[GUIDE] Retropie + 3.5 inch RPi LCD v3.0 (no brand)

[Arzach]

Still works great with 4.5, thanks for the guide! Probably too late for @shredderbenjamin , but the filename isn't correct in that command. it's "waveshare35a.dtbo" not "waveshare35a-overlay.dtb". Once I figured that out it worked like a charm!

[sword_sea]

Hello fellow humans. Ive gotten mine to work, though the colors are a bit wonky. can someone tell me the code for rotating the screen 180 degrees? I would like to use it on it's side for convenience reasons.

[Bio_C]

@sword_sea You should change the string in the /boot/config.txt file
from: dtoverlay=waveshare35a
to: dtoverlay=waveshare35a:rotate=180
Didn't try it myself, but that's what is says in the waveshare readme file.

[dkajan]

Hello I have only black screen...please help me

[SeaFlurry02]

That sudo cp waveshare-dtoverlays/waveshare35a-overlay.dtb /boot/overlays/waveshare35a.dtbo command wont work for me! All i get is the command prompt yelling "cp: missing destination file operand after {former command here}"! Anyone know how to resolve?

[samco]

@SeaFlurry02 just happen to be working on this too. There is a "o" missing in the copy try sudo cp waveshare-dtoverlays/waveshare35a-overlay.dtbo /boot/overlays/waveshare35a.dtbo

[hohodsj]

Thank you a million!!!
The only thing I modified was

sudo cp waveshare-dtoverlays/waveshare35a-overlay.dtb /boot/overlays/waveshare35a.dtbo

to

sudo cp waveshare-dtoverlays/waveshare35a.dtbo /boot/overlays/waveshare35a.dtbo

[slowplayer157]

Hey thank for the code and it works great for a kit i pick up on Ebay, it wasn't that difficult to follow along with, and it's great that i had come across this. This is such great help, and understood what you mean by " this is very important because most guide are for 3.2 inch so if u have the waveshare 3.2 u must exchange the word "waveshare35a " in "waveshare32b" so when you mean if you have a 3.2 inch change "waveshare35a " to "waveshare35b" and if you have a 3.5 inch keep it at waveshare35a

[jtkblue]

is there a way I can switch between HDMI and LCD screen?

[dariofavaron]

Thanks it worked.
The emulator was not centered in the picture so i had to change the resolution under RETROARCH -> Settings -> Video and width and height. it was 12807someting and i put the resolution of the screen 480320