Please do not post a support request without first reading and following the advice in https://retropie.org.uk/forum/topic/3/read-this-first

Nice Rpi case for 3D printers.



  • Hi all, i've found this case and i think somebody would have interest on it.

    Works with the following Raspberry Pi Models:

    Raspberry Pi 3
    Raspberry Pi 2
    Raspberry Pi Model B+

    alt text

    All tops are Universal. They will work on the Pi3, Pi2, or B+.
    RPi 1 (Model B+) and RPi 2 are the same, so the files currently uploaded for RPi 2 are correct.
    RPi 3 top is the same as RPi 2. Only difference in the RPi 3 bottom is a small cutout for the SD card.

    Source:http://www.thingiverse.com/thing:922740

    RPi 1 (Model B) can be found here... http://www.thingiverse.com/thing:608169

    Extracted from comments:

    Which 3D printer you used to print this design?
    SeeMeCNC Rostock Max (upgraded V1) was used to print all the pictures shown.

    Which software you used to draw this design?
    Autodesk Fusion 360 for the original design.

    Any other 3D printers that you can recommend?
    I also have a Flashforge Creator Pro that has worked very well for me.

    Any other software to draw the design that you can recommend?
    I would recommend OnShape and Fusion 360. Behind those would be Designspark Mechanical and PTC Creo Elements.

    I hope this can be useful to somebody.

    Regards.



Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.

Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.