Retro game stuff talk
-
@FlyingTomahawk said in Retro game stuff talk:
I posted a link, twice I think, to the transparent labels printable layout. I will get my transparent sheets in the next few days then I can print hundrets of em.
The front label (red Famicom) that you posted is very close to the original but not 100%. The Famicom logo on the left is missing and the Famicom text spacing is not the same. But I guess better to have a almost looking same than a messed up one. Do they sell the front label only?The rear one shouldn't be too hard to copy.
I will scan the one I have removed and just reprint it.Now you mention it...my Famicom case doesn't have the FF on it either.
Not found anywhere that does just the front piece.
Almost finished messing around with it...(The inside is quite busy) and it is a little yellower than the pic shows.
Just waiting on the Mausberry circuit, for my power switch, been a month nearly.
The case I gutted for the controllers got turned into a 'Retro Look' USB hub :D
-
From what I've seen, there are multiple revisions of the Famicom, and that front panel art can vary. I think the one with the "FF" looks cooler, but I'm nut sure which label is newer/older.
-
@obsidianspider I find the one with FF on a little off balance, doesnt look the same size as the Family Computer either...
If it was sat breaking the line like the Nintendo...
I just need me one of them red port plugs, sure I've seen them on a site.
-
Got the transparent label print paper today. (Sorry for the bad pic quality.)
Just need to cut them out. One page should cover a couple Famicoms. :)
-
@FlyingTomahawk said in Retro game stuff talk:
transparent label print paper
Nice, I managed to peel mine off easily last night as I sprayed the Famicom, they are currently sat on some baking paper between books, may use some spray adhesive, or look at buying some paper later on.
-
@FlyingTomahawk looks like you're starting a restoration business. How did you print them? Laser printer? How do they look on a Famicom? I wonder how well they'll hold up over time.
-
Famicom restorations at your service. How can I help you today? Hehehe...
Those decals were inkjet printed on a special for inkjet made transparent label paper.
They should hold pretty good for a while.Here you can see a finished result from a guy that has done it already.
-
@FlyingTomahawk Wow, that looks fantastic!
-
Looks good, my peeled off ones are yellowed underneath them, so looks like another Amazon purchase, seen the sheets, be a lot of spares, or, I shall be thinking of of some stickers to print up...
So close to finishing this, waiting on my Mausberry that I ordered on the 6th March.
I blame it all on @FlyingTomahawk
-
lol
Funny we are waiting for the same item which was ordered at the same time.
Send me your address and I'll cut you one row of my printed stickers and send it over to you. You can find my e-mail address in my profile.
-
@FlyingTomahawk said in Retro game stuff talk:
lol
Funny we are waiting for the same item which was ordered at the same time.
Send me your address and I'll cut you one row of my printed stickers and send it over to you. You can find my e-mail address in my profile.
You sir are a gentleman.
I have emailed Mausberry about my order, but are yet to hear anything back.
-
Forget about getting an answer from him/them. I send 3 e-mails, all unanswered.
I read that it might take up to 1 month for the Mausberry to arrive. I don't care about the lost money if it doesn't arrive at all, (Well I do care a tiny bit.), it's more annoying that I cannot continue my Famicom build because of that. And I am a bit busy with work at the moment so not a big deal yet but if I don't get anything by first week April I will have to figure out a different way to power up the Famicom even if it means that I won't be able to use the original button. -
Yeah, the switch is my final piece (well, Roms are a never ending job, but I'm making a very very short lead to plug inside so I can sit the USB stick just inside the cartridge slot), with that bit of board, and working out how to get the reset button on the pins as an 'Escape' key which I just thought about, I can finally get it all in the case, and put the screws back in.
-
@MadRikXIV
Did you take pics of your painted Famicom already? -
@FlyingTomahawk I haven't taken them yet, shall try and find time tonight, got a fair few build pics and updates as it's nearly complete.
Slacking as I can't just email the lot from my phone to myself as they are large, and not got round to bluetooth, drop box, or cropping them to myself.
Will say, the Matt White Plastikote did a good job with 3 light coats.
-
Here's a couple of pics of my spray painted Fami, i shall clean the slight bleed on the front label with a blade, will look great with Tomahawks stickers on it.
-
That looks very good!
-
@MadRikXIV VERY well done. Any tips for painting the plastic? I always worry about adhesion, or that it will be tacky/retain finger prints when you touch it. Spray paint tends to be "soft".
-
@obsidianspider said in Retro game stuff talk:
@MadRikXIV VERY well done. Any tips for painting the plastic? I always worry about adhesion, or that it will be tacky/retain finger prints when you touch it. Spray paint tends to be "soft".
I use PlastiKote, discovered it when I was painting a toy chainsaw for an Evil Costume, suitable for wood, metal, plastic, stone, wicker and crafts.
I find once dry its very durable, my toy chainsaw has survived a few nights out as 'Ash'.
I use the standard paint they sell, it's suitable for plastics, the the usual guidelines, several light coats, usually 3 is enough, sprayed from around 20cm, then leave it, dont be tempted to touch an area till dry.
I find it's a lot finer than other paints when sprayed.
Unlike car paint, there isn't that kinda shiny smooth dig a nail into it and peel it shell when it dries.
I dare say it's available as other brands as well.
-
@MadRikXIV I'll give it a try. I've seen that brand here in the US, and I've been looking for a good paint to use on my GBA project that won't cost me what car paint would.
Contributions to the project are always appreciated, so if you would like to support us with a donation you can do so here.
Hosting provided by Mythic-Beasts. See the Hosting Information page for more information.