Would you like to play Nokia (J2ME) games on Retropie?

Hex

This actually eliminates the need for JNI and is very fast. Just make changes to the c++ code i mentioned above and remove all print statements so stdout is clean for events while video testing. I shall make way for event passing till then.

Things to Note:

Frame should always be completely passed else Sync will be lost.
C is handling scaling and letterboxing

Also do you have a communication standard in mind for Events or am I free to select?

Edit based on your edit: Well J can start C once resolution is know. Is there a way for J to know resolution once a jar is loaded?

recompile

@hex said in Would you like to play Nokia (J2ME) games on Retropie?:

do you have a communication standard in mind for Events or am I free to select?

Feel free to use whatever you'd like. It could be as simple as a byte for the event type and a byte for event data for keyboard/joystick, maybe a pair of shorts for mouse events. I like simple.

recompile

@hex said in Would you like to play Nokia (J2ME) games on Retropie?:

Is there a way for J to know resolution once a jar is loaded?

Sadly, no. Most games get the display size from the phone, and either adapt to it or fail. A few games have a preferred display size in the manifest, but it's not reliable. This is why I was passing the display resolution in as a parameter.

I had planned to add a configuration editor that would start and ask for things like display size, control configuration, etc. that starts if a configuration for a game can't be found on load, or that can be manually started to modify a games configuration.

This is what I'm thinking. I could pass a byte along with the frame that signals that what follows is either a frame or a change in resolution. Something like [0, ...frame data...] or [1, shortW, shortH]

Hex

@recompile is is ok for me to check for incomming events between frames? I dont know if incoming frames can be guaranteed. So will something like this work for you in "C"? Else I will need to make it multi threaded so that polling and drawing can be done independently.

//wait for incomming frame, blocking call
while true {
    read_frame()
    //Render frame
    show_frame()

    // Check if input event occurred
    if SDL_PollEvent()
        send_event()
}

Hex

@recompile Regarding the resolution problem, I would like to suggest this :

If config found

Read config
Read resolution from config
Start C based on resolution

If config not found

Get screen resolution
Start C based on resolution
Send frames for config.
Get map of all required info
Write config file
End C by closing C.stdin pipe
GOTO : if config found

Will this work ?

I would like to keep communications to a minimum. Killing and restarting is not much of a big deal.

recompile

@hex That'll work. If freely killing and restarting 'C' isn't going to be a problem then the problem is solved.

@hex said in Would you like to play Nokia (J2ME) games on Retropie?:

@recompile is is ok for me to check for incomming events between frames? I dont know if incoming frames can be guaranteed.

There's no guarantee at all. Some games will just sit and not repaint while waiting for an event. Other games will draw frames as fast as they can, even if nothing changes.

Hex

@recompile Ok so we will need a multi threaded solution. Currently C can wait forever for new frames to come whilst showing last received frame. I shall get back to you as soon as I have it working.

I also had a question about how audio will be handled. Will Java take care of it?

SDL Controls are working nicely. I can send J ascii codes for the buttons clicked followed by a delimiter if necessary. Some special key codes are >256 (eg Shift, Tab Ctrl, Alt)

Do you need joystick and mouse ? Considering no mobile phone had that.

pjft

I just want to say that even though this thread has no other active participants, it's highly enjoyable, educational and even exiting to watch this unfold.

Thank you for pursuing this and for doing this in the forums! Looking forward to seeing what comes out of this.

Best.

Hex

@pjft The timing of this was awesome. I just finished PS by your help and @recompile ended up getting is working. I am of the opinion that pair programming is freaking awesome. It is way faster than if a single person were to do it. I will mostly archive these conversations in a README file once this is nearing an alpha release.

recompile

@hex said in Would you like to play Nokia (J2ME) games on Retropie?:

I also had a question about how audio will be handled. Will Java take care of it?

I don't know. I haven't even tried to properly implement audio yet. I would assume that it can be done on the java side.

@hex said in Would you like to play Nokia (J2ME) games on Retropie?:

Do you need joystick and mouse ? Considering no mobile phone had that.

Believe it or not, some games used a touchscreen. Doom II RPG isn't playable without it. Of course, it's the only game I know that requires it, so it's not exactly a priority.

As for joystick, I expect most people will want to play with their controller.

@hex said in Would you like to play Nokia (J2ME) games on Retropie?:

Some special key codes are >256

Not really a big deal to send a short instead of a byte. As long as it's consistent, it doesn't really matter. An int for type and an int for code if you want to really go wild.

I'm out for a few hours. I have to go earn a living.

Hex

@recompile I have updated the source code to have separate threads for Streaming (frames) and Capturing (keys).

C communicates all keyboard events over stdout as an (int) key code followed by \n
Key codes can be found here : https://wiki.libsdl.org/SDLKeycodeLookup

If F4 is received, C terminates cleanly. C also communicates that it received F4 by sending -1 as key code.

Another way to terminate C is to close its stdin. This tells C to terminate cleanly.

Is this sufficient?

To compile : g++ -lSDL2 -lpthread -o sdl_interface sdl_interface.cpp

Hex

This post is deleted!

recompile

@hex We'll need both keydown and keyup events.

Hex

@recompile Missed that. Will make changes and updoad new file.

Also how do you want the key up down difference? Your choice.

KEY 1 <-- Pressed
KEY 0 <-- lifted

recompile

@hex It doesn't really matter as long as I can tell the difference. A flag like that before the code should be just fine.

Hex

@recompile I have updated the code. Syntax is

KEY CODE\n

KEY = 1 : Down / 0 : Up
CODE -> As provided in url above

recompile

I guess back to you.
http://drichardson-shared.s3.amazonaws.com/freej2me-rpi.jar

I get a black screen and a mouse pointer.

Zigurana

This is great!
It's like witnessing the birth of a new emulator (not exactly, but close enough).

Keep up the momentum guys!

Hex

@recompile is there a syntax for that? I am getting an Array out of bounds exception

Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 0
	at org.recompile.freej2me.RetroPie.<init>(RetroPie.java:64)
	at org.recompile.freej2me.RetroPie.main(RetroPie.java:22)

Allanbuzzy

Yes, I'd love to play these mobile games on my RetroPie. And you probably know what my next splash screen might be...
wink