Attract Mode with RetroPie - Alternative to EmulationStation

Floob

@zerojay said in Attract Mode with RetroPie - Alternative to EmulationStation:

It would be cool to incorporate some of these changes directly into the installation script I have in my repo. I was planning on doing it manually but if we can save time, all the better.

The main ones are in the ~/.attract directory, so that could be copied across wholesale. Its usually not generated until AM first run. Besides the points I've put above to senkun its just edits to the system specific retroarch.cfg files - but you wouldnt want to overwrite users existing ones.
Plus I've added and edited Shaks script from above.
I've also used davejs latest version of the shader he wrote, and I'm tempted to add curvature by default, so thats now hooked up to the retroarch emulators by default. The Retroarch emulators I've configured in AM have also had the artwork directories created in ~/RetroPie/roms/{systemname}.
There have also been various AM themes pre-installed and the robospin beta added by default.
Hmm, now I write it down there is a fair bit. I'll try a write a more formal change doc to make it easier to monitor.

Cheers,

Floob.

Floob

@Finhead said in Attract Mode with RetroPie - Alternative to EmulationStation:

Nice! This should make it super slick for new installs. Is Daphne one of the emulators pre-configured ?

Sorry, no, but it should be quick to add in as a new emulator in AM, I'll get that in the next image.

Finhead

@Floob said in Attract Mode with RetroPie - Alternative to EmulationStation:

@Finhead said in Attract Mode with RetroPie - Alternative to EmulationStation:

Nice! This should make it super slick for new installs. Is Daphne one of the emulators pre-configured ?

Sorry, no, but it should be quick to add in as a new emulator in AM, I'll get that in the next image.

That would be great since as of now the only way I found to setup multiple games for Daphne in AM is to make a new emulator for each game. I have not found a way to set it up like ES using the same roms directory and multiple folders. If anyone will be able to get that working it'll be you. :)

Floob

@Finhead
Can you put on pastebin one of your Daphne emulator configs for AM?
Should be in here: /home/pi/.attract/emulators

Finhead

@Floob said in Attract Mode with RetroPie - Alternative to EmulationStation:

@Finhead
Can you put on pastebin one of your Daphne emulator configs for AM?
Should be in here: /home/pi/.attract/emulators

Sorry not sure what pastebin is, just uploaded Dragon's Lair and Space Ace into DB. I linked to the public folder so should be downloadable without a DB accoutn etc.

Edit: I'll get them into your pastebin site when I'm home next.

herb_fargus

http://lmgtfy.com/?q=Pastebin+

senkun

@Floob said in Attract Mode with RetroPie - Alternative to EmulationStation:

@senkun Sorry about the delay, I've tried to fish out most of my notes.

I 'fixed' the keyboard hang with a sleep delay in here: /etc/profile.d/10-emulationstation.sh
Although I think the waitusb value in cmdline.txt may be helpful here, I've not tried it out.

The motd can be removed by blanking out /etc/motd, the logo can be removed with logo.nologo in the cmdline.txt
Also change console=tty1 to console=tty2 in there.

I'm afraid my 'fix' for the X white screen showing is the same as yours with the bg values. I'm still trying to do that in a better way.

@Floob no worries mate. Was just curious about the fixes and didn't want to mess around too much, I have your v1 set up really nicely now and didn't want to break it with my kludgy attempts.

Interestingly, I had done more or less done the same things although putting the delay in /10-emulationstation.sh would be cleaner. I'd probably forget I twiddled with rcS.d/S03keyboard-setup. As for the MOTD, I cleared it out by editing /pi/.bashrc instead.

AM is really, really neat. The rom filters are so flexible, plus the layouts can be completely tweaked. The more I fiddle, the more I'm liking it. So glad you made the images, thanks man.

One more thing, in your new video I noticed you put in the AM intro vid and it was playing smoothly. In my setup, the intro runs for 2 seconds and staggers to a halt. The .mp4 is in /.attract/intro and called from within AM. Was your intro set from within AM? Did you install ffmpeg in v2? Or did you set the AM intro as an ES video splashscreen instead?

Finhead

@herb_fargus said in Attract Mode with RetroPie - Alternative to EmulationStation:

http://lmgtfy.com/?q=Pastebin+

I'll look into that when I'm home, DB is no good for files any more? I'll remove the links if that's a issue.

herb_fargus

@Finhead any external link for logs is fine- you just mentioned you didn't know what pastebin was so I thought I'd give you a hint ;)

Karoi

Hi all,

This is new for me, looks awesome and really want to try and install this. But can I still play NES, SNES and all the other systems as well? Or is this just pure for MAME?
Sorry for being a noob. And I figure that the Logitech Gamepad F310 works with this as well?

Thanks!

Finhead

@Floob
Here are those files again, just copy and pasted here. Easier that way. ;)

Generated by Attract-Mode v2.0.0

executable /opt/retropie/emulators/daphne/daphne.bin
args dle21 vldp -nohwaccel -framefile /home/pi/RetroPie/roms/daphne/dle21.daphne/dle21.txt -blank_searches -min_seek_delay 1000 -seek_frames_per_ms 20 -homedir /opt/retropie/emulators/daphne -bank 0 11111000 -bank 1 00110111 -noserversend -volume_vldp 64 -sound_buffer 960 -fullscreen -x 1024 -y 768
rompath /home/pi/RetroPie/roms/daphne/roms/DL
romext .zip
artwork flyer /home/pi/RetroPie/roms/daphne/flyer
artwork marquee /home/pi/RetroPie/roms/daphne/marquee
artwork snap /home/pi/RetroPie/roms/daphne
artwork wheel /home/pi/RetroPie/roms/daphne/wheel

Finhead

@Karoi said in Attract Mode with RetroPie - Alternative to EmulationStation:

Hi all,

This is new for me, looks awesome and really want to try and install this. But can I still play NES, SNES and all the other systems as well? Or is this just pure for MAME?
Sorry for being a noob. And I figure that the Logitech Gamepad F310 works with this as well?

Thanks!

Yes you can use whatever emulator you configure in Attract Mode, as long as it's installed and working in RetroPie.
This is just a different frontend rather than ES.

Karoi

@Finhead said in Attract Mode with RetroPie - Alternative to EmulationStation:

@Karoi said in Attract Mode with RetroPie - Alternative to EmulationStation:

Hi all,

This is new for me, looks awesome and really want to try and install this. But can I still play NES, SNES and all the other systems as well? Or is this just pure for MAME?
Sorry for being a noob. And I figure that the Logitech Gamepad F310 works with this as well?

Thanks!

Yes you can use whatever emulator you configure in Attract Mode, as long as it's installed and working in RetroPie.
This is just a different frontend rather than ES.

Awesome! Thanks for the quick response.

Floob

@senkun said in Attract Mode with RetroPie - Alternative to EmulationStation:

@Floob no worries mate. Was just curious about the fixes and didn't want to mess around too much, I have your v1 set up really nicely now and didn't want to break it with my kludgy attempts.

Interestingly, I had done more or less done the same things although putting the delay in /10-emulationstation.sh would be cleaner. I'd probably forget I twiddled with rcS.d/S03keyboard-setup. As for the MOTD, I cleared it out by editing /pi/.bashrc instead.

AM is really, really neat. The rom filters are so flexible, plus the layouts can be completely tweaked. The more I fiddle, the more I'm liking it. So glad you made the images, thanks man.

One more thing, in your new video I noticed you put in the AM intro vid and it was playing smoothly. In my setup, the intro runs for 2 seconds and staggers to a halt. The .mp4 is in /.attract/intro and called from within AM. Was your intro set from within AM? Did you install ffmpeg in v2? Or did you set the AM intro as an ES video splashscreen instead?

Great, glad you've sorted most of that. I've included the mame ini files needed for filters in my build as well, so hopefully people will get stuck into the filters soon. I'll try and do a video about how to use them soon.

The video issue is just that I'm using a lower quality video. Try using the one that comes with the windows AM download.

Floob

@Finhead said in Attract Mode with RetroPie - Alternative to EmulationStation:

Sorry not sure what pastebin is, just uploaded Dragon's Lair and Space Ace into DB. I linked to the public folder so should be downloadable without a DB accoutn etc.

Edit: I'll get them into your pastebin site when I'm home next.

What happens if you add this as the executable with "[romfilename]" as the argument?
/opt/retropie/emulators/daphne/daphne.sh

Or maybe bash as the executable and the rest as the argument. I dont have a daphne image/rom, so I'm guessing here really.
But I mean like this:
http://pastebin.com/raw/13PCiKK9

Then you would create a bash .sh script for each game you have in /home/pi/RetroPie/roms/daphne
I think an example would look like:
http://pastebin.com/raw/4mstSEDi

You would probably need to chmod that to be executable.
I'll be more help once I've got round to setting daphne up.

Finhead

@Floob said in Attract Mode with RetroPie - Alternative to EmulationStation:

@Finhead said in Attract Mode with RetroPie - Alternative to EmulationStation:

Sorry not sure what pastebin is, just uploaded Dragon's Lair and Space Ace into DB. I linked to the public folder so should be downloadable without a DB accoutn etc.

Edit: I'll get them into your pastebin site when I'm home next.

What happens if you add this as the executable with "[romfilename]" as the argument?
/opt/retropie/emulators/daphne/daphne.sh

Or maybe bash as the executable and the rest as the argument. I dont have a daphne image/rom, so I'm guessing here really.
But I mean like this:
http://pastebin.com/raw/13PCiKK9

Then you would create a bash .sh script for each game you have in /home/pi/RetroPie/roms/daphne
I think an example would look like:
http://pastebin.com/raw/4mstSEDi

You would probably need to chmod that to be executable.
I'll be more help once I've got round to setting daphne up.

Floob when I get home tonight I'll look at that. But I can tell you now after you started talking about scripting I'm pretty much lost.
Can you send me a pm on this?

Finhead

@Floob said in Attract Mode with RetroPie - Alternative to EmulationStation:

@Finhead said in Attract Mode with RetroPie - Alternative to EmulationStation:

Sorry not sure what pastebin is, just uploaded Dragon's Lair and Space Ace into DB. I linked to the public folder so should be downloadable without a DB accoutn etc.

Edit: I'll get them into your pastebin site when I'm home next.

What happens if you add this as the executable with "[romfilename]" as the argument?
/opt/retropie/emulators/daphne/daphne.sh

Or maybe bash as the executable and the rest as the argument. I dont have a daphne image/rom, so I'm guessing here really.
But I mean like this:
http://pastebin.com/raw/13PCiKK9

Then you would create a bash .sh script for each game you have in /home/pi/RetroPie/roms/daphne
I think an example would look like:
http://pastebin.com/raw/4mstSEDi

You would probably need to chmod that to be executable.
I'll be more help once I've got round to setting daphne up.

Got a chance to see if this worked today.
Your second option seems to work almost perfectly. :) Thank you ver much for taking the time to look at this.
The only issue I am having now is the sword/gun buttons don't seem to register anymore even after configuring the the dapinput.ini file. I lost all controls and remapped the D-pad and buttons but only the D-pad now works.
Not sure why this would effect it, will look into it further tonight if I have a chance.

Brigane

It's my understanding that if I want the roms to show video snaps, wheel images etc. in Robospin. The filename has to be the same as both the images and the roms. Does there by any chance exist a program that can rename the files so they match each other. I ask because I'm not interested in changing over 1000 roms manually. Thanks :)

senkun

@Brigane well unless you've renamed your roms all the video snaps/flyers/etc. from all the usual places are named the same as the roms.

Brigane

@senkun I thought I had to get those files from places like emumovies.com and then rename them. I tried the scraper in AM but there are many files that can not be found.