = =

Did not find needed dependencies: libfreeimage-dev libfreetype-dev libcurl4-openssl-dev cmake libvlc-dev libvlccore-dev vlc rapidjson-dev omxplayer. Trying to install them now.
Reading package lists...
Building dependency tree...
Reading state information...
Package omxplayer is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'omxplayer' has no installation candidate
Could not install package(s): libfreeimage-dev libfreetype-dev libcurl4-openssl-dev cmake libvlc-dev libvlccore-dev vlc rapidjson-dev omxplayer.
Update is available - updating ...


..................................


/usr/include/SDL2/SDL_config.h:429: warning: "SDL_VIDEO_OPENGL" redefined
  429 | #define SDL_VIDEO_OPENGL 1
      | 
<command-line>: note: this is the location of the previous definition
    CC  _obj/RenderBase_neon.o
    LD  mupen64plus-video-rice.so
/usr/bin/ld: cannot find -lbrcmEGL: No such file or directory
/usr/bin/ld: cannot find -lbrcmGLESv2: No such file or directory
collect2: error: ld returned 1 exit status
make: *** [Makefile:469: mupen64plus-video-rice.so] Error 1
make: Leaving directory '/home/danil/RetroPie-Setup/tmp/build/mupen64plus/mupen64plus-video-gles2rice/projects/unix'
current revision "3b43a13"
last build revision 

..................................

[100%] Linking CXX shared library plugin/Release/mupen64plus-video-GLideN64.so
[100%] Built target mupen64plus-video-GLideN64
/home/danil/RetroPie-Setup/tmp/build/mupen64plus /home/danil/RetroPie-Setup
Removing additional swap
Could not successfully build mupen64plus - N64 emulator MUPEN64Plus (mupen64plus-core/projects/unix/libmupen64plus.so.2.0.0 not found).


..................................

= = = = = = = = = = = = = = = = = = = = =
Building 'lr-mupen64plus' : N64 emu - Mupen64Plus + GLideN64 for libretro
= = = = = = = = = = = = = = = = = = = = =

Removing additional swap
Adding 125 MB of additional swap
Setting up swapspace version 1, size = 125 MiB (131067904 bytes)
no label, UUID=fc32c9aa-35c2-4cba-ab7e-6ff49a0c9a4b
find -name "*.o" -type f -delete
find -name "*.d" -type f -delete
rm -f mupen64plus_libretro.so
g++   -mcpu=cortex-a53  -mfpu=neon-fp-armv8 -O2 -fvisibility-inlines-hidden -std=c++11 -O2 -DNDEBUG -fsigned-char -ffast-math -fno-strict-aliasing -fomit-frame-pointer -fvisibility=hidden -DGIT_VERSION=\"" 3d195fc"\" -DOS_LINUX -DHAVE_NEON -D__ARM_NEON__ -D__NEON_OPT -ftree-vectorize -mvectorize-with-neon-quad -ftree-vectorizer-verbose=2 -funsafe-math-optimizations -fno-finite-math-only -D__LIBRETRO__ -DUSE_FILE32API -DM64P_PLUGIN_API -DM64P_CORE_PROTOTYPES -D_ENDUSER_RELEASE -DSINC_LOWER_QUALITY -DTXFILTER_LIB -D__VEC4_OPT -DMUPENPLUSAPI -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I./custom -I./custom/mupen64plus-core -I./custom/android/include -I./custom/GLideN64 -I./GLideN64/src -I./GLideN64/src/osal -I./mupen64plus-core/src -I./mupen64plus-core/src/api -I./custom/mupen64plus-core/plugin/audio_libretro -I./libretro-common/include -I./libretro -I./GLideN64/src/inc -I./xxHash -I./libretro-deps/libpng  -fPIC -DVC -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DHAVE_OPENGLES -DHAVE_OPENGLES2 -DGLES2 -DUSE_DEPTH_RENDERBUFFER -DNEW_DYNAREC=3 -DDYNAREC -c GLideN64/src/FBOTextureFormats.cpp -o GLideN64/src/FBOTextureFormats.o
g++   -mcpu=cortex-a53  -mfpu=neon-fp-armv8 -O2 -fvisibility-inlines-hidden -std=c++11 -O2 -DNDEBUG -fsigned-char -ffast-math -fno-strict-aliasing -fomit-frame-pointer -fvisibility=hidden -DGIT_VERSION=\"" 3d195fc"\" -DOS_LINUX -DHAVE_NEON -D__ARM_NEON__ -D__NEON_OPT -ftree-vectorize -mvectorize-with-neon-quad -ftree-vectorizer-verbose=2 -funsafe-math-optimizations -fno-finite-math-only -D__LIBRETRO__ -DUSE_FILE32API -DM64P_PLUGIN_API -DM64P_CORE_PROTOTYPES -D_ENDUSER_RELEASE -DSINC_LOWER_QUALITY -DTXFILTER_LIB -D__VEC4_OPT -DMUPENPLUSAPI -I/opt/vc/include -I/opt/vc/include/interface/vcos -I/opt/vc/include/interface/vcos/pthreads -I./custom -I./custom/mupen64plus-core -I./custom/android/include -I./custom/GLideN64 -I./GLideN64/src -I./GLideN64/src/osal -I./mupen64plus-core/src -I./mupen64plus-core/src/api -I./custom/mupen64plus-core/plugin/audio_libretro -I./libretro-common/include -I./libretro -I./GLideN64/src/inc -I./xxHash -I./libretro-deps/libpng  -fPIC -DVC -march=armv8-a+crc -mtune=cortex-a53 -mfpu=neon-fp-armv8 -mfloat-abi=hard -DHAVE_OPENGLES -DHAVE_OPENGLES2 -DGLES2 -DUSE_DEPTH_RENDERBUFFER -DNEW_DYNAREC=3 -DDYNAREC -c GLideN64/src/FrameBuffer.cpp -o GLideN64/src/FrameBuffer.o
GLideN64/src/FrameBuffer.cpp: In member function ‘void FrameBufferList::saveBuffer(u32, u16, u16, u16, u16, bool)’:
GLideN64/src/FrameBuffer.cpp:630:25: error: ‘glDiscardFramebufferEXT’ was not declared in this scope; did you mean ‘glBindFramebuffer’?
  630 |                         glDiscardFramebufferEXT(GL_FRAMEBUFFER, 1, discards);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~
      |                         glBindFramebuffer
GLideN64/src/FrameBuffer.cpp: In member function ‘void FrameBufferList::attachDepthBuffer()’:
GLideN64/src/FrameBuffer.cpp:762:9: error: ‘glDiscardFramebufferEXT’ was not declared in this scope; did you mean ‘glBindFramebuffer’?
  762 |         glDiscardFramebufferEXT(GL_FRAMEBUFFER, 1, discards);
      |         ^~~~~~~~~~~~~~~~~~~~~~~
      |         glBindFramebuffer
GLideN64/src/FrameBuffer.cpp: In member function ‘void FrameBufferList::renderBuffer(u32)’:
GLideN64/src/FrameBuffer.cpp:996:17: error: ‘glDiscardFramebufferEXT’ was not declared in this scope; did you mean ‘glBindFramebuffer’?
  996 |                 glDiscardFramebufferEXT(GL_FRAMEBUFFER, 1, discards);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~
      |                 glBindFramebuffer
make: *** [Makefile:434: GLideN64/src/FrameBuffer.o] Error 1
Removing additional swap
Could not successfully build lr-mupen64plus - N64 emu - Mupen64Plus + GLideN64 for libretro (/home/danil/RetroPie-Setup/tmp/build/lr-mupen64plus/mupen64plus_libretro.so not found).


= = = = = = = = = = = = = = = = = = = = =
Building 'lr-vecx' : Vectrex emulator - vecx port for libretro
= = = = = = = = = = = = = = = = = = = = =

rm -f vecx_libretro.so ./e6809.o ./e8910.o ./libretro.o ./vecx.o ./libretro-common/glsym/rglgen.o ./libretro-common/glsym/glsym_gl.o
cc  -mcpu=cortex-a53  -mfpu=neon-fp-armv8 -O2 -DGIT_VERSION=\"" a401c26"\" -I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/vmcs_host/linux -O2 -DNDEBUG -DHAVE_OPENGLES -DHAVE_OPENGLES2 -D__LIBRETRO__ -DHAVE_STRINGS_H -DHAVE_STDINT_H -DHAVE_INTTYPES_H  -DINLINE=inline -DHAS_GPU -DHAVE_OPENGLES2  -Wall -W -Wno-unused-parameter -Wno-sign-compare -Wno-uninitialized -fPIC -DFRONTEND_SUPPORTS_RGB565  -I. -I./libretro-common/include -I./libretro-common/include -c -oe6809.o e6809.c
cc  -mcpu=cortex-a53  -mfpu=neon-fp-armv8 -O2 -DGIT_VERSION=\"" a401c26"\" -I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/vmcs_host/linux -O2 -DNDEBUG -DHAVE_OPENGLES -DHAVE_OPENGLES2 -D__LIBRETRO__ -DHAVE_STRINGS_H -DHAVE_STDINT_H -DHAVE_INTTYPES_H  -DINLINE=inline -DHAS_GPU -DHAVE_OPENGLES2  -Wall -W -Wno-unused-parameter -Wno-sign-compare -Wno-uninitialized -fPIC -DFRONTEND_SUPPORTS_RGB565  -I. -I./libretro-common/include -I./libretro-common/include -c -oe8910.o e8910.c
e8910.c: In function ‘e8910_callback’:
e8910.c:511:50: warning: comparison is always false due to limited range of data type [-Wtype-limits]
  511 |                                 if (PSG.CountEnv < 0)
      |                                                  ^
cc  -mcpu=cortex-a53  -mfpu=neon-fp-armv8 -O2 -DGIT_VERSION=\"" a401c26"\" -I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/vmcs_host/linux -O2 -DNDEBUG -DHAVE_OPENGLES -DHAVE_OPENGLES2 -D__LIBRETRO__ -DHAVE_STRINGS_H -DHAVE_STDINT_H -DHAVE_INTTYPES_H  -DINLINE=inline -DHAS_GPU -DHAVE_OPENGLES2  -Wall -W -Wno-unused-parameter -Wno-sign-compare -Wno-uninitialized -fPIC -DFRONTEND_SUPPORTS_RGB565  -I. -I./libretro-common/include -I./libretro-common/include -c -olibretro.o libretro.c
cc  -mcpu=cortex-a53  -mfpu=neon-fp-armv8 -O2 -DGIT_VERSION=\"" a401c26"\" -I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/vmcs_host/linux -O2 -DNDEBUG -DHAVE_OPENGLES -DHAVE_OPENGLES2 -D__LIBRETRO__ -DHAVE_STRINGS_H -DHAVE_STDINT_H -DHAVE_INTTYPES_H  -DINLINE=inline -DHAS_GPU -DHAVE_OPENGLES2  -Wall -W -Wno-unused-parameter -Wno-sign-compare -Wno-uninitialized -fPIC -DFRONTEND_SUPPORTS_RGB565  -I. -I./libretro-common/include -I./libretro-common/include -c -ovecx.o vecx.c
cc  -mcpu=cortex-a53  -mfpu=neon-fp-armv8 -O2 -DGIT_VERSION=\"" a401c26"\" -I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/vmcs_host/linux -O2 -DNDEBUG -DHAVE_OPENGLES -DHAVE_OPENGLES2 -D__LIBRETRO__ -DHAVE_STRINGS_H -DHAVE_STDINT_H -DHAVE_INTTYPES_H  -DINLINE=inline -DHAS_GPU -DHAVE_OPENGLES2  -Wall -W -Wno-unused-parameter -Wno-sign-compare -Wno-uninitialized -fPIC -DFRONTEND_SUPPORTS_RGB565  -I. -I./libretro-common/include -I./libretro-common/include -c -olibretro-common/glsym/rglgen.o libretro-common/glsym/rglgen.c
cc  -mcpu=cortex-a53  -mfpu=neon-fp-armv8 -O2 -DGIT_VERSION=\"" a401c26"\" -I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/vmcs_host/linux -O2 -DNDEBUG -DHAVE_OPENGLES -DHAVE_OPENGLES2 -D__LIBRETRO__ -DHAVE_STRINGS_H -DHAVE_STDINT_H -DHAVE_INTTYPES_H  -DINLINE=inline -DHAS_GPU -DHAVE_OPENGLES2  -Wall -W -Wno-unused-parameter -Wno-sign-compare -Wno-uninitialized -fPIC -DFRONTEND_SUPPORTS_RGB565  -I. -I./libretro-common/include -I./libretro-common/include -c -olibretro-common/glsym/glsym_es2.o libretro-common/glsym/glsym_es2.c
cc -ovecx_libretro.so -fPIC -shared -Wl,--version-script=link.T -Wl,--no-undefined ./e6809.o ./e8910.o ./libretro.o ./vecx.o ./libretro-common/glsym/rglgen.o ./libretro-common/glsym/glsym_es2.o -lm  -L/opt/vc/lib -lbrcmGLESv2 -lbcm_host -lpthread
/usr/bin/ld: cannot find -lbrcmGLESv2: No such file or directory
collect2: error: ld returned 1 exit status
make: *** [Makefile.libretro:800: vecx_libretro.so] Error 1
Could not successfully build lr-vecx - Vectrex emulator - vecx port for libretro (/home/danil/RetroPie-Setup/tmp/build/lr-vecx/vecx_libretro.so not found).

= = = = = = = = = = = = = = = = = = = = =
Building 'retroarch' : RetroArch - frontend to the libretro emulator cores - required by all lr-* emulators
= = = = = = = = = = = = = = = = = = = = =

Checking operating system ... Linux 
Checking for suitable working C compiler ... /usr/bin/gcc works
Checking for suitable working C++ compiler ... /usr/bin/g++ works
Checking for pkg-config ... /usr/bin/pkgconf
Checking for availability of switch -std=gnu99 in /usr/bin/gcc ... yes
Checking for availability of switch -std=c++11 in /usr/bin/g++ ... yes
Checking for availability of switch -Wno-unused-result in /usr/bin/gcc ... yes
Checking for availability of switch -Wno-unused-variable in /usr/bin/gcc ... yes
Checking function sd_get_machine_names in -lsystemd ... no
Checking presence of package bcm_host ... 1
Checking presence of header file EGL/eglext.h ... yes
Checking presence of package brcmegl ... no
Checking existence of -lbrcmEGL ... no
Checking function ass_library_init in -lfribidi -lass ... no
Checking function pthread_create in -lpthread ... yes
Checking function pthread_key_create in -lpthread ... yes
Checking presence of package check >= 0.15 ... no
Checking presence of header file scsi/sg.h ... yes
Checking function dlopen in -ldl ... yes
Checking function socket in -lc ... yes
Checking function getaddrinfo in -lc ... yes
Checking function fcntl in -lc ... yes
Checking function getopt_long in -lc ... yes
Checking presence of package alsa ... 1.2.8
Checking presence of package libsixel >= 1.6.0 ... no
Checking presence of predefined macro AUDIO_SETINFO in sys/audioio.h ... no
Checking presence of package rsound >= 1.1 ... no
Checking presence of package libroar >= 1.0.12 ... no
Checking presence of package sdl2 >= 2.0.0 ... 2.26.3
Checking presence of package flac ... no
Checking existence of -lmbedtls -lmbedx509 -lmbedcrypto ... no
Notice: HID is disabled, libusb support will also be disabled.
Checking existence of -ldinput8 ... no
Checking existence of -ld3d9 ... no
Checking existence of -ldsound ... no
Checking existence of -ld3dx8 ... no
Checking existence of -ld3dx9 ... no
Checking presence of header file GL/gl.h ... yes
Checking existence of -lGL ... yes
Checking function cgCreateContext in -lCg -lCgGL ... no
Error: EGL is disabled and forced to build with OpenGLES support.
rm -rf obj-unix
rm -f retroarch
rm -f *.d
config.mk is outdated or non-existing. Run ./configure again.
Makefile:10: config.mk: No such file or directory
make: *** [Makefile:196: config.mk] Error 1
Could not successfully build retroarch - RetroArch - frontend to the libretro emulator cores - required by all lr-* emulators (/home/danil/RetroPie-Setup/tmp/build/retroarch/retroarch not found).
/home/danil/RetroPie-Setup
Update is available - updating ...


= = = = = = = = = = = = = = = = = = = = =
Installing dependencies for 'emulationstation' : EmulationStation - Frontend used by RetroPie for launching emulators
= = = = = = = = = = = = = = = = = = = = =

Did not find needed dependencies: libfreeimage-dev libfreetype-dev libcurl4-openssl-dev cmake libvlc-dev libvlccore-dev vlc rapidjson-dev omxplayer. Trying to install them now.
Reading package lists...
Building dependency tree...
Reading state information...
Package omxplayer is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'omxplayer' has no installation candidate
Could not install package(s): libfreeimage-dev libfreetype-dev libcurl4-openssl-dev cmake libvlc-dev libvlccore-dev vlc rapidjson-dev omxplayer.
Update is available - updating ...

= = = = = = = = = = = = = = = = = = = = =
Installing dependencies for 'splashscreen' : Configure Splashscreen
= = = = = = = = = = = = = = = = = = = = =

Did not find needed dependencies: insserv omxplayer. Trying to install them now.
Reading package lists...
Building dependency tree...
Reading state information...
Package omxplayer is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'omxplayer' has no installation candidate
Could not install package(s): insserv omxplayer.

Log ended at: Thu Feb  8 07:55:42 PM CET 2024
Total running time: 4 hours, 52 mins, 54 secs

I'm too tired, but next week I still want to try installing with "dtoverlay=vc4-fkms-v3d", I'll figure out how to rotate the screen using fbcon=rotate:1, I hope this will also rotate emulstation and RetroArch...
Although if you install Retropie from a ready-made image, which is based on an old version of the system, everything works without DRM VC4 V3D driver...

If anyone knows how to solve the problem, it would be very great.